| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7b18962e-d1ce-699f-dd59-719255f19ade@sholland.org>
Date: Sun, 15 May 2022 11:03:47 -0500
From: Samuel Holland <samuel@...lland.org>
To: Stafford Horne <shorne@...il.com>
Cc: LKML <linux-kernel@...r.kernel.org>,
Jonas Bonn <jonas@...thpole.se>,
Openrisc <openrisc@...ts.librecores.org>,
Randy Dunlap <rdunlap@...radead.org>
Subject: Re: [PATCH 02/13] openrisc: Cleanup emergency print handling
Hi Stafford,
On 5/15/22 7:41 AM, Stafford Horne wrote:
> The emergency print support only works for 8250 compatible serial ports.
> Now that OpenRISC platforms may be configured with different serial port
> hardware we don't want emergency print to try to print to non-existent
> hardware which will cause lockups.
>
> This patch contains several fixes to get emergency print working again:
>
> - Update symbol loading to not assume the location of symbols
> - Split the putc print operation out to its own function to allow
> for different future implementations.
> - Update _emergency_print_nr and _emergency_print to use the putc
> function.
> - Guard serial 8250 specific sequences by CONFIG_SERIAL_8250
> - Update string line feed from lf,cr to cr,lf.
>
> Signed-off-by: Stafford Horne <shorne@...il.com>
> ---
> arch/openrisc/kernel/head.S | 148 +++++++++++++++++++++---------------
> 1 file changed, 85 insertions(+), 63 deletions(-)
>
> diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S
> index 15f1b38dfe03..b1f3a65c271c 100644
> --- a/arch/openrisc/kernel/head.S
> +++ b/arch/openrisc/kernel/head.S
> @@ -297,19 +297,23 @@
> /* temporary store r3, r9 into r1, r10 */ ;\
> l.addi r1,r3,0x0 ;\
> l.addi r10,r9,0x0 ;\
> - /* the string referenced by r3 must be low enough */ ;\
> + LOAD_SYMBOL_2_GPR(r9,_string_unhandled_exception) ;\
> + tophys (r3,r9) ;\
> l.jal _emergency_print ;\
> - l.ori r3,r0,lo(_string_unhandled_exception) ;\
> + l.nop ;\
> l.mfspr r3,r0,SPR_NPC ;\
> l.jal _emergency_print_nr ;\
> - l.andi r3,r3,0x1f00 ;\
> - /* the string referenced by r3 must be low enough */ ;\
> + l.andi r3,r3,0x1f00 ;\
> + LOAD_SYMBOL_2_GPR(r9,_string_epc_prefix) ;\
> + tophys (r3,r9) ;\
> l.jal _emergency_print ;\
> - l.ori r3,r0,lo(_string_epc_prefix) ;\
> + l.nop ;\
> l.jal _emergency_print_nr ;\
> - l.mfspr r3,r0,SPR_EPCR_BASE ;\
> + l.mfspr r3,r0,SPR_EPCR_BASE ;\
> + LOAD_SYMBOL_2_GPR(r9,_string_nl) ;\
> + tophys (r3,r9) ;\
> l.jal _emergency_print ;\
> - l.ori r3,r0,lo(_string_nl) ;\
> + l.nop ;\
> /* end of printing */ ;\
> l.addi r3,r1,0x0 ;\
> l.addi r9,r10,0x0 ;\
> @@ -1530,65 +1534,99 @@ trampoline_out:
> l.jr r9
> l.nop
>
> -
> /*
> - * DSCR: prints a string referenced by r3.
> + * DESC: Prints ASCII character stored in r7
> *
> - * PRMS: r3 - address of the first character of null
> - * terminated string to be printed
> + * PRMS: r7 - a 32-bit value with an ASCII character in the first byte
> + * position.
> *
> - * PREQ: UART at UART_BASE_ADD has to be initialized
> + * PREQ: The UART at UART_BASE_ADD has to be initialized
> *
> - * POST: caller should be aware that r3, r9 are changed
> + * POST: internally used but restores:
> + * r4 - to store UART_BASE_ADD
> + * r5 - for loading OFF_TXFULL / THRE,TEMT
> + * r6 - for storing bitmask (SERIAL_8250)
> */
> -ENTRY(_emergency_print)
> +ENTRY(_emergency_putc)
> EMERGENCY_PRINT_STORE_GPR4
> EMERGENCY_PRINT_STORE_GPR5
> EMERGENCY_PRINT_STORE_GPR6
> - EMERGENCY_PRINT_STORE_GPR7
> -2:
> - l.lbz r7,0(r3)
> - l.sfeq r7,r0
> - l.bf 9f
> - l.nop
>
> -// putc:
> l.movhi r4,hi(UART_BASE_ADD)
> + l.ori r4,r4,lo(UART_BASE_ADD)
>
> +#elif defined(CONFIG_SERIAL_8250)
This needs to use #if in this patch (and #elif in the next patch).
Regards,
Samuel
> + /* Check UART LSR THRE (hold) bit */
> l.addi r6,r0,0x20
> 1: l.lbz r5,5(r4)
> l.andi r5,r5,0x20
> l.sfeq r5,r6
> l.bnf 1b
> - l.nop
> + l.nop
>
> + /* Write character */
> l.sb 0(r4),r7
>
> + /* Check UART LSR THRE|TEMT (hold, empty) bits */
> l.addi r6,r0,0x60
> 1: l.lbz r5,5(r4)
> l.andi r5,r5,0x60
> l.sfeq r5,r6
> l.bnf 1b
> - l.nop
> + l.nop
> +#endif
> + EMERGENCY_PRINT_LOAD_GPR6
> + EMERGENCY_PRINT_LOAD_GPR5
> + EMERGENCY_PRINT_LOAD_GPR4
> + l.jr r9
> + l.nop
> +
> +/*
> + * DSCR: prints a string referenced by r3.
> + *
> + * PRMS: r3 - address of the first character of null
> + * terminated string to be printed
> + *
> + * PREQ: UART at UART_BASE_ADD has to be initialized
> + *
> + * POST: caller should be aware that r3, r9 are changed
> + */
> +ENTRY(_emergency_print)
> + EMERGENCY_PRINT_STORE_GPR7
> + EMERGENCY_PRINT_STORE_GPR9
> +
> + /* Load character to r7, check for null terminator */
> +2: l.lbz r7,0(r3)
> + l.sfeqi r7,0x0
> + l.bf 9f
> + l.nop
> +
> + l.jal _emergency_putc
> + l.nop
>
> /* next character */
> l.j 2b
> - l.addi r3,r3,0x1
> + l.addi r3,r3,0x1
>
> 9:
> + EMERGENCY_PRINT_LOAD_GPR9
> EMERGENCY_PRINT_LOAD_GPR7
> - EMERGENCY_PRINT_LOAD_GPR6
> - EMERGENCY_PRINT_LOAD_GPR5
> - EMERGENCY_PRINT_LOAD_GPR4
> l.jr r9
> - l.nop
> + l.nop
>
> +/*
> + * DSCR: prints a number in r3 in hex.
> + *
> + * PRMS: r3 - a 32-bit unsigned integer
> + *
> + * PREQ: UART at UART_BASE_ADD has to be initialized
> + *
> + * POST: caller should be aware that r3, r9 are changed
> + */
> ENTRY(_emergency_print_nr)
> - EMERGENCY_PRINT_STORE_GPR4
> - EMERGENCY_PRINT_STORE_GPR5
> - EMERGENCY_PRINT_STORE_GPR6
> EMERGENCY_PRINT_STORE_GPR7
> EMERGENCY_PRINT_STORE_GPR8
> + EMERGENCY_PRINT_STORE_GPR9
>
> l.addi r8,r0,32 // shift register
>
> @@ -1600,58 +1638,39 @@ ENTRY(_emergency_print_nr)
> /* don't skip the last zero if number == 0x0 */
> l.sfeqi r8,0x4
> l.bf 2f
> - l.nop
> + l.nop
>
> l.sfeq r7,r0
> l.bf 1b
> - l.nop
> + l.nop
>
> 2:
> l.srl r7,r3,r8
>
> l.andi r7,r7,0xf
> l.sflts r8,r0
> - l.bf 9f
> + l.bf 9f
>
> + /* Numbers greater than 9 translate to a-f */
> l.sfgtui r7,0x9
> l.bnf 8f
> - l.nop
> + l.nop
> l.addi r7,r7,0x27
>
> -8:
> - l.addi r7,r7,0x30
> -// putc:
> - l.movhi r4,hi(UART_BASE_ADD)
> -
> - l.addi r6,r0,0x20
> -1: l.lbz r5,5(r4)
> - l.andi r5,r5,0x20
> - l.sfeq r5,r6
> - l.bnf 1b
> - l.nop
> -
> - l.sb 0(r4),r7
> -
> - l.addi r6,r0,0x60
> -1: l.lbz r5,5(r4)
> - l.andi r5,r5,0x60
> - l.sfeq r5,r6
> - l.bnf 1b
> - l.nop
> + /* Convert to ascii and output character */
> +8: l.jal _emergency_putc
> + l.addi r7,r7,0x30
>
> /* next character */
> l.j 2b
> l.addi r8,r8,-0x4
>
> 9:
> + EMERGENCY_PRINT_LOAD_GPR9
> EMERGENCY_PRINT_LOAD_GPR8
> EMERGENCY_PRINT_LOAD_GPR7
> - EMERGENCY_PRINT_LOAD_GPR6
> - EMERGENCY_PRINT_LOAD_GPR5
> - EMERGENCY_PRINT_LOAD_GPR4
> l.jr r9
> - l.nop
> -
> + l.nop
>
> /*
> * This should be used for debugging only.
> @@ -1676,7 +1695,9 @@ ENTRY(_emergency_print_nr)
>
> ENTRY(_early_uart_init)
> l.movhi r3,hi(UART_BASE_ADD)
> + l.ori r3,r3,lo(UART_BASE_ADD)
>
> +#if defined(CONFIG_SERIAL_8250)
> l.addi r4,r0,0x7
> l.sb 0x2(r3),r4
>
> @@ -1694,9 +1715,10 @@ ENTRY(_early_uart_init)
> l.addi r4,r0,((UART_DIVISOR) & 0x000000ff)
> l.sb UART_DLL(r3),r4
> l.sb 0x3(r3),r5
> +#endif
>
> l.jr r9
> - l.nop
> + l.nop
>
> .align 0x1000
> .global _secondary_evbar
> @@ -1711,13 +1733,13 @@ _secondary_evbar:
>
> .section .rodata
> _string_unhandled_exception:
> - .string "\n\rRunarunaround: Unhandled exception 0x\0"
> + .string "\r\nRunarunaround: Unhandled exception 0x\0"
>
> _string_epc_prefix:
> .string ": EPC=0x\0"
>
> _string_nl:
> - .string "\n\r\0"
> + .string "\r\n\0"
>
>
> /* ========================================[ page aligned structures ]=== */
>
Powered by blists - more mailing lists