| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220512174602.GA10124@pengutronix.de>
Date: Thu, 12 May 2022 19:46:02 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Oliver Hartkopp <socketcan@...tkopp.net>
Cc: Wolfgang Grandegger <wg@...ndegger.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-can@...r.kernel.org,
kernel@...gutronix.de, David Jander <david@...tonic.nl>,
Devid Antonio Filoni <devid.filoni@...uetechnologies.com>
Subject: Re: [PATCH v2] can: skb: add extended skb support
Hi Oliver,
On Thu, May 12, 2022 at 06:54:46PM +0200, Oliver Hartkopp wrote:
> Hi Oleksij,
>
> On 12.05.22 14:59, Oleksij Rempel wrote:
> > Add CAN specific skb extension support and add first currently needed
> > local_origin variable.
> >
> > On the CAN stack we push same skb data in different direction depending
> > on the interface type:
> > - to the HW egress and at same time back to the stack as echo
> > - over virtual vcan/vxcan interfaces as egress on one side and ingress on other
> > side of the vxcan tunnel.
> > We can't use skb->sk as marker of the origin, because not all packets
> > not all packets with local_origin are assigned to some socket. Some of
> > them are generate from the kernel, for example like J1939 control messages.
> > So, to properly detect flow direction is is better to store this information
> > as part of the SKB.
> >
> > The advantage of using skb_ext is that it is options and extendable
> > without affecting other skb users. It can be shared between cloned skbs and
> > duplicated only if needed.
> >
> > Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> > Cc: Devid Antonio Filoni <devid.filoni@...uetechnologies.com>
> > ---
> > changes v2:
> > - migrate it to SKB_EXT
>
> The use of SKB_EXT seems to be very costly to just store a boolean value.
>
> What I could see from some of the other SKB_EXT users this extension (which
> performs alloc & COW) is used in special circumstances.
>
> With your suggestion this additional effort is needed for every CAN related
> skb.
>
> So at least for this use-case extending struct can_skb_priv seems to be more
> efficient.
>
> https://elixir.bootlin.com/linux/latest/source/include/linux/can/skb.h#L44
>
> We might get into problems with PF_PACKET sockets when extending the
> can_skb_priv length beyond HH_DATA_MOD, see:
>
> https://elixir.bootlin.com/linux/latest/source/include/linux/can/skb.h#L99
>
> But for now I'm not sure that SKB_EXT isn't too heavy to store that single
> flag.
Yes, I was thinking about potential overkill for, currently, just one
bit of storage. But here is my motivation:
CAN frameworks is currently using two ways to store metaadata (expecpt
of SKB):
1. skb->cb. This variant is not extendable and can be used only insight
of one driver.
2. can_skb_priv as part of skb->data->head. Is potentially extendable
but we will need to use skb_copy instead of skb_clone. Because we
can't modify head for clone only. IMO, this will add potentially more
overhead than SKB_EXT.
In long term, as soon as we will need to extend can specific meta
data, we will have same situation: it will be not big enough to migrate
to SKB_EXT. Maybe we need to move can_skb_priv to SKB_EXT as well?
> >
> > drivers/net/can/vxcan.c | 4 ++++
> > include/linux/can/skb.h | 4 ++++
> > include/linux/skbuff.h | 3 +++
> > net/can/Kconfig | 1 +
> > net/can/af_can.c | 5 +++++
> > net/can/raw.c | 10 ++++++++--
> > net/core/skbuff.c | 7 +++++++
> > 7 files changed, 32 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/net/can/vxcan.c b/drivers/net/can/vxcan.c
> > index 577a80300514..93701a698008 100644
> > --- a/drivers/net/can/vxcan.c
> > +++ b/drivers/net/can/vxcan.c
> > @@ -39,6 +39,7 @@ static netdev_tx_t vxcan_xmit(struct sk_buff *oskb, struct net_device *dev)
> > struct net_device *peer;
> > struct canfd_frame *cfd = (struct canfd_frame *)oskb->data;
> > struct net_device_stats *peerstats, *srcstats = &dev->stats;
> > + struct can_skb_ext *can_ext;
> > struct sk_buff *skb;
> > u8 len;
> > @@ -66,6 +67,9 @@ static netdev_tx_t vxcan_xmit(struct sk_buff *oskb, struct net_device *dev)
> > skb->pkt_type = PACKET_BROADCAST;
> > skb->dev = peer;
