| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ad895690-b611-05d6-3950-601e99c7fa25@wanadoo.fr>
Date: Tue, 17 May 2022 23:03:41 +0200
From: Christophe JAILLET <christophe.jaillet@...adoo.fr>
To: Maxime Chevallier <maxime.chevallier@...tlin.com>,
davem@...emloft.net, Rob Herring <robh+dt@...nel.org>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, thomas.petazzoni@...tlin.com,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
linux-arm-kernel@...ts.infradead.org,
Vladimir Oltean <vladimir.oltean@....com>,
Luka Perkov <luka.perkov@...tura.hr>,
Robert Marko <robert.marko@...tura.hr>
Subject: Re: [PATCH net-next v2 1/5] net: ipqess: introduce the Qualcomm
IPQESS driver
Le 14/05/2022 à 17:06, Maxime Chevallier a écrit :
> The Qualcomm IPQESS controller is a simple 1G Ethernet controller found
> on the IPQ4019 chip. This controller has some specificities, in that the
> IPQ4019 platform that includes that controller also has an internal
> switch, based on the QCA8K IP.
>
> It is connected to that switch through an internal link, and doesn't
> expose directly any external interface, hence it only supports the
> PHY_INTERFACE_MODE_INTERNAL for now.
>
> It has 16 RX and TX queues, with a very basic RSS fanout configured at
> init time.
>
> Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
> ---
> V1->V2 :
> - Reworked the init sequence, following Andrew's comments
> - Added clock and reset support
> - Reworked the error paths
> - Added extra endianness wrappers to fix sparse warnings
>
> MAINTAINERS | 6 +
> drivers/net/ethernet/qualcomm/Kconfig | 11 +
> drivers/net/ethernet/qualcomm/Makefile | 2 +
> drivers/net/ethernet/qualcomm/ipqess/Makefile | 8 +
> drivers/net/ethernet/qualcomm/ipqess/ipqess.c | 1269 +++++++++++++++++
> drivers/net/ethernet/qualcomm/ipqess/ipqess.h | 518 +++++++
> .../ethernet/qualcomm/ipqess/ipqess_ethtool.c | 168 +++
> 7 files changed, 1982 insertions(+)
> create mode 100644 drivers/net/ethernet/qualcomm/ipqess/Makefile
> create mode 100644 drivers/net/ethernet/qualcomm/ipqess/ipqess.c
> create mode 100644 drivers/net/ethernet/qualcomm/ipqess/ipqess.h
> create mode 100644 drivers/net/ethernet/qualcomm/ipqess/ipqess_ethtool.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9b0480f1b153..29e6ec4f975a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16308,6 +16308,12 @@ L: netdev@...r.kernel.org
> S: Maintained
> F: drivers/net/ethernet/qualcomm/emac/
>
> +QUALCOMM IPQESS ETHERNET DRIVER
> +M: Maxime Chevallier <maxime.chevallier@...tlin.com>
> +L: netdev@...r.kernel.org
> +S: Maintained
> +F: drivers/net/ethernet/qualcomm/ipqess/
> +
> QUALCOMM ETHQOS ETHERNET DRIVER
> M: Vinod Koul <vkoul@...nel.org>
> L: netdev@...r.kernel.org
> diff --git a/drivers/net/ethernet/qualcomm/Kconfig b/drivers/net/ethernet/qualcomm/Kconfig
> index a4434eb38950..a723ddbea248 100644
> --- a/drivers/net/ethernet/qualcomm/Kconfig
> +++ b/drivers/net/ethernet/qualcomm/Kconfig
> @@ -60,6 +60,17 @@ config QCOM_EMAC
> low power, Receive-Side Scaling (RSS), and IEEE 1588-2008
> Precision Clock Synchronization Protocol.
>
> +config QCOM_IPQ4019_ESS_EDMA
> + tristate "Qualcomm Atheros IPQ4019 ESS EDMA support"
> + depends on OF
> + select PHYLINK
> + help
> + This driver supports the Qualcomm Atheros IPQ40xx built-in
> + ESS EDMA ethernet controller.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called ipqess.
