| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHpyw9epvs9E=DxHRD5oV3wzpiq7spogp+TZcuyNhD4Nk3exZg@mail.gmail.com>
Date: Mon, 16 May 2022 10:35:50 +0800
From: Medad Young <medadyoung@...il.com>
To: Paul Menzel <pmenzel@...gen.mpg.de>
Cc: rric@...nel.org, James Morse <james.morse@....com>,
tony.luck@...el.com, Mauro Carvalho Chehab <mchehab@...nel.org>,
Borislav Petkov <bp@...en8.de>,
Rob Herring <robh+dt@...nel.org>,
Benjamin Fair <benjaminfair@...gle.com>,
Nancy Yuen <yuenn@...gle.com>,
Patrick Venture <venture@...gle.com>, KWLIU@...oton.com,
YSCHU@...oton.com, JJLIU0@...oton.com, KFTING <KFTING@...oton.com>,
Avi Fishman <avifishman70@...il.com>,
Tomer Maimon <tmaimon77@...il.com>,
Tali Perry <tali.perry1@...il.com>, ctcchien@...oton.com,
devicetree <devicetree@...r.kernel.org>,
OpenBMC Maillist <openbmc@...ts.ozlabs.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-edac <linux-edac@...r.kernel.org>
Subject: Re: [PATCH v9 3/3] EDAC: nuvoton: Add NPCM memory controller driver
Dear Paul,
thanks for your comments.
Paul Menzel <pmenzel@...gen.mpg.de> 於 2022年5月10日 週二 下午3:49寫道：
>
> Dear Medad,
>
>
> Am 10.05.22 um 05:10 schrieb Medad CChien:
> > Add memory controller support for Nuvoton NPCM SoC.
>
> It’d be great if you added the datasheet name, revision and section used
> to implement this.
>
OK, I will add those information.
> > Note:
> > you can force an ecc event by writing a string to edac sysfs node
> > and remember to define CONFIG_EDAC_DEBUG to enable this feature
> > example: force a correctable event on checkcode bit 0
> > echo "CE checkcode 0" > /sys/devices/system/edac/mc/mc0/forced_ecc_error
> >
> > Fix the following warnings and error:
> > error:
> > error: macro "edac_printk" requires 4 arguments, but only 2 given in
> > driver/edac/npcm_edac.c
> > edac_printk(KERN_INFO, "bit_no for checkcode must be 0~7\n");
> >
> > warnings:
> > performing pointer arithmetic on a null pointer has undefined behavior.
> > logical not is only applied to the left hand side of this bitwise
> > operator.
> > mixing declarations and code is a C99 extension.
> >
> > Reported-by: kernel test robot <lkp@...el.com>
>
> I find this line confusing as the kernel test robot did not report that
> the memory controller driver is missing.
>
Sorry, I did not get your point.
but I add these due to kernel test robot reported some errors and warnings.
> > Signed-off-by: Medad CChien <ctcchien@...oton.com>
> > ---
> > drivers/edac/Kconfig | 10 +
> > drivers/edac/Makefile | 1 +
> > drivers/edac/npcm_edac.c | 680 +++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 691 insertions(+)
> > create mode 100644 drivers/edac/npcm_edac.c
> >
> > diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> > index 58ab63642e72..9c83202cbf65 100644
> > --- a/drivers/edac/Kconfig
> > +++ b/drivers/edac/Kconfig
> > @@ -539,4 +539,14 @@ config EDAC_DMC520
> > Support for error detection and correction on the
> > SoCs with ARM DMC-520 DRAM controller.
> >
> > +config EDAC_NPCM
> > + tristate "Nuvoton NPCM DDR Memory Controller"
> > + depends on (ARCH_NPCM || COMPILE_TEST)
> > + help
> > + Support for error detection and correction on the Nuvoton NPCM DDR
> > + memory controller.
>
> Maybe add the information from the devicetree documentation:
>
> The Nuvoton BMC SoC supports DDR4 memory with and without ECC (error
> correction check).
>
> The memory controller supports single bit error correction, double bit
> error detection (in-line ECC in which a section (1/8th) of the memory
> device used to store data is used for ECC storage).
>
OK, I will add that information.
> > +
> > + First, ECC must be configured in the BootBlock header. Then, this driver
> > + will expose error counters via the EDAC kernel framework.
> > +
> > endif # EDAC
> > diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
> > index 2d1641a27a28..db3c59d3ad84 100644
> > --- a/drivers/edac/Makefile
> > +++ b/drivers/edac/Makefile
> > @@ -84,3 +84,4 @@ obj-$(CONFIG_EDAC_QCOM) += qcom_edac.o
> > obj-$(CONFIG_EDAC_ASPEED) += aspeed_edac.o
> > obj-$(CONFIG_EDAC_BLUEFIELD) += bluefield_edac.o
> > obj-$(CONFIG_EDAC_DMC520) += dmc520_edac.o
> > +obj-$(CONFIG_EDAC_NPCM) += npcm_edac.o
> > diff --git a/drivers/edac/npcm_edac.c b/drivers/edac/npcm_edac.c
> > new file mode 100644
> > index 000000000000..5552dab242b1
> > --- /dev/null
> > +++ b/drivers/edac/npcm_edac.c
> > @@ -0,0 +1,680 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +// Copyright (c) 2022 Nuvoton Technology corporation.
>
> No dot/period is needed at the end, as corporation is not abbreviated.
> Maybe also capitalize Corporation as done on the Web site.
OK
>
> > +
> > +#include <linux/delay.h>
> > +#include <linux/of_device.h>
> > +
> > +#include "edac_module.h"
> > +
> > +#define NPCM_EDAC_MOD_NAME "npcm-edac"
> > +#define FORCED_ECC_ERR_EVENT_SUPPORT BIT(1)
> > +#define EDAC_MSG_SIZE 256
> > +/* Granularity of reported error in bytes */
> > +#define NPCM_EDAC_ERR_GRAIN 1
> > +
> > +#define MEM_TYPE_DDR4 0xA
> > +
> > +#define NPCM7XX_CHIP 0x700
> > +#define NPCM8XX_CHIP 0x800
> > +
> > +/* Control register width definitions */
> > +#define WDTH_16 (2)
> > +#define WDTH_32 (1)
> > +#define WDTH_64 (0)
> > +#define CTL_MEM_MAX_WIDTH_MASK GENMASK(4, 0)
> > +#define CTL_REG_WIDTH_SHIFT (32)
> > +#define XOR_CHECK_BIT_SPLIT_WIDTH (16)
> > +#define CTL_CONTROLLER_BUSY_FLAG BIT(0)
> > +#define NPCM_ECC_CTL_FORCE_WC BIT(8)
> > +#define NPCM_ECC_CTL_AUTO_WRITEBACK_EN BIT(24)
> > +#define NPCM_ECC_CTL_XOR_BITS_MASK GENMASK(23, 16)
> > +#define NPCM_ECC_CTL_MTYPE_MASK GENMASK(11, 8)
> > +#define NPCM_ECC_CTL_GLOBAL_INT_DISABLE BIT(31)
> > +
> > +/* Syndrome values */
> > +#define ECC_DOUBLE_MULTI_ERR_SYND 0x03
> > +
> > +static char data_synd[] = {
> > + 0xf4, 0xf1, 0xec, 0xea, 0xe9, 0xe6, 0xe5, 0xe3,
> > + 0xdc, 0xda, 0xd9, 0xd6, 0xd5, 0xd3, 0xce, 0xcb,
> > + 0xb5, 0xb0, 0xad, 0xab, 0xa8, 0xa7, 0xa4, 0xa2,
> > + 0x9d, 0x9b, 0x98, 0x97, 0x94, 0x92, 0x8f, 0x8a,
> > + 0x75, 0x70, 0x6d, 0x6b, 0x68, 0x67, 0x64, 0x62,
> > + 0x5e, 0x5b, 0x58, 0x57, 0x54, 0x52, 0x4f, 0x4a,
> > + 0x34, 0x31, 0x2c, 0x2a, 0x29, 0x26, 0x25, 0x23,
> > + 0x1c, 0x1a, 0x19, 0x16, 0x15, 0x13, 0x0e, 0x0b
> > + };
>
> This does not look correctly indented. At least the } should be at the
> beginning. The values can just be indented by one tab I believe. (At
> least that is what `indent --linux-style` does (GNU indent 2.2.12).
>
OK
> > +
> > +static char check_synd[] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80};
>
> At least `indent --linux-style` add a space after { and before }.
>
OK
> > +
> > +struct npcm_edac_platform_data {
> > + /* force ECC event */
> > + u32 ip_features;
> > + u32 ddr_ctl_controller_busy_reg;
> > + u32 ecc_ctl_xor_check_bits_reg;
> > +
> > + u32 chip;
> > +
> > + /* DDR4 Controller Registers */
> > + u32 ddr_ctl_mem_type_reg;
> > + u32 ddr_ctl_mem_width_reg;
> > +
> > + u32 ecc_ctl_en_reg;
> > + u32 ecc_ctl_int_mask;
> > + u32 ecc_ctl_int_status;
> > + u32 ecc_ctl_int_ack;
> > + u32 ecc_ctl_int_mask_master;
> > + u32 ecc_ctl_int_mask_ecc;
> > +
> > + u32 ecc_sig_c_addr_l;
> > + u32 ecc_sig_c_addr_h;
> > + u32 ecc_sig_c_data_l;
> > + u32 ecc_sig_c_data_h;
> > + u32 ecc_sig_c_id;
> > + u32 ecc_sig_c_synd;
> > +
> > + u32 ecc_sig_u_addr_l;
> > + u32 ecc_sig_u_addr_h;
> > + u32 ecc_sig_u_data_l;
> > + u32 ecc_sig_u_data_h;
> > + u32 ecc_sig_u_id;
> > + u32 ecc_sig_u_synd;
> > +
> > + /* MASK */
> > + u32 ecc_ctl_ecc_enable_mask;
> > + u32 ecc_ctl_en_int_master_mask;
> > + u32 ecc_ctl_en_int_ecc_mask;
> > +
> > + /* ECC IRQ Macros */
> > + u32 ecc_int_ce_event;
> > + u32 ecc_int_second_ce_event;
> > + u32 ecc_int_ue_event;
> > + u32 ecc_int_second_ue_event;
> > + u32 ecc_int_ce_ue_mask;
> > + u32 ecc_ce_intr_mask;
> > + u32 ecc_ue_intr_mask;
> > +
> > + /* ECC Signature Macros */
> > + u32 ecc_sig_c_id_shift;
> > + u32 ecc_sig_c_synd_shift;
> > + u32 ecc_sig_c_addr_h_mask;
> > + u32 ecc_sig_c_id_mask;
> > + u32 ecc_sig_c_synd_mask;
> > +
> > + u32 ecc_sig_u_id_shift;
> > + u32 ecc_sig_u_synd_shift;
> > + u32 ecc_sig_u_addr_h_mask;
> > + u32 ecc_sig_u_id_mask;
> > + u32 ecc_sig_u_synd_mask;
> > +};
> > +
> > +struct priv_data {
> > + void __iomem *reg;
> > + u32 ce_cnt;
> > + u32 ue_cnt; > + char message[EDAC_MSG_SIZE];
> > + const struct npcm_edac_platform_data *npcm_chip;
> > +};
> > +
> > +
> > +static void init_mem_layout(struct mem_ctl_info *mci)
> > +{
> > + struct priv_data *priv = mci->pvt_info;
> > + const struct npcm_edac_platform_data *npcm_chip = priv->npcm_chip;
> > + struct csrow_info *csi;
> > + struct dimm_info *dimm;
> > + struct sysinfo info;
> > + enum mem_type mtype;
> > + u32 val, width;
> > + u32 size, row;
> > + u8 j;
>
> At least for loop variables, the default size integers should be used [1].
>
OK
> […]
>
>
> Kind regards,
>
> Paul
>
>
> [1]: https://notabs.org/coding/smallIntsBigPenalty.htm
Powered by blists - more mailing lists