[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220518073844.2713722-1-tien.sung.ang@intel.com>
Date: Wed, 18 May 2022 15:38:44 +0800
From: tien.sung.ang@...el.com
To: mdf@...nel.org, hao.wu@...el.com, yilun.xu@...el.com,
trix@...hat.com
Cc: linux-fpga@...r.kernel.org, linux-kernel@...r.kernel.org,
Dinh Nguyen <dinh.nguyen@...el.com>,
Ang Tien Sung <tien.sung.ang@...el.com>
Subject: [PATCH] fpga: altera-cvp: allow interrupt to continue next time
From: Dinh Nguyen <dinh.nguyen@...el.com>
CFG_READY signal/bit may time-out due to firmware not responding
within the given time-out. This time varies due to numerous
factors like size of bitstream and others.
This time-out error does not impact the result of the CvP
previous transactions. The CvP driver shall then, respond with
EAGAIN instead Time out error.
Signed-off-by: Dinh Nguyen <dinh.nguyen@...el.com>
Signed-off-by: Ang Tien Sung <tien.sung.ang@...el.com>
---
drivers/fpga/altera-cvp.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
index 4ffb9da537d8..d74ff63c61e8 100644
--- a/drivers/fpga/altera-cvp.c
+++ b/drivers/fpga/altera-cvp.c
@@ -309,10 +309,22 @@ static int altera_cvp_teardown(struct fpga_manager *mgr,
/* STEP 15 - poll CVP_CONFIG_READY bit for 0 with 10us timeout */
ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0,
conf->priv->poll_time_us);
- if (ret)
+ if (ret) {
dev_err(&mgr->dev, "CFG_RDY == 0 timeout\n");
+ goto error_path;
+ }
return ret;
+
+error_path:
+ /* reset CVP_MODE and HIP_CLK_SEL bit */
+ altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
+ val &= ~VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
+ val &= ~VSE_CVP_MODE_CTRL_CVP_MODE;
+ altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
+
+ return -EAGAIN;
+
}
static int altera_cvp_write_init(struct fpga_manager *mgr,
--
2.25.1
Powered by blists - more mailing lists