| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220512163327.2c86cab1@p-imbrenda>
Date: Thu, 12 May 2022 16:33:27 +0200
From: Claudio Imbrenda <imbrenda@...ux.ibm.com>
To: Steffen Eiden <seiden@...ux.ibm.com>
Cc: Greg KH <greg@...ah.com>, Heiko Carstens <hca@...ux.ibm.com>,
Alexander Gordeev <agordeev@...ux.ibm.com>,
Shuah Khan <shuah@...nel.org>,
Christian Borntraeger <borntraeger@...ux.ibm.com>,
Janosch Frank <frankja@...ux.ibm.com>,
David Hildenbrand <david@...hat.com>,
Nico Boehr <nrb@...ux.ibm.com>, linux-kernel@...r.kernel.org,
linux-kselftest@...r.kernel.org, kvm@...r.kernel.org
Subject: Re: [PATCH v4 1/2] drivers/s390/char: Add Ultravisor io device
On Tue, 10 May 2022 14:47:23 +0000
Steffen Eiden <seiden@...ux.ibm.com> wrote:
> This patch adds a new miscdevice to expose some Ultravisor functions
> to userspace. Userspace can send IOCTLs to the uvdevice that will then
> emit a corresponding Ultravisor Call and hands the result over to
> userspace. The uvdevice is available if the Ultravisor Call facility is
> present.
> Userspace can call the Retrieve Attestation Measurement
> Ultravisor Call using IOCTLs on the uvdevice.
>
> The uvdevice will do some sanity checks first.
> Then, copy the request data to kernel space, build the UVCB,
> perform the UV call, and copy the result back to userspace.
>
> Signed-off-by: Steffen Eiden <seiden@...ux.ibm.com>
> Reviewed-by: Janosch Frank <frankja@...ux.ibm.com>
> ---
> MAINTAINERS | 2 +
> arch/s390/include/asm/uv.h | 23 ++-
> arch/s390/include/uapi/asm/uvdevice.h | 51 +++++
> drivers/s390/char/Kconfig | 10 +
> drivers/s390/char/Makefile | 1 +
> drivers/s390/char/uvdevice.c | 264 ++++++++++++++++++++++++++
> 6 files changed, 350 insertions(+), 1 deletion(-)
> create mode 100644 arch/s390/include/uapi/asm/uvdevice.h
> create mode 100644 drivers/s390/char/uvdevice.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e8c52d0192a6..b42ab4a35e18 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10781,9 +10781,11 @@ F: Documentation/virt/kvm/s390*
> F: arch/s390/include/asm/gmap.h
> F: arch/s390/include/asm/kvm*
> F: arch/s390/include/uapi/asm/kvm*
> +F: arch/s390/include/uapi/asm/uvdevice.h
> F: arch/s390/kernel/uv.c
> F: arch/s390/kvm/
> F: arch/s390/mm/gmap.c
> +F: drivers/s390/char/uvdevice.c
> F: tools/testing/selftests/kvm/*/s390x/
> F: tools/testing/selftests/kvm/s390x/
>
> diff --git a/arch/s390/include/asm/uv.h b/arch/s390/include/asm/uv.h
> index a2d376b8bce3..cfea7b77a5b8 100644
> --- a/arch/s390/include/asm/uv.h
> +++ b/arch/s390/include/asm/uv.h
> @@ -2,7 +2,7 @@
> /*
> * Ultravisor Interfaces
> *
> - * Copyright IBM Corp. 2019
> + * Copyright IBM Corp. 2019, 2022
> *
> * Author(s):
> * Vasily Gorbik <gor@...ux.ibm.com>
> @@ -52,6 +52,7 @@
> #define UVC_CMD_UNPIN_PAGE_SHARED 0x0342
> #define UVC_CMD_SET_SHARED_ACCESS 0x1000
> #define UVC_CMD_REMOVE_SHARED_ACCESS 0x1001
> +#define UVC_CMD_RETR_ATTEST 0x1020
>
> /* Bits in installed uv calls */
> enum uv_cmds_inst {
> @@ -76,6 +77,7 @@ enum uv_cmds_inst {
> BIT_UVC_CMD_UNSHARE_ALL = 20,
> BIT_UVC_CMD_PIN_PAGE_SHARED = 21,
> BIT_UVC_CMD_UNPIN_PAGE_SHARED = 22,
