lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 11 May 2022 20:28:05 +0800 From: Kai-Heng Feng <kai.heng.feng@...onical.com> To: jesse.brandeburg@...el.com, anthony.l.nguyen@...el.com Cc: Kai-Heng Feng <kai.heng.feng@...onical.com>, "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org, linux-kernel@...r.kernel.org Subject: [PATCH 2/2] igb: Make DMA faster when CPU is active on the PCIe link We found Intel I210 can only achieve ~750Mbps Tx speed on some platforms. The RR2DCDELAY shows around 0x2xxx DMA delay, which will be significantly lower when 1) ASPM is disabled or 2) SoC package c-state stays above PC3. When the RR2DCDELAY is around 0x1xxx the Tx speed can reach to ~950Mbps. According to the I210 datasheet "8.26.1 PCIe Misc. Register - PCIEMISC", "DMA Idle Indication" doesn't seem to tie to DMA coalesce anymore, so set it to 1b for "DMA is considered idle when there is no Rx or Tx AND when there are no TLPs indicating that CPU is active detected on the PCIe link (such as the host executes CSR or Configuration register read or write operation)" and performing Tx should also fall under "active CPU on PCIe link" case. In addition to that, commit b6e0c419f040 ("igb: Move DMA Coalescing init code to separate function.") seems to wrongly changed from enabling E1000_PCIEMISC_LX_DECISION to disabling it, also fix that. Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com> --- drivers/net/ethernet/intel/igb/igb_main.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 34b33b21e0dcd..eca797dded429 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -9897,11 +9897,10 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) struct e1000_hw *hw = &adapter->hw; u32 dmac_thr; u16 hwm; + u32 reg; if (hw->mac.type > e1000_82580) { if (adapter->flags & IGB_FLAG_DMAC) { - u32 reg; - /* force threshold to 0. */ wr32(E1000_DMCTXTH, 0); @@ -9934,7 +9933,6 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) /* Disable BMC-to-OS Watchdog Enable */ if (hw->mac.type != e1000_i354) reg &= ~E1000_DMACR_DC_BMC2OSW_EN; - wr32(E1000_DMACR, reg); /* no lower threshold to disable @@ -9951,12 +9949,12 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) */ wr32(E1000_DMCTXTH, (IGB_MIN_TXPBSIZE - (IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6); + } - /* make low power state decision controlled - * by DMA coal - */ + if (hw->mac.type >= e1000_i210 || + (adapter->flags & IGB_FLAG_DMAC)) { reg = rd32(E1000_PCIEMISC); - reg &= ~E1000_PCIEMISC_LX_DECISION; + reg |= E1000_PCIEMISC_LX_DECISION; wr32(E1000_PCIEMISC, reg); } /* endif adapter->dmac is not disabled */ } else if (hw->mac.type == e1000_82580) { -- 2.34.1
Powered by blists - more mailing lists