linux-kernel - [PATCH v8 0/3] arm64: mvebu: Support for Marvell 98DX2530 (and variants)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220515233047.531979-1-chris.packham@alliedtelesis.co.nz>
Date:   Mon, 16 May 2022 11:30:44 +1200
From:   Chris Packham <chris.packham@...iedtelesis.co.nz>
To:     robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        catalin.marinas@....com, will@...nel.org, andrew@...n.ch,
        gregory.clement@...tlin.com, sebastian.hesselbarth@...il.com,
        kostap@...vell.com, robert.marko@...tura.hr,
        vadym.kochan@...ision.eu
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        Chris Packham <chris.packham@...iedtelesis.co.nz>
Subject: [PATCH v8 0/3] arm64: mvebu: Support for Marvell 98DX2530 (and variants)

This series adds support for the Marvell 98DX2530 SoC which is the Control and
Management CPU integrated into the AlleyCat5/AlleyCat5X series of Marvell
switches.

The CPU core is an ARM Cortex-A55 with neon, simd and crypto extensions.

This is fairly similar to the Armada-3700 SoC so most of the required
peripherals are already supported. This series adds a devicetree and pinctrl
driver for the SoC and the RD-AC5X-32G16HVG6HLG reference board.

The pinctrl changes from v4 have been picked up and are in linux-next so I
haven't included them in this round. That leaves just the dts files and a minor
Kconfig update for arm64.

Chris Packham (3):
  dt-bindings: marvell: Document the AC5/AC5X compatibles
  arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board
  arm64: marvell: enable the 98DX2530 pinctrl driver

 .../bindings/arm/marvell/armada-98dx25xx.yaml |  32 ++
 arch/arm64/Kconfig.platforms                  |   2 +
 arch/arm64/boot/dts/marvell/Makefile          |   1 +
 .../boot/dts/marvell/armada-98dx25xx.dtsi     | 297 ++++++++++++++++++
 .../boot/dts/marvell/armada-98dx35xx-rd.dts   | 101 ++++++
 .../boot/dts/marvell/armada-98dx35xx.dtsi     |  13 +
 6 files changed, 446 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/marvell/armada-98dx25xx.yaml
 create mode 100644 arch/arm64/boot/dts/marvell/armada-98dx25xx.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/armada-98dx35xx-rd.dts
 create mode 100644 arch/arm64/boot/dts/marvell/armada-98dx35xx.dtsi

-- 
2.36.1