> + BIT_UVC_CMD_RETR_ATTEST = 28,
> };
>
> enum uv_feat_ind {
> @@ -219,6 +221,25 @@ struct uv_cb_share {
> u64 reserved28;
> } __packed __aligned(8);
>
> +/* Retrieve Attestation Measurement */
> +struct uv_cb_attest {
> + struct uv_cb_header header; /* 0x0000 */
> + u64 reserved08[2]; /* 0x0008 */
> + u64 arcb_addr; /* 0x0018 */
> + u64 cont_token; /* 0x0020 */
> + u8 reserved28[6]; /* 0x0028 */
> + u16 user_data_len; /* 0x002e */
> + u8 user_data[256]; /* 0x0030 */
> + u32 reserved130[3]; /* 0x0130 */
> + u32 meas_len; /* 0x013c */
> + u64 meas_addr; /* 0x0140 */
> + u8 config_uid[16]; /* 0x0148 */
> + u32 reserved158; /* 0x0158 */
> + u32 add_data_len; /* 0x015c */
> + u64 add_data_addr; /* 0x0160 */
> + u64 reserved168[4]; /* 0x0168 */
> +} __packed __aligned(8);
> +
> static inline int __uv_call(unsigned long r1, unsigned long r2)
> {
> int cc;
> diff --git a/arch/s390/include/uapi/asm/uvdevice.h b/arch/s390/include/uapi/asm/uvdevice.h
> new file mode 100644
> index 000000000000..d0bdde4969a1
> --- /dev/null
> +++ b/arch/s390/include/uapi/asm/uvdevice.h
> @@ -0,0 +1,51 @@
> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> +/*
> + * Copyright IBM Corp. 2022
> + * Author(s): Steffen Eiden <seiden@...ux.ibm.com>
> + */
> +#ifndef __S390_ASM_UVDEVICE_H
> +#define __S390_ASM_UVDEVICE_H
> +
> +#include <linux/types.h>
> +
> +struct uvio_ioctl_cb {
> + __u32 flags;
> + __u16 uv_rc; /* UV header rc value */
> + __u16 uv_rrc; /* UV header rrc value */
> + __u64 argument_addr; /* Userspace address of uvio argument */
> + __u32 argument_len;
> + __u8 reserved14[0x40 - 0x14]; /* must be zero */
> +};
> +
> +#define UVIO_ATT_USER_DATA_LEN 0x100
> +#define UVIO_ATT_UID_LEN 0x10
> +struct uvio_attest {
> + __u64 arcb_addr; /* 0x0000 */
> + __u64 meas_addr; /* 0x0008 */
> + __u64 add_data_addr; /* 0x0010 */
> + __u8 user_data[UVIO_ATT_USER_DATA_LEN]; /* 0x0018 */
> + __u8 config_uid[UVIO_ATT_UID_LEN]; /* 0x0118 */
> + __u32 arcb_len; /* 0x0128 */
> + __u32 meas_len; /* 0x012c */
> + __u32 add_data_len; /* 0x0130 */
> + __u16 user_data_len; /* 0x0134 */
> + __u16 reserved136; /* 0x0136 */
> +};
> +
> +/*
> + * The following max values define an upper length for the IOCTL in/out buffers.
> + * However, they do not represent the maximum the Ultravisor allows which is
> + * often way smaller. By allowing larger buffer sizes we hopefully do not need
> + * to update the code with every machine update. It is therefore possible for
> + * userspace to request more memory than actually used by kernel/UV.
> + */
> +#define UVIO_ATT_ARCB_MAX_LEN 0x100000
> +#define UVIO_ATT_MEASUREMENT_MAX_LEN 0x8000
> +#define UVIO_ATT_ADDITIONAL_MAX_LEN 0x8000
> +
> +#define UVIO_DEVICE_NAME "uv"
> +#define UVIO_TYPE_UVC 'u'
> +
> +#define UVIO_IOCTL_ATT _IOWR(UVIO_TYPE_UVC, 0x01, struct uvio_ioctl_cb)
> +
> +#endif /* __S390_ASM_UVDEVICE_H */
> diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig
> index 6cc4b19acf85..e9b9902abbaf 100644
> --- a/drivers/s390/char/Kconfig
> +++ b/drivers/s390/char/Kconfig
> @@ -100,6 +100,16 @@ config SCLP_OFB
> This option enables the Open-for-Business interface to the s390
> Service Element.
