linux-kernel - [PATCH] drivers: spi: cadence-quadspi: Handle spi_unregister

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 11 May 2022 17:25:16 +0530
From:   Vaishnav Achath <vaishnav.a@...com>
To:     <broonie@...nel.org>, <linux-spi@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
CC:     <vigneshr@...com>, <p.yadav@...com>, <j-keerthy@...com>,
        <vaishnav.a@...com>
Subject: [PATCH] drivers: spi: cadence-quadspi: Handle spi_unregister_master() in remove()

Currently devres managed removal of the spi_controller happens after
removing the power domain of the host platform_device.While this
does not affect the clean removal of the controller, but affects
graceful removal of the child devices if the child  device removal
requires issuing commands over SPI.

Eg. flash device being soft reset to 1S-1S-1S mode before removal
so that on next probe operations in 1S-1S-1S mode is successful.

Failure is seen when `rmmod spi-cadence-quadspi` is performed:

root@...evm:~# rmmod spi_cadence_quadspi
[ 49.230996] cadence-qspi 47050000.spi: QSPI is still busy after 500ms timeout.
[ 49.238209] spi-nor spi1.0: operation failed with -110
[ 49.244457] spi-nor spi1.0: Software reset failed: -110

and on subsequent modprobe the OSPI flash probe fails as it
is in 8D-8D-8D mode since the previous soft reset did not happen.

root@...evm:~# modprobe spi_cadence_quadspi
[ 73.253536] spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[ 73.260476] spi-nor: probe of spi0.0 failed with error -2

This commit adds necessary changes to perform spi_unregister_master()
in the host device remove() so that the child devices are gracefully
removed before the power domain is removed.

changes tested on J721E with mt35xu512aba flash.

Signed-off-by: Vaishnav Achath <vaishnav.a@...com>
---
 drivers/spi/spi-cadence-quadspi.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 19686fb47bb3..baf8559b553b 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -62,7 +62,7 @@ struct cqspi_flash_pdata {
 
 struct cqspi_st {
 	struct platform_device	*pdev;
-
+	struct spi_master	*master;
 	struct clk		*clk;
 	unsigned int		sclk;
 
@@ -1639,7 +1639,7 @@ static int cqspi_probe(struct platform_device *pdev)
 	int ret;
 	int irq;
 
-	master = spi_alloc_master(&pdev->dev, sizeof(*cqspi));
+	master = devm_spi_alloc_master(&pdev->dev, sizeof(*cqspi));
 	if (!master) {
 		dev_err(&pdev->dev, "spi_alloc_master failed\n");
 		return -ENOMEM;
@@ -1652,6 +1652,7 @@ static int cqspi_probe(struct platform_device *pdev)
 	cqspi = spi_master_get_devdata(master);
 
 	cqspi->pdev = pdev;
+	cqspi->master = master;
 	platform_set_drvdata(pdev, cqspi);
 
 	/* Obtain configuration from OF. */
@@ -1784,7 +1785,7 @@ static int cqspi_probe(struct platform_device *pdev)
 			goto probe_setup_failed;
 	}
 
-	ret = devm_spi_register_master(dev, master);
+	ret = spi_register_master(master);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register SPI ctlr %d\n", ret);
 		goto probe_setup_failed;
@@ -1807,6 +1808,7 @@ static int cqspi_remove(struct platform_device *pdev)
 {
 	struct cqspi_st *cqspi = platform_get_drvdata(pdev);
 
+	spi_unregister_master(cqspi->master);
 	cqspi_controller_enable(cqspi, 0);
 
 	if (cqspi->rx_chan)
-- 
2.17.1