> > skb->ip_summed = CHECKSUM_UNNECESSARY;
> > + can_ext = skb_ext_add(skb, SKB_EXT_CAN);
> > + if (can_ext)
> > + can_ext->local_origin = false;
> > len = cfd->can_id & CAN_RTR_FLAG ? 0 : cfd->len;
> > if (netif_rx(skb) == NET_RX_SUCCESS) {
> > diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h
> > index fdb22b00674a..401b08890d74 100644
> > --- a/include/linux/can/skb.h
> > +++ b/include/linux/can/skb.h
> > @@ -55,6 +55,10 @@ struct can_skb_priv {
> > struct can_frame cf[];
> > };
> > +struct can_skb_ext {
> > + bool local_origin;
> > +};
> > +
> > static inline struct can_skb_priv *can_skb_prv(struct sk_buff *skb)
> > {
> > return (struct can_skb_priv *)(skb->head);
> > diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
> > index 3270cb72e4d8..d39e70e5f7f2 100644
> > --- a/include/linux/skbuff.h
> > +++ b/include/linux/skbuff.h
> > @@ -4563,6 +4563,9 @@ enum skb_ext_id {
> > #endif
> > #if IS_ENABLED(CONFIG_MCTP_FLOWS)
> > SKB_EXT_MCTP,
> > +#endif
> > +#if IS_ENABLED(CONFIG_CAN)
> > + SKB_EXT_CAN,
> > #endif
> > SKB_EXT_NUM, /* must be last */
> > };
> > diff --git a/net/can/Kconfig b/net/can/Kconfig
> > index a9ac5ffab286..eb826e3771fe 100644
> > --- a/net/can/Kconfig
> > +++ b/net/can/Kconfig
> > @@ -5,6 +5,7 @@
> > menuconfig CAN
> > tristate "CAN bus subsystem support"
> > + select SKB_EXTENSIONS
> > help
> > Controller Area Network (CAN) is a slow (up to 1Mbit/s) serial
> > communications protocol. Development of the CAN bus started in
> > diff --git a/net/can/af_can.c b/net/can/af_can.c
> > index 1fb49d51b25d..329c540d3ddf 100644
> > --- a/net/can/af_can.c
> > +++ b/net/can/af_can.c
> > @@ -201,6 +201,7 @@ int can_send(struct sk_buff *skb, int loop)
> > struct sk_buff *newskb = NULL;
> > struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
> > struct can_pkg_stats *pkg_stats = dev_net(skb->dev)->can.pkg_stats;
> > + struct can_skb_ext *can_ext;
> > int err = -EINVAL;
> > if (skb->len == CAN_MTU) {
> > @@ -240,6 +241,10 @@ int can_send(struct sk_buff *skb, int loop)
> > skb_reset_network_header(skb);
> > skb_reset_transport_header(skb);
> > + can_ext = skb_ext_add(skb, SKB_EXT_CAN);
> > + if (can_ext)
> > + can_ext->local_origin = true;
> > +
> > if (loop) {
> > /* local loopback of sent CAN frames */
> > diff --git a/net/can/raw.c b/net/can/raw.c
> > index b7dbb57557f3..cba18cdf017f 100644
> > --- a/net/can/raw.c
> > +++ b/net/can/raw.c
> > @@ -121,6 +121,7 @@ static void raw_rcv(struct sk_buff *oskb, void *data)
> > {
> > struct sock *sk = (struct sock *)data;
> > struct raw_sock *ro = raw_sk(sk);
> > + struct can_skb_ext *can_ext;
> > struct sockaddr_can *addr;
> > struct sk_buff *skb;
> > unsigned int *pflags;
> > @@ -173,8 +174,13 @@ static void raw_rcv(struct sk_buff *oskb, void *data)
> > /* add CAN specific message flags for raw_recvmsg() */
> > pflags = raw_flags(skb);
> > *pflags = 0;
> > - if (oskb->sk)
> > - *pflags |= MSG_DONTROUTE;
> > +
> > + can_ext = skb_ext_find(oskb, SKB_EXT_CAN);
> > + if (can_ext) {
> > + if (can_ext->local_origin)
> > + *pflags |= MSG_DONTROUTE;
> > + }
> > +
> > if (oskb->sk == sk)
> > *pflags |= MSG_CONFIRM;
> > diff --git a/net/core/skbuff.c b/net/core/skbuff.c
> > index 475183f37891..5a5409ccb767 100644
> > --- a/net/core/skbuff.c
> > +++ b/net/core/skbuff.c
> > @@ -61,6 +61,7 @@
> > #include <linux/if_vlan.h>
> > #include <linux/mpls.h>
> > #include <linux/kcov.h>
> > +#include <linux/can/skb.h>
> > #include <net/protocol.h>
> > #include <net/dst.h>
> > @@ -4338,6 +4339,9 @@ static const u8 skb_ext_type_len[] = {
> > #if IS_ENABLED(CONFIG_MCTP_FLOWS)
> > [SKB_EXT_MCTP] = SKB_EXT_CHUNKSIZEOF(struct mctp_flow),
> > #endif
> > +#if IS_ENABLED(CONFIG_CAN)
> > + [SKB_EXT_CAN] = SKB_EXT_CHUNKSIZEOF(struct can_skb_ext),
> > +#endif
> > };
> > static __always_inline unsigned int skb_ext_total_length(void)
> > @@ -4357,6 +4361,9 @@ static __always_inline unsigned int skb_ext_total_length(void)
> > #endif
> > #if IS_ENABLED(CONFIG_MCTP_FLOWS)
> > skb_ext_type_len[SKB_EXT_MCTP] +
> > +#endif
> > +#if IS_ENABLED(CONFIG_CAN)
> > + skb_ext_type_len[SKB_EXT_CAN] +
> > #endif
> > 0;
> > }
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists