linux-kernel - Re: [PATCH v4 6/6] tpm, tpm_tis: Only enable supported IRQs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YnvRXiMxMRF3mIb8@kernel.org>
Date:   Wed, 11 May 2022 18:08:14 +0300
From:   Jarkko Sakkinen <jarkko@...nel.org>
To:     Lino Sanfilippo <LinoSanfilippo@....de>
Cc:     peterhuewe@....de, jgg@...pe.ca, stefanb@...ux.vnet.ibm.com,
        linux@...ewoehner.de, linux-integrity@...r.kernel.org,
        linux-kernel@...r.kernel.org, lukas@...ner.de,
        p.rosenberger@...bus.com, Lino Sanfilippo <l.sanfilippo@...bus.com>
Subject: Re: [PATCH v4 6/6] tpm, tpm_tis: Only enable supported IRQs

On Mon, May 09, 2022 at 10:05:59AM +0200, Lino Sanfilippo wrote:
> From: Lino Sanfilippo <l.sanfilippo@...bus.com>
> 
> Instead of blindly trying to enable all possible interrupts, use the result
> from the capability query and request only the interrupts that are actually
> supported.
> 
> Signed-off-by: Lino Sanfilippo <l.sanfilippo@...bus.com>
> ---
>  drivers/char/tpm/tpm_tis_core.c | 67 ++++++++++++++++++---------------
>  drivers/char/tpm/tpm_tis_core.h |  1 +
>  2 files changed, 37 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index 4c65718feb7d..784e153e2895 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -976,13 +976,46 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
>  		goto out_err;
>  	}
>  
> +	/* Figure out the capabilities */
> +	rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps);
> +	if (rc < 0)
> +		goto out_err;
> +
> +	dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
> +		intfcaps);
> +	if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
> +		dev_dbg(dev, "\tBurst Count Static\n");
> +	if (intfcaps & TPM_INTF_CMD_READY_INT) {
> +		priv->supported_irqs |= TPM_INTF_CMD_READY_INT;
> +		dev_dbg(dev, "\tCommand Ready Int Support\n");
> +	}
> +	if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
> +		dev_dbg(dev, "\tInterrupt Edge Falling\n");
> +	if (intfcaps & TPM_INTF_INT_EDGE_RISING)
> +		dev_dbg(dev, "\tInterrupt Edge Rising\n");
> +	if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
> +		dev_dbg(dev, "\tInterrupt Level Low\n");
> +	if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
> +		dev_dbg(dev, "\tInterrupt Level High\n");
> +	if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT) {
> +		priv->supported_irqs |= TPM_INTF_LOCALITY_CHANGE_INT;
> +		dev_dbg(dev, "\tLocality Change Int Support\n");
> +	}
> +	if (intfcaps & TPM_INTF_STS_VALID_INT) {
> +		priv->supported_irqs |= TPM_INTF_STS_VALID_INT;
> +		dev_dbg(dev, "\tSts Valid Int Support\n");
> +	}
> +	if (intfcaps & TPM_INTF_DATA_AVAIL_INT) {
> +		priv->supported_irqs |= TPM_INTF_DATA_AVAIL_INT;
> +		dev_dbg(dev, "\tData Avail Int Support\n");
> +	}
> +
>  	/* Take control of the TPM's interrupt hardware and shut it off */
>  	rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
>  	if (rc < 0)
>  		goto out_err;
>  
> -	intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
> -		   TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
> +	intmask |= priv->supported_irqs;
>  	intmask &= ~TPM_GLOBAL_INT_ENABLE;
>  
>  	tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
> @@ -1009,32 +1042,6 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
>  		goto out_err;
>  	}
>  
> -	/* Figure out the capabilities */
> -	rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps);
> -	if (rc < 0)
> -		goto out_err;
> -
> -	dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
> -		intfcaps);
> -	if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
> -		dev_dbg(dev, "\tBurst Count Static\n");
> -	if (intfcaps & TPM_INTF_CMD_READY_INT)
> -		dev_dbg(dev, "\tCommand Ready Int Support\n");
> -	if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
> -		dev_dbg(dev, "\tInterrupt Edge Falling\n");
> -	if (intfcaps & TPM_INTF_INT_EDGE_RISING)
> -		dev_dbg(dev, "\tInterrupt Edge Rising\n");
> -	if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
> -		dev_dbg(dev, "\tInterrupt Level Low\n");
> -	if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
> -		dev_dbg(dev, "\tInterrupt Level High\n");
> -	if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
> -		dev_dbg(dev, "\tLocality Change Int Support\n");
> -	if (intfcaps & TPM_INTF_STS_VALID_INT)
> -		dev_dbg(dev, "\tSts Valid Int Support\n");
> -	if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
> -		dev_dbg(dev, "\tData Avail Int Support\n");
> -
>  	/* INTERRUPT Setup */
>  	init_waitqueue_head(&priv->read_queue);
>  	init_waitqueue_head(&priv->int_queue);
> @@ -1101,9 +1108,7 @@ static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
>  	if (rc < 0)
>  		goto out;
>  
> -	intmask |= TPM_INTF_CMD_READY_INT
> -	    | TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
> -	    | TPM_INTF_STS_VALID_INT | TPM_GLOBAL_INT_ENABLE;
> +	intmask |= priv->supported_irqs | TPM_GLOBAL_INT_ENABLE;
>  
>  	tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
>  
> diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
> index c8972ea8e13e..3d6b05c6fdba 100644
> --- a/drivers/char/tpm/tpm_tis_core.h
> +++ b/drivers/char/tpm/tpm_tis_core.h
> @@ -97,6 +97,7 @@ struct tpm_tis_data {
>  	u16 manufacturer_id;
>  	int locality;
>  	int irq;
> +	unsigned int supported_irqs;
>  	unsigned long irqtest_flags;
>  	unsigned long flags;
>  	void __iomem *ilb_base_addr;
> -- 
> 2.36.0
> 

Does the existing code cause issues in a some specific environment?

BR, Jarkko