>
> +config S390_UV_UAPI
> + def_tristate y
> + prompt "Ultravisor userspace API"
> + help
> + Selecting exposes parts of the UV interface to userspace
> + by providing a misc character device at /dev/uv.
> + Using IOCTLs one can interact with the UV.
> + The device is only available if the Ultravisor
> + Facility (158) is present.
> +
> config S390_TAPE
> def_tristate m
> prompt "S/390 tape device support"
> diff --git a/drivers/s390/char/Makefile b/drivers/s390/char/Makefile
> index c6fdb81a068a..ce32270082f5 100644
> --- a/drivers/s390/char/Makefile
> +++ b/drivers/s390/char/Makefile
> @@ -48,6 +48,7 @@ obj-$(CONFIG_MONREADER) += monreader.o
> obj-$(CONFIG_MONWRITER) += monwriter.o
> obj-$(CONFIG_S390_VMUR) += vmur.o
> obj-$(CONFIG_CRASH_DUMP) += sclp_sdias.o zcore.o
> +obj-$(CONFIG_S390_UV_UAPI) += uvdevice.o
>
> hmcdrv-objs := hmcdrv_mod.o hmcdrv_dev.o hmcdrv_ftp.o hmcdrv_cache.o diag_ftp.o sclp_ftp.o
> obj-$(CONFIG_HMC_DRV) += hmcdrv.o
> diff --git a/drivers/s390/char/uvdevice.c b/drivers/s390/char/uvdevice.c
> new file mode 100644
> index 000000000000..bcada86e8fc4
> --- /dev/null
> +++ b/drivers/s390/char/uvdevice.c
> @@ -0,0 +1,264 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright IBM Corp. 2022
> + * Author(s): Steffen Eiden <seiden@...ux.ibm.com>
> + *
> + * This file provides a Linux misc device to give userspace access to some
> + * Ultravisor (UV) functions. The device only accepts IOCTLs and will only
> + * be present if the Ultravisor facility (158) is present.
> + *
> + * When userspace sends a valid IOCTL uvdevice will copy the input data to
> + * kernel space, do some basic validity checks to avoid kernel/system
> + * corruption. Any other check that the Ultravisor does will not be done by
> + * the uvdevice to keep changes minimal when adding new functionalities
> + * to existing UV-calls.
> + * After the checks uvdevice builds a corresponding
> + * Ultravisor Call Control Block, and sends the request to the Ultravisor.
> + * Then, it copies the response, including the return codes, back to userspace.
> + * It is the responsibility of the userspace to check for any error issued
> + * by UV and to interpret the UV response. The uvdevice acts as a communication
> + * channel for userspace to the Ultravisor.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/miscdevice.h>
> +#include <linux/types.h>
> +#include <linux/stddef.h>
> +#include <linux/vmalloc.h>
> +#include <linux/slab.h>
> +
> +#include <asm/uvdevice.h>
> +#include <asm/uv.h>
> +
> +static int uvio_build_uvcb_attest(struct uv_cb_attest *uvcb_attest, u8 *arcb,
> + u8 *meas, u8 *add_data, struct uvio_attest *uvio_attest)
> +{
> + void __user *user_buf_arcb = (void __user *)uvio_attest->arcb_addr;
> +
> + if (copy_from_user(arcb, user_buf_arcb, uvio_attest->arcb_len))
> + return -EFAULT;
> +
> + uvcb_attest->header.len = sizeof(*uvcb_attest);
> + uvcb_attest->header.cmd = UVC_CMD_RETR_ATTEST;
> + uvcb_attest->arcb_addr = (u64)arcb;
> + uvcb_attest->cont_token = 0;
> + uvcb_attest->user_data_len = uvio_attest->user_data_len;
> + memcpy(uvcb_attest->user_data, uvio_attest->user_data, sizeof(uvcb_attest->user_data));
> + uvcb_attest->meas_len = uvio_attest->meas_len;
> + uvcb_attest->meas_addr = (u64)meas;
