| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220517192028.GA1453662-robh@kernel.org>
Date: Tue, 17 May 2022 14:20:28 -0500
From: Rob Herring <robh@...nel.org>
To: Serge Semin <Sergey.Semin@...kalelectronics.ru>
Cc: Damien Le Moal <damien.lemoal@...nsource.wdc.com>,
Hans de Goede <hdegoede@...hat.com>,
Jens Axboe <axboe@...nel.dk>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Serge Semin <fancer.lancer@...il.com>,
Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>,
linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v3 12/23] dt-bindings: ata: ahci: Add platform capability
properties
On Thu, May 12, 2022 at 02:17:59AM +0300, Serge Semin wrote:
> In case if the platform doesn't have BIOS or a comprehensive firmware
> installed then the HBA capability flags will be left uninitialized. As a
> good alternative we can define a set AHCI DT-node properties to describe
> all of HW-init capabilities flags. Luckily there aren't too many of them.
> SSS - Staggered Spin-up support and MPS - Mechanical Presence Switch
> support determine the corresponding feature availability for whole HBA by
> means of the "hba-sss" and "hba-smps" properties. Each port can have the
> "hba-{hpcp,mpsp,cpd,esp,fbscp}" defined indicatating that the port
> supports the next functionality: HPCP - HotPlug capable port, MPSP -
> Mechanical Presence Switch attached to a port, CPD - Cold Plug detection,
> ESP - External SATA Port (eSATA), FBSCP - FIS-based switching capable
> port.
>
> Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
>
> ---
>
> Alternatively we could define them as a bitfield, but having a set of
> boolean properties seemed a better idea since in that case we can
> implement a simple inter-dependency rules for them, which can't be done
> should we take the bitfields path.
I would just provide a CAP register override and be done with it.
The boolean fields only let you set a capability, but not unset one.
They would need to be tristate.
> ---
> .../devicetree/bindings/ata/ahci-common.yaml | 66 +++++++++++++++++++
> .../bindings/ata/ahci-platform.yaml | 11 ++++
> 2 files changed, 77 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml
> index a7d1a8353de3..a29edfbb25db 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-common.yaml
> +++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml
> @@ -75,6 +75,19 @@ properties:
> phy-names:
> const: sata-phy
>
> + hba-sss:
> + type: boolean
> + description:
> + Staggered Spin-up Support. Indicates whether the HBA supports the
> + staggered spin-up on its ports, for use in balancing power spikes.
> +
> + hba-smps:
> + type: boolean
> + description:
> + Mechanical Presence Switch Support. Indicates whether the HBA supports
> + mechanical presence switches on its ports for use in hot plug
> + operations.
> +
> ports-implemented:
> $ref: '/schemas/types.yaml#/definitions/uint32'
> description:
> @@ -97,6 +110,40 @@ patternProperties:
> minimum: 0
> maximum: 31
>
> + hba-hpcp:
> + type: boolean
> + description:
> + Hot Plug Capable Port. Indicates that this port’s signal and power
> + connectors are externally accessible via a joint signal and power
> + connector for blindmate device hot plug. It is mutually exclusive
> + with the ESP feature.
> +
> + hba-mpsp:
> + type: boolean
> + description:
> + Mechanical Presence Switch Attached to Port. Indicates whether
> + the platform an mechanical presence switch attached to this
> + port.
> +
> + hba-cpd:
> + type: boolean
> + description:
> + Cold Presence Detection. Indicates whether the platform supports
> + cold presence detection on this port.
> +
> + hba-esp:
> + type: boolean
> + description:
> + External SATA Port. Indicates that this port’s signal connector
> + is externally accessible on a signal only connector (e.g. eSATA
> + connector).
> +
> + hba-fbscp:
> + type: boolean
> + description:
> + FIS-based Switching Capable Port. Indicates whether this port
> + supports Port Multiplier FIS-based switching.
> +
> phys:
> description: Individual AHCI SATA port PHY
> maxItems: 1
> @@ -111,6 +158,25 @@ patternProperties:
> required:
> - reg
>
> + # eSATA can't be enabled together with the HotPlug capability
> + oneOf:
> + - required:
> + - hba-hpcp
> + - required:
> + - hba-esp
> + - not:
> + anyOf:
> + - required:
> + - hba-hpcp
> + - required:
> + - hba-esp
> +
> + # HotPlug capability must be enabled together with Cold Plug
> + # Detection and Mechanical Presence Switching.
> + dependencies:
> + hba-cpd: ["hba-hpcp"]
> + hba-mpsp: ["hba-hpcp"]
> +
> additionalProperties: true
>
> required:
> diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
> index 76075d3c8987..6cad7e86f3bb 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-platform.yaml
> +++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
> @@ -117,14 +117,25 @@ examples:
> #address-cells = <1>;
> #size-cells = <0>;
>
> + hba-smps;
> +
> sata0: sata-port@0 {
> reg = <0>;
> +
> + hba-fbscp;
> + hba-esp;
> +
> phys = <&sata_phy 0>;
> target-supply = <®_sata0>;
> };
>
> sata1: sata-port@1 {
> reg = <1>;
> +
> + hba-fbscp;
> + hba-hpcp;
> + hba-mpsp;
> +
> phys = <&sata_phy 1>;
> target-supply = <®_sata1>;
> };
> --
> 2.35.1
>
>
Powered by blists - more mailing lists