linux-kernel - Re: [PATCH v2 0/1] FUSE: Allow non-extending parallel direct writes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CACUYsyE-83unRZvFLC+FQ1260+u3A2i5=JtuRC5cj44yvpYLMQ@mail.gmail.com>
Date:   Tue, 17 May 2022 13:10:05 +0530
From:   Dharmendra Hans <dharamhans87@...il.com>
To:     Miklos Szeredi <miklos@...redi.hu>, Vivek Goyal <vgoyal@...hat.com>
Cc:     linux-fsdevel@...r.kernel.org,
        fuse-devel <fuse-devel@...ts.sourceforge.net>,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 0/1] FUSE: Allow non-extending parallel direct writes

On Mon, May 9, 2022 at 4:29 PM Dharmendra Singh <dharamhans87@...il.com> wrote:
>
> It is observed that currently in Fuse, for direct writes, we hold
> inode lock for the full duration of the request. As a result,
> only one direct write request can proceed on the same file. This,
> I think is due to various reasons such as serialization needed by
> USER space fuse implementations/file size issues/write failures.
>
> This patch allows parallel writes to proceed on the same file by
> by holding shared lock on the non-extending writes and exlusive
> lock on extending writes.
>
> For measuring performance, I carried out test on these
> changes over example/passthrough.c (part of libfuse) by setting
> direct-io and parallel_direct_writes flags on the file.
>
> Note that we disabled write to underlying file system from passthrough
> as we wanted to check gain for Fuse only. Fio was used to test
> the impact of these changes on File-per-job and Single shared File.
> CPU binding was performed on passthrough process only.
>
> Job file for SSF:
> [global]
> directory=/tmp/dest
> filename=ssf
> size=100g
> blocksize=1m
> ioengine=sync
> group_reporting=1
> fallocate=none
> runtime=60
> stonewall
>
> [write]
> rw=randwrite:256
> rw_sequencer=sequential
> fsync_on_close=1
>
>
> Job file for file-per-job:
> [sequential-write]
> rw=write
> size=100G
> directory=/tmp/dest/
> group_reporting
> name=sequential-write-direct
> bs=1M
> runtime=60
>
>
> Results:
>
> unpatched=================
>
> File  per job
>
>
> Fri May  6 09:36:52 EDT 2022
> numjobs: 1  WRITE: bw=3441MiB/s (3608MB/s), 3441MiB/s-3441MiB/s (3608MB/s-3608MB/s), io=100GiB (107GB), run=29762-29762msec
> numjobs: 2  WRITE: bw=8174MiB/s (8571MB/s), 8174MiB/s-8174MiB/s (8571MB/s-8571MB/s), io=200GiB (215GB), run=25054-25054msec
> numjobs: 4  WRITE: bw=14.9GiB/s (15.0GB/s), 14.9GiB/s-14.9GiB/s (15.0GB/s-15.0GB/s), io=400GiB (429GB), run=26900-26900msec
> numjobs: 8  WRITE: bw=23.4GiB/s (25.2GB/s), 23.4GiB/s-23.4GiB/s (25.2GB/s-25.2GB/s), io=800GiB (859GB), run=34115-34115msec
> numjobs: 16  WRITE: bw=24.5GiB/s (26.3GB/s), 24.5GiB/s-24.5GiB/s (26.3GB/s-26.3GB/s), io=1469GiB (1577GB), run=60001-60001msec
> numjobs: 32  WRITE: bw=20.5GiB/s (21.0GB/s), 20.5GiB/s-20.5GiB/s (21.0GB/s-21.0GB/s), io=1229GiB (1320GB), run=60003-60003msec
>
>
> SSF
>
> Fri May  6 09:46:38 EDT 2022
> numjobs: 1  WRITE: bw=3624MiB/s (3800MB/s), 3624MiB/s-3624MiB/s (3800MB/s-3800MB/s), io=100GiB (107GB), run=28258-28258msec
> numjobs: 2  WRITE: bw=5801MiB/s (6083MB/s), 5801MiB/s-5801MiB/s (6083MB/s-6083MB/s), io=200GiB (215GB), run=35302-35302msec
> numjobs: 4  WRITE: bw=4794MiB/s (5027MB/s), 4794MiB/s-4794MiB/s (5027MB/s-5027MB/s), io=281GiB (302GB), run=60001-60001msec
> numjobs: 8  WRITE: bw=3946MiB/s (4137MB/s), 3946MiB/s-3946MiB/s (4137MB/s-4137MB/s), io=231GiB (248GB), run=60003-60003msec
> numjobs: 16  WRITE: bw=4040MiB/s (4236MB/s), 4040MiB/s-4040MiB/s (4236MB/s-4236MB/s), io=237GiB (254GB), run=60006-60006msec
> numjobs: 32  WRITE: bw=2822MiB/s (2959MB/s), 2822MiB/s-2822MiB/s (2959MB/s-2959MB/s), io=165GiB (178GB), run=60013-60013msec
>
>
> Patched=====
>
> File per job
>
> Fri May  6 10:05:46 EDT 2022
> numjobs: 1  WRITE: bw=3193MiB/s (3348MB/s), 3193MiB/s-3193MiB/s (3348MB/s-3348MB/s), io=100GiB (107GB), run=32068-32068msec
> numjobs: 2  WRITE: bw=9084MiB/s (9525MB/s), 9084MiB/s-9084MiB/s (9525MB/s-9525MB/s), io=200GiB (215GB), run=22545-22545msec
> numjobs: 4  WRITE: bw=14.8GiB/s (15.9GB/s), 14.8GiB/s-14.8GiB/s (15.9GB/s-15.9GB/s), io=400GiB (429GB), run=26986-26986msec
> numjobs: 8  WRITE: bw=24.5GiB/s (26.3GB/s), 24.5GiB/s-24.5GiB/s (26.3GB/s-26.3GB/s), io=800GiB (859GB), run=32624-32624msec
> numjobs: 16  WRITE: bw=24.2GiB/s (25.0GB/s), 24.2GiB/s-24.2GiB/s (25.0GB/s-25.0GB/s), io=1451GiB (1558GB), run=60001-60001msec
> numjobs: 32  WRITE: bw=19.3GiB/s (20.8GB/s), 19.3GiB/s-19.3GiB/s (20.8GB/s-20.8GB/s), io=1160GiB (1245GB), run=60002-60002msec
>
>
> SSF
>
> Fri May  6 09:58:33 EDT 2022
> numjobs: 1  WRITE: bw=3137MiB/s (3289MB/s), 3137MiB/s-3137MiB/s (3289MB/s-3289MB/s), io=100GiB (107GB), run=32646-32646msec
> numjobs: 2  WRITE: bw=7736MiB/s (8111MB/s), 7736MiB/s-7736MiB/s (8111MB/s-8111MB/s), io=200GiB (215GB), run=26475-26475msec
> numjobs: 4  WRITE: bw=14.4GiB/s (15.4GB/s), 14.4GiB/s-14.4GiB/s (15.4GB/s-15.4GB/s), io=400GiB (429GB), run=27869-27869msec
> numjobs: 8  WRITE: bw=22.6GiB/s (24.3GB/s), 22.6GiB/s-22.6GiB/s (24.3GB/s-24.3GB/s), io=800GiB (859GB), run=35340-35340msec
> numjobs: 16  WRITE: bw=25.6GiB/s (27.5GB/s), 25.6GiB/s-25.6GiB/s (27.5GB/s-27.5GB/s), io=1535GiB (1648GB), run=60001-60001msec
> numjobs: 32  WRITE: bw=20.2GiB/s (21.7GB/s), 20.2GiB/s-20.2GiB/s (21.7GB/s-21.7GB/s), io=1211GiB (1300GB), run=60003-60003msec
>
>
>
> SSF gain in percentage:-
> For 1 fio thread: +0%
> For 2 fio threads: +0%
> For 4 fio threads: +42%
> For 8 fio threads: +246.8%
> For 16 fio threads: +549%
> For 32 fio threads: +630.33%

A gentle reminder to look into the suggested changes.


Thanks,
Dharmendra