| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJZ5v0h=fPp-JXkji5y07XBdYWWSzAb=sTabaaM3+spCJ1W1Cg@mail.gmail.com>
Date: Thu, 19 May 2022 19:21:36 +0200
From: "Rafael J. Wysocki" <rafael@...nel.org>
To: Daniel Lezcano <daniel.lezcano@...aro.org>
Cc: "Rafael J. Wysocki" <rafael@...nel.org>,
Linux PM mailing list <linux-pm@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Keerthy <j-keerthy@...com>, Miaoqian Lin <linmq006@...il.com>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Yang Yingliang <yangyingliang@...wei.com>,
Biju Das <biju.das@...renesas.com>,
Corentin Labbe <clabbe@...libre.com>,
Jiapeng Chong <jiapeng.chong@...ux.alibaba.com>,
Zheng Yongjun <zhengyongjun3@...wei.com>,
Manaf Meethalavalappu Pallikunhi <quic_manafm@...cinc.com>,
Stefan Wahren <stefan.wahren@...e.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Massimiliano Minella <massimiliano.minella@...il.com>,
Jishnu Prakash <jprakash@....qualcomm.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: Re: [GIT PULL] thermal for v5.19-rc1
On Thu, May 19, 2022 at 2:53 PM Daniel Lezcano
<daniel.lezcano@...aro.org> wrote:
>
>
> Hi Rafael,
>
> please consider pulling:
>
> The following changes since commit 7b145802ba545ecf9446ce6d67d6011b73dac0e0:
>
> thermal: int340x: Mode setting with new OS handshake (2022-05-11
> 20:08:15 +0200)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
> tags/thermal-v5.19-rc1
>
> for you to fetch changes up to ffcb2fc86eb7ebc9f5524525fb57e1cccfbd1fc0:
>
> thermal: k3_j72xx_bandgap: Add the bandgap driver support (2022-05-19
> 12:11:53 +0200)
>
> ----------------------------------------------------------------
> - Add the new k3 j72xx bangdap driver and the corresponding bindings
> (Keerthy)
>
> - Fix the missing of_node_put() in the SC iMX driver at probe timer
> (Miaoqian Lin)
>
> - Fix memory leak in __thermal_cooling_device_register() when
> device_register()
> fails by calling thermal_cooling_device_destroy_sysfs() (Yang Yingliang)
>
> - Add sc8180x and sc8280xp compatible string in the DT bindings and lMH
> support
> for QCom tsens driver (Bjorn Andersson)
>
> - Fix OTP Calibration Register values conforming to the documentation on
> RZ/G2L
> and bindings documentation for RZ/G2UL (Biju Das)
>
> - Fix type in kerneldoc description for __thermal_bind_params (Corentin
> Labbe)
>
> - Remove unneeded semi colon in libthermal and tools thermal as reported by
> cocci (Jiapeng Chong)
>
> - Fix potential NULL dereference in sr_thermal_probe() on Broadcom platform
> (Zheng Yongjun)
>
> - Add thermal library and thermal tools to encapsulate the netlink into
> event
> based callbacks (Daniel Lezcano)
>
> - Add change mode ops for the thermal-of sensor (Manaf Meethalavalappu
> Pallikunhi)
>
> - Fix non negative value support by preventing the value to be clamp to zero
> (Stefan Wahren)
>
> - Add compatible string and DT bindings for MSM8960 tsens driver (Dmitry
> Baryshkov)
>
> - Add hwmon support for K3 driver (Massimiliano Minella)
>
> - Refactor and add multiple generations support for QCom ADC driver (Jishnu
> Prakash)
>
> - Use platform_get_irq_optional() to get the interrupt on RCar driver and
> document Document RZ/V2L bindings (Lad Prabhakar)
>
> ----------------------------------------------------------------
> Biju Das (2):
> dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings
> thermal/drivers/rz2gl: Fix OTP Calibration Register values
>
> Bjorn Andersson (3):
> thermal/drivers/qcom/lmh: Add sc8180x compatible
> dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible
> dt-bindings: thermal: tsens: Add sc8280xp compatible
>
> Corentin Labbe (1):
> thermal: thermal_of: fix typo on __thermal_bind_params
>
> Daniel Lezcano (4):
> tools/lib/thermal: Add a thermal library
> tools/thermal: Add util library
> tools/thermal: Add a temperature capture tool
> tools/thermal: Add thermal daemon skeleton
>
> Dmitry Baryshkov (2):
> dt-bindings: thermal: qcom-tsens.yaml: add msm8960 compat string
> thermal/drivers/tsens: Add compat string for the qcom,msm8960
>
> Jiapeng Chong (2):
> tools/lib/thermal: remove unneeded semicolon
> tools/thermal: remove unneeded semicolon
>
> Jishnu Prakash (4):
> dt-bindings: thermal: qcom: add PMIC5 Gen2 ADC_TM bindings
> iio: adc: qcom-vadc-common: add reverse scaling for PMIC5 Gen2 ADC_TM
> thermal/drivers/qcom: Add support for multiple generations of devices
> thermal/drivers/qcom: Add support for PMIC5 Gen2 