> + uvcb_attest->add_data_len = uvio_attest->add_data_len;
> + uvcb_attest->add_data_addr = (u64)add_data;
> +
> + return 0;
> +}
> +
> +static int uvio_copy_attest_result_to_user(struct uv_cb_attest *uvcb_attest,
> + struct uvio_ioctl_cb *uv_ioctl,
> + u8 *measurement, u8 *add_data,
> + struct uvio_attest *uvio_attest)
> +{
> + struct uvio_attest __user *user_uvio_attest = (void __user *)uv_ioctl->argument_addr;
> + void __user *user_buf_add = (void __user *)uvio_attest->add_data_addr;
> + void __user *user_buf_meas = (void __user *)uvio_attest->meas_addr;
> + void __user *user_buf_uid = &user_uvio_attest->config_uid;
> +
> + if (copy_to_user(user_buf_meas, measurement, uvio_attest->meas_len))
> + return -EFAULT;
> + if (add_data && copy_to_user(user_buf_add, add_data, uvio_attest->add_data_len))
> + return -EFAULT;
> + if (copy_to_user(user_buf_uid, uvcb_attest->config_uid, sizeof(uvcb_attest->config_uid)))
> + return -EFAULT;
> + return 0;
> +}
> +
> +static int get_uvio_attest(struct uvio_ioctl_cb *uv_ioctl, struct uvio_attest *uvio_attest)
> +{
> + u8 __user *user_arg_buf = (u8 __user *)uv_ioctl->argument_addr;
> +
> + if (copy_from_user(uvio_attest, user_arg_buf, sizeof(*uvio_attest)))
> + return -EFAULT;
> +
> + if (uvio_attest->arcb_len > UVIO_ATT_ARCB_MAX_LEN)
> + return -EINVAL;
> + if (uvio_attest->arcb_len == 0)
> + return -EINVAL;
> + if (uvio_attest->meas_len > UVIO_ATT_MEASUREMENT_MAX_LEN)
> + return -EINVAL;
> + if (uvio_attest->meas_len == 0)
> + return -EINVAL;
> + if (uvio_attest->add_data_len > UVIO_ATT_ADDITIONAL_MAX_LEN)
> + return -EINVAL;
> + if (uvio_attest->reserved136)
> + return -EINVAL;
> + return 0;
> +}
> +
> +/**
> + * uvio_attestation() - Perform a Retrieve Attestation Measurement UVC.
> + *
> + * @uv_ioctl: ioctl control block
> + *
> + * uvio_attestation() does a Retrieve Attestation Measurement Ultravisor Call.
> + * It verifies that the given userspace addresses are valid and request sizes
> + * are sane. Every other check is made by the Ultravisor (UV) and won't result
> + * in a negative return value. It copies the input to kernelspace, builds the
> + * request, sends the UV-call, and copies the result to userspace.
> + *
> + * The Attestation Request has two input and two outputs.
> + * ARCB and User Data are inputs for the UV generated by userspace.
> + * Measurement and Additional Data are outputs for userspace generated by UV.
> + *
> + * The Attestation Request Control Block (ARCB) is a cryptographically verified
> + * and secured request to UV and User Data is some plaintext data which is
> + * going to be included in the Attestation Measurement calculation.
> + *
> + * Measurement is a cryptographic measurement of the callers properties,
> + * optional data configured by the ARCB and the user data. If specified by the
> + * ARCB, UV will add some Additional Data to the measurement calculation.
> + * This Additional Data is then returned as well.
> + *
> + * If the Retrieve Attestation Measurement UV facility is not present,
> + * UV will return invalid command rc. This won't be fenced in the driver
> + * and does not result in a negative return value.
> + *
> + * Context: might sleep
> + *
> + * Return: 0 on success or a negative error code on error.
