[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7a10b1d7fc294093f26555a8b5a8748a3c0e1c9f.camel@mediatek.com>
Date: Wed, 18 May 2022 09:55:28 +0800
From: Jianjun Wang <jianjun.wang@...iatek.com>
To: Ryder Lee <ryder.lee@...iatek.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Bjorn Helgaas <bhelgaas@...gle.com>
CC: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
"Rob Herring" <robh@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Matthias Brugger <matthias.bgg@...il.com>,
<linux-pci@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <jieyy.yang@...iatek.com>,
<chuanjia.liu@...iatek.com>, <qizhong.cheng@...iatek.com>,
<jian.yang@...iatek.com>
Subject: Re: [PATCH v2] PCI: mediatek-gen3: Print LTSSM state when PCIe link
down
Hi Maintainers,
Gentle ping for this patch, if there is anything I can do to get this
patch merged, please let me know.
Thanks.
On Fri, 2022-04-22 at 14:33 +0800, Jianjun Wang wrote:
> Hi Maintainers,
>
> Just gentle ping for this patch, if there is anything I can do to get
> this patch merged, please let me know.
>
> Thanks.
>
> On Tue, 2022-03-29 at 11:07 +0800, Jianjun Wang wrote:
> > Print current LTSSM state when PCIe link down instead of the
> > register
> > value, make it easier to get the link status.
> >
> > Signed-off-by: Jianjun Wang <jianjun.wang@...iatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@...labora.com>
> > ---
> > Changes in v2:
> > Print both of the register value and the LTSSM state.
> > ---
> > drivers/pci/controller/pcie-mediatek-gen3.c | 41
> > ++++++++++++++++++++-
> > 1 file changed, 40 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c
> > b/drivers/pci/controller/pcie-mediatek-gen3.c
> > index 6745076a02b9..c24e03c198b7 100644
> > --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> > @@ -153,6 +153,37 @@ struct mtk_gen3_pcie {
> > DECLARE_BITMAP(msi_irq_in_use, PCIE_MSI_IRQS_NUM);
> > };
> >
> > +/* LTSSM state in PCIE_LTSSM_STATUS_REG bit[28:24] */
> > +static const char *const ltssm_str[] = {
> > + "detect.quiet", /* 0x00 */
> > + "detect.active", /* 0x01 */
> > + "polling.active", /* 0x02 */
> > + "polling.compliance", /* 0x03 */
> > + "polling.configuration", /* 0x04 */
> > + "config.linkwidthstart", /* 0x05 */
> > + "config.linkwidthaccept", /* 0x06 */
> > + "config.lanenumwait", /* 0x07 */
> > + "config.lanenumaccept", /* 0x08 */
> > + "config.complete", /* 0x09 */
> > + "config.idle", /* 0x0A */
> > + "recovery.receiverlock", /* 0x0B */
> > + "recovery.equalization", /* 0x0C */
> > + "recovery.speed", /* 0x0D */
> > + "recovery.receiverconfig", /* 0x0E */
> > + "recovery.idle", /* 0x0F */
> > + "L0", /* 0x10 */
> > + "L0s", /* 0x11 */
> > + "L1.entry", /* 0x12 */
> > + "L1.idle", /* 0x13 */
> > + "L2.idle", /* 0x14 */
> > + "L2.transmitwake", /* 0x15 */
> > + "disable", /* 0x16 */
> > + "loopback.entry", /* 0x17 */
> > + "loopback.active", /* 0x18 */
> > + "loopback.exit", /* 0x19 */
> > + "hotreset", /* 0x1A */
> > +};
> > +
> > /**
> > * mtk_pcie_config_tlp_header() - Configure a configuration TLP
> > header
> > * @bus: PCI bus to query
> > @@ -327,8 +358,16 @@ static int mtk_pcie_startup_port(struct
> > mtk_gen3_pcie *pcie)
> > !!(val & PCIE_PORT_LINKUP), 20,
> > PCI_PM_D3COLD_WAIT * USEC_PER_MSEC);
> > if (err) {
> > + const char *ltssm_state;
> > + int ltssm_index;
> > +
> > val = readl_relaxed(pcie->base +
> > PCIE_LTSSM_STATUS_REG);
> > - dev_err(pcie->dev, "PCIe link down, ltssm reg val:
> > %#x\n", val);
> > + ltssm_index = PCIE_LTSSM_STATE(val);
> > + ltssm_state = ltssm_index >= ARRAY_SIZE(ltssm_str) ?
> > + "Unknown state" : ltssm_str[ltssm_index];
> > + dev_err(pcie->dev,
> > + "PCIe link down, current ltssm state: %s
> > (%#x)\n",
> > + ltssm_state, val);
> > return err;
> > }
> >
>
>
Powered by blists - more mailing lists