linux-kernel - Re: [PATCH v4 4/4] vfio/pci: Move the unused device into low power state with runtime PM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220517144256.15991375.alex.williamson@redhat.com>
Date:   Tue, 17 May 2022 14:42:56 -0600
From:   Alex Williamson <alex.williamson@...hat.com>
To:     Abhishek Sahu <abhsahu@...dia.com>
Cc:     Cornelia Huck <cohuck@...hat.com>,
        Yishai Hadas <yishaih@...dia.com>,
        Jason Gunthorpe <jgg@...dia.com>,
        Shameer Kolothum <shameerali.kolothum.thodi@...wei.com>,
        Kevin Tian <kevin.tian@...el.com>,
        "Rafael J . Wysocki" <rafael@...nel.org>,
        Max Gurtovoy <mgurtovoy@...dia.com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        <linux-kernel@...r.kernel.org>, <kvm@...r.kernel.org>,
        <linux-pm@...r.kernel.org>, <linux-pci@...r.kernel.org>
Subject: Re: [PATCH v4 4/4] vfio/pci: Move the unused device into low power
 state with runtime PM

On Tue, 17 May 2022 15:32:19 +0530
Abhishek Sahu <abhsahu@...dia.com> wrote:
> 5. Since the runtime PM framework will provide the same functionality,
>    so directly writing into PCI PM config register can be replaced with
>    the use of runtime PM routines. Also, the use of runtime PM can help
>    us in more power saving.
> 
>    In the systems which do not support D3cold,
> 
>    With the existing implementation:
> 
>    // PCI device
>    # cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
>    D3hot
>    // upstream bridge
>    # cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
>    D0
> 
>    With runtime PM:
> 
>    // PCI device
>    # cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
>    D3hot
>    // upstream bridge
>    # cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
>    D3hot

I'm not able to reproduce these results.  Output below abridged:

# lspci -t
-[0000:00]-+-00.0
           +-01.0-[01]--+-00.0
           |            \-00.1

# grep . /sys/bus/pci/devices/*/power_state
/sys/bus/pci/devices/0000:00:01.0/power_state:D0
/sys/bus/pci/devices/0000:01:00.0/power_state:D3hot
/sys/bus/pci/devices/0000:01:00.1/power_state:D3hot

# lspci -ks $DEV
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
	Kernel driver in use: pcieport
01:00.0 VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 750] (rev a2)
	Subsystem: eVga.com. Corp. Device 2753
	Kernel driver in use: vfio-pci
01:00.1 Audio device: NVIDIA Corporation GM107 High Definition Audio Controller [GeForce 940MX] (rev a1)
	Subsystem: eVga.com. Corp. Device 2753
	Kernel driver in use: vfio-pci
	Kernel modules: snd_hda_intel

Any debugging suggestions?  Thanks,

Alex