linux-kernel - [PATCH 5/7] arm64: dts: mediatek: mt6795: Add fixed clocks for 32kHz and 26MHz XOs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220513171617.504430-6-angelogioacchino.delregno@collabora.com>
Date:   Fri, 13 May 2022 19:16:15 +0200
From:   AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>
To:     robh+dt@...nel.org
Cc:     krzysztof.kozlowski+dt@...aro.org, matthias.bgg@...il.com,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
        konrad.dybcio@...ainline.org, marijn.suijten@...ainline.org,
        martin.botka@...ainline.org, ~postmarketos/upstreaming@...ts.sr.ht,
        phone-devel@...r.kernel.org, paul.bouchara@...ainline.org,
        kernel@...labora.com,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>
Subject: [PATCH 5/7] arm64: dts: mediatek: mt6795: Add fixed clocks for 32kHz and 26MHz XOs

Add the 32kHz and 26MHz oscillators as fixed clocks in devicetree to
provide a good initial clock spec, since this SoC features two always
on oscillators running at the aforementioned frequencies.
While at it, since the UART clock is actually referring to the 26MHz
oscillator, remove it and assign clk26m as "baud" clock for the UARTs.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
---
 arch/arm64/boot/dts/mediatek/mt6795.dtsi | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
index 363fa25b4edc..b6f7681cc151 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -142,21 +142,23 @@ l2_1: l2-cache1 {
 		};
 	};
 
-	system_clk: dummy13m {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
 		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
 	};
 
-	rtc_clk: dummy32k {
+	clk32k: oscillator-32k {
 		compatible = "fixed-clock";
-		clock-frequency = <32000>;
 		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "clk32k";
 	};
 
-	uart_clk: dummy26m {
+	system_clk: dummy13m {
 		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
+		clock-frequency = <13000000>;
 		#clock-cells = <0>;
 	};
 
@@ -221,7 +223,7 @@ uart0: serial@...02000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x400>;
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&clk26m>;
 			status = "disabled";
 		};
 
@@ -230,7 +232,7 @@ uart1: serial@...03000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x400>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&clk26m>;
 			status = "disabled";
 		};
 
@@ -239,7 +241,7 @@ uart2: serial@...04000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x400>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&clk26m>;
 			status = "disabled";
 		};
 
@@ -248,7 +250,7 @@ uart3: serial@...05000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11005000 0 0x400>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&clk26m>;
 			status = "disabled";
 		};
 	};
-- 
2.35.1