linux-kernel - [PATCH] pinctrl: renesas: pinctrl-rzg2l: Return -EINVAL for pins which have input disabled

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220511094057.3151-1-prabhakar.mahadev-lad.rj@bp.renesas.com>
Date:   Wed, 11 May 2022 10:40:57 +0100
From:   Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
To:     Geert Uytterhoeven <geert+renesas@...der.be>,
        Linus Walleij <linus.walleij@...aro.org>,
        linux-gpio@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
        Phil Edworthy <phil.edworthy@...esas.com>,
        Biju Das <biju.das.jz@...renesas.com>,
        Prabhakar <prabhakar.csengg@...il.com>,
        Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: [PATCH] pinctrl: renesas: pinctrl-rzg2l: Return -EINVAL for pins which have input disabled

Pin status reported by pinconf-pins file always reported pin status as
"input enabled" even for pins which had input disabled. Fix this by
returning -EINVAL for the pins which have input disabled.

Fixes: c4c4637eb57f2 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Reported-by: Phil Edworthy <phil.edworthy@...esas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index af2c739cdbaa..a63535ea47f5 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -527,6 +527,8 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 		if (!(cfg & PIN_CFG_IEN))
 			return -EINVAL;
 		arg = rzg2l_read_pin_config(pctrl, IEN(port_offset), bit, IEN_MASK);
+		if (!arg)
+			return -EINVAL;
 		break;
 
 	case PIN_CONFIG_POWER_SOURCE: {
-- 
2.25.1