linux-kernel - [PATCH v10 0/4] Add basic node support for MediaTek MT8186 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220510075233.5426-1-allen-kh.cheng@mediatek.com>
Date:   Tue, 10 May 2022 15:52:29 +0800
From:   Allen-KH Cheng <allen-kh.cheng@...iatek.com>
To:     Matthias Brugger <matthias.bgg@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
CC:     <Project_Global_Chrome_Upstream_Group@...iatek.com>,
        <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-mediatek@...ts.infradead.org>,
        "Chen-Yu Tsai" <wenst@...omium.org>,
        Ryder Lee <ryder.lee@...nel.org>, <hsinyi@...omium.org>,
        Allen-KH Cheng <allen-kh.cheng@...iatek.com>
Subject: [PATCH v10 0/4] Add basic node support for MediaTek MT8186 SoC

MT8186 is a SoC based on 64bit ARMv8 architecture.
It contains 6 CA55 and 2 CA76 cores.
MT8186 share many HW IP with MT65xx series.

This patchset was tested on MT8186 evaluation board to shell.

Based on linux-next, tag: next-20220509

changes since v9:
 - add one space before equal sign of drive-strength-adv
 - corect compatible name for big cores (ca76)
 - use upper case of address in pinctrl
 - add pwrap node
 - add pwm node

changes since v8:
 - change name from pins_bus to pins-sda-scl
 - correct email address
 - add capacity-dmips-mhz for each CPU
 - add ppi-partitions in gic node
 - change name to power-domain
 - remove status "okay" in scp node
 - update timer and pericfg compatible in series

changes since v7:
 - add scp&auxadc node

changes since v6:
 - remove unnecessary blank line

changes since v5:
 - replace Mediatek a to MediaTek
 - use GPL-2.0-only OR BSD-2-Clause

changes since v4:
 - correct driver clock of mt8186
 - add power domains controller and clock controllers
 - add pinctrl, usb host, spi and i2c nodes
 - add node status in mt8186-evb.dts
 - correct some dtbs_check warnings

changes since v3:
 - remove serial, mmc and phy patch from series. (already merged)
 - remove mcusysoff node
 - move oscillator nodes at the head of dts
 - change name from usb-phy to t-phy

changes since v2:
 - add soc {} in mt8186.dtsi

changes since v1:
 - add dt-bindings: arm: Add compatible for MediaTek MT8186

Allen-KH Cheng (4):
  dt-bindings: timer: Add compatible for Mediatek MT8186
  dt-bindings: arm: mediatek: Add mt8186 pericfg compatible
  dt-bindings: arm: Add compatible for MediaTek MT8186
  arm64: dts: Add MediaTek SoC MT8186 dts and evaluation board and
    Makefile

 .../devicetree/bindings/arm/mediatek.yaml     |   4 +
 .../arm/mediatek/mediatek,pericfg.yaml        |   1 +
 .../bindings/timer/mediatek,mtk-timer.txt     |   1 +
 arch/arm64/boot/dts/mediatek/Makefile         |   1 +
 arch/arm64/boot/dts/mediatek/mt8186-evb.dts   | 232 ++++
 arch/arm64/boot/dts/mediatek/mt8186.dtsi      | 996 ++++++++++++++++++
 6 files changed, 1235 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8186.dtsi

-- 
2.18.0