linux-kernel - Re: [PATCH] ath10k: do not enforce interrupt trigger type

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <3d856d44-a2d6-b5b8-ec78-ce19a3686986@kali.org>
Date:   Sat, 14 May 2022 00:05:46 -0500
From:   Steev Klimaszewski <steev@...i.org>
To:     Kalle Valo <kvalo@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc:     "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Govind Singh <govinds@...eaurora.org>,
        ath10k@...ts.infradead.org, linux-wireless@...r.kernel.org,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH] ath10k: do not enforce interrupt trigger type


On 5/13/22 10:57 AM, Kalle Valo wrote:
> Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org> writes:
>
>> Interrupt line can be configured on different hardware in different way,
>> even inverted.  Therefore driver should not enforce specific trigger
>> type - edge rising - but instead rely on Devicetree to configure it.
>>
>> All Qualcomm DTSI with WCN3990 define the interrupt type as level high,
>> so the mismatch between DTSI and driver causes rebind issues:
>>
>>    $ echo 18800000.wifi > /sys/bus/platform/drivers/ath10k_snoc/unbind
>>    $ echo 18800000.wifi > /sys/bus/platform/drivers/ath10k_snoc/bind
>>    [   44.763114] irq: type mismatch, failed to map hwirq-446 for interrupt-controller@...00000!
>>    [   44.763130] ath10k_snoc 18800000.wifi: error -ENXIO: IRQ index 0 not found
>>    [   44.763140] ath10k_snoc 18800000.wifi: failed to initialize resource: -6
> So you tested on WCN3990? On what firmware version? I can add the
> Tested-on tag if you provide that.
>
Hello Krzystof, Kalle,

I have seen this issue as well on a Lenovo Flex 5G, which has a WCN3990:

wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
firmware ver  api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 
b3d4b790
htt-ver 3.86 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1

With this patch applied, I no longer see the error message in the commit 
message, when I unbind/bind when wifi stops working.

Tested-by: Steev Klimaszewski <steev@...i.org>

-- Steev