> + */
> +static int uvio_attestation(struct uvio_ioctl_cb *uv_ioctl)
> +{
> + struct uv_cb_attest *uvcb_attest = NULL;
> + struct uvio_attest *uvio_attest = NULL;
> + u8 *measurement = NULL;
> + u8 *add_data = NULL;
> + u8 *arcb = NULL;
> + int ret;
> +
> + ret = -EINVAL;
> + if (uv_ioctl->argument_len != sizeof(*uvio_attest))
> + goto out;
> +
> + ret = -ENOMEM;
> + uvio_attest = kzalloc(sizeof(*uvio_attest), GFP_KERNEL);
> + if (!uvio_attest)
> + goto out;
> +
> + ret = get_uvio_attest(uv_ioctl, uvio_attest);
> + if (ret)
> + goto out;
> +
> + ret = -ENOMEM;
> + arcb = kvzalloc(uvio_attest->arcb_len, GFP_KERNEL);
> + measurement = kvzalloc(uvio_attest->meas_len, GFP_KERNEL);
> + if (!arcb || !measurement)
> + goto out;
> +
> + if (uvio_attest->add_data_len) {
> + add_data = kvzalloc(uvio_attest->add_data_len, GFP_KERNEL);
> + if (!add_data)
> + goto out;
> + }
> +
> + uvcb_attest = kzalloc(sizeof(*uvcb_attest), GFP_KERNEL);
> + if (!uvcb_attest)
> + goto out;
> +
> + ret = uvio_build_uvcb_attest(uvcb_attest, arcb, measurement, add_data, uvio_attest);
> + if (ret)
> + goto out;
> +
> + uv_call_sched(0, (u64)uvcb_attest);
> +
> + uv_ioctl->uv_rc = uvcb_attest->header.rc;
> + uv_ioctl->uv_rrc = uvcb_attest->header.rrc;
> +
> + ret = uvio_copy_attest_result_to_user(uvcb_attest, uv_ioctl, measurement, add_data,
> + uvio_attest);
> +out:
> + kvfree(arcb);
> + kvfree(measurement);
> + kvfree(add_data);
> + kfree(uvio_attest);
> + kfree(uvcb_attest);
> + return ret;
> +}
> +
> +static int uvio_copy_and_check_ioctl(struct uvio_ioctl_cb *ioctl, void __user *argp)
> +{
> + if (copy_from_user(ioctl, argp, sizeof(*ioctl)))
> + return -EFAULT;
> + if (ioctl->flags != 0)
> + return -EINVAL;
> + if (memchr_inv(ioctl->reserved14, 0, sizeof(ioctl->reserved14)))
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +/*
> + * IOCTL entry point for the Ultravisor device.
> + */
> +static long uvio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
> +{
> + void __user *argp = (void __user *)arg;
> + struct uvio_ioctl_cb *uv_ioctl;
> + long ret;
> +
> + ret = -ENOMEM;
> + uv_ioctl = vzalloc(sizeof(*uv_ioctl));
struct uvio_ioctl_cb is rather small, couldn't you just allocate it on
the stack?
> + if (!uv_ioctl)
> + goto out;
> +
> + switch (cmd) {
> + case UVIO_IOCTL_ATT:
> + ret = uvio_copy_and_check_ioctl(uv_ioctl, argp);
> + if (ret)
> + goto out;
> + ret = uvio_attestation(uv_ioctl);
> + break;
> + default:
> + ret = -ENOIOCTLCMD;
> + break;
> + }
> + if (ret)
> + goto out;
> +
> + if (copy_to_user(argp, uv_ioctl, sizeof(*uv_ioctl)))
> + ret = -EFAULT;
> +
> + out:
> + vfree(uv_ioctl);
> + return ret;
> +}
> +
> +static const struct file_operations uvio_dev_fops = {
> + .owner = THIS_MODULE,
> + .unlocked_ioctl = uvio_ioctl,
> + .llseek = no_llseek,
> +};
> +
> +static struct miscdevice uvio_dev_miscdev = {
> + .minor = MISC_DYNAMIC_MINOR,
> + .name = UVIO_DEVICE_NAME,
> + .fops = &uvio_dev_fops,
> +};
> +
> +static void __exit uvio_dev_exit(void)
> +{
> + misc_deregister(&uvio_dev_miscdev);
> +}
> +
> +static int __init uvio_dev_init(void)
> +{
> + if (!test_facility(158))
> + return -ENXIO;
> + return misc_register(&uvio_dev_miscdev);
> +}
> +
> +module_init(uvio_dev_init);
> +module_exit(uvio_dev_exit);
> +
> +MODULE_AUTHOR("IBM Corporation");
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Ultravisor UAPI driver");
Powered by blists - more mailing lists