> +
> source "drivers/net/ethernet/qualcomm/rmnet/Kconfig"
>
> endif # NET_VENDOR_QUALCOMM
> diff --git a/drivers/net/ethernet/qualcomm/Makefile b/drivers/net/ethernet/qualcomm/Makefile
> index 9250976dd884..db463c9ea1f9 100644
> --- a/drivers/net/ethernet/qualcomm/Makefile
> +++ b/drivers/net/ethernet/qualcomm/Makefile
> @@ -11,4 +11,6 @@ qcauart-objs := qca_uart.o
>
> obj-y += emac/
>
> +obj-$(CONFIG_QCOM_IPQ4019_ESS_EDMA) += ipqess/
> +
> obj-$(CONFIG_RMNET) += rmnet/
> diff --git a/drivers/net/ethernet/qualcomm/ipqess/Makefile b/drivers/net/ethernet/qualcomm/ipqess/Makefile
> new file mode 100644
> index 000000000000..4f2db7283ebf
> --- /dev/null
> +++ b/drivers/net/ethernet/qualcomm/ipqess/Makefile
> @@ -0,0 +1,8 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Makefile for the IPQ ESS driver
> +#
> +
> +obj-$(CONFIG_QCOM_IPQ4019_ESS_EDMA) += ipq_ess.o
> +
> +ipq_ess-objs := ipqess.o ipqess_ethtool.o
> diff --git a/drivers/net/ethernet/qualcomm/ipqess/ipqess.c b/drivers/net/ethernet/qualcomm/ipqess/ipqess.c
> new file mode 100644
> index 000000000000..b11f11f23c11
> --- /dev/null
> +++ b/drivers/net/ethernet/qualcomm/ipqess/ipqess.c
> @@ -0,0 +1,1269 @@
> +// SPDX-License-Identifier: GPL-2.0 OR ISC
> +/* Copyright (c) 2014 - 2017, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2017 - 2018, John Crispin <john@...ozen.org>
> + * Copyright (c) 2018 - 2019, Christian Lamparter <chunkeey@...il.com>
> + * Copyright (c) 2020 - 2021, Gabor Juhos <j4g8y7@...il.com>
> + * Copyright (c) 2021 - 2022, Maxime Chevallier <maxime.chevallier@...tlin.com>
> + *
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/if_vlan.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_mdio.h>
> +#include <linux/of_net.h>
> +#include <linux/phylink.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/skbuff.h>
> +#include <linux/vmalloc.h>
> +#include <net/checksum.h>
> +#include <net/ip6_checksum.h>
> +
> +#include "ipqess.h"
> +
> +#define IPQESS_RRD_SIZE 16
> +#define IPQESS_NEXT_IDX(X, Y) (((X) + 1) & ((Y) - 1))
> +#define IPQESS_TX_DMA_BUF_LEN 0x3fff
> +
> +static void ipqess_w32(struct ipqess *ess, u32 reg, u32 val)
> +{
> + writel(val, ess->hw_addr + reg);
> +}
> +
> +static u32 ipqess_r32(struct ipqess *ess, u16 reg)
> +{
> + return readl(ess->hw_addr + reg);
> +}
> +
> +static void ipqess_m32(struct ipqess *ess, u32 mask, u32 val, u16 reg)
> +{
> + u32 _val = ipqess_r32(ess, reg);
> +
> + _val &= ~mask;
> + _val |= val;
> +
> + ipqess_w32(ess, reg, _val);
> +}
> +
> +void ipqess_update_hw_stats(struct ipqess *ess)
> +{
> + u32 *p;
> + u32 stat;
> + int i;
> +
> + lockdep_assert_held(&ess->stats_lock);
> +
> + p = (u32 *)&ess->ipqess_stats;
> + for (i = 0; i < IPQESS_MAX_TX_QUEUE; i++) {
> + stat = ipqess_r32(ess, IPQESS_REG_TX_STAT_PKT_Q(i));
> + *p += stat;
> + p++;
> + }
> +
> + for (i = 0; i < IPQESS_MAX_TX_QUEUE; i++) {
> + stat = ipqess_r32(ess, IPQESS_REG_TX_STAT_BYTE_Q(i));
> + *p += stat;
> + p++;
> + }
> +
> + for (i = 0; i < IPQESS_MAX_RX_QUEUE; i++) {
> + stat = ipqess_r32(ess, IPQESS_REG_RX_STAT_PKT_Q(i));
> + *p += stat;
> + p++;
> + }
> +
> + for (i = 0; i < IPQESS_MAX_RX_QUEUE; i++) {
> + stat = ipqess_r32(ess, IPQESS_REG_RX_STAT_BYTE_Q(i));
> + *p += stat;
> + p++;
> + }
> +}
> +
> +static int ipqess_tx_ring_alloc(struct ipqess *ess)
> +{
> + struct device *dev = &ess->pdev->dev;
> + int i;
> +
> + for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) {
> + struct ipqess_tx_ring *tx_ring = &ess->tx_ring[i];
> + size_t size;
> + u32 idx;
> +
> + tx_ring->ess = ess;
> + tx_ring->ring_id = i;
> + tx_ring->idx = i * 4;
> + tx_ring->count = IPQESS_TX_RING_SIZE;
> + tx_ring->nq = netdev_get_tx_queue(ess->netdev, i);
> +
> + size = sizeof(struct ipqess_buf) * IPQESS_TX_RING_SIZE;
> + tx_ring->buf = devm_kzalloc(dev, size, GFP_KERNEL);
> + if (!tx_ring->buf) {
> + netdev_err(ess->netdev, "buffer alloc of tx ring failed");
> + return -ENOMEM;
> + }
> +
> + size = sizeof(struct ipqess_tx_desc) * IPQESS_TX_RING_SIZE;
> + tx_ring->hw_desc = dmam_alloc_coherent(dev, size, &tx_ring->dma,
> + GFP_KERNEL | __GFP_ZERO);
Hi,
Nitpicking: I think that __GFP_ZERO is useless (and harmless) because
dma_alloc_coherent() always zeroes the memory that is allocated.
CJ
Powered by blists - more mailing lists