[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220510124929.91000-8-robert.marko@sartura.hr>
Date: Tue, 10 May 2022 14:49:26 +0200
From: Robert Marko <robert.marko@...tura.hr>
To: robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
andrew@...n.ch, gregory.clement@...tlin.com,
sebastian.hesselbarth@...il.com, kostap@...vell.com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, pali@...nel.org,
marek.behun@....cz
Cc: Robert Marko <robert.marko@...tura.hr>
Subject: [PATCH v2 08/11] arm64: dts: marvell: rename temp sensor nodes
Rename the temperature sensor nodes to use "temp-sensor" which matches
their device class instead of IC specific naming.
Remove the status = "okay" which is not required as its default anyway.
Signed-off-by: Robert Marko <robert.marko@...tura.hr>
---
arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
index b89c7455612d..f21a855fc608 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -152,14 +152,12 @@ &i2c1 {
scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- nct375@48 {
- status = "okay";
+ temp-sensor@48 {
compatible = "ti,tmp75c";
reg = <0x48>;
};
- nct375@49 {
- status = "okay";
+ temp-sensor@49 {
compatible = "ti,tmp75c";
reg = <0x49>;
};
--
2.36.1
Powered by blists - more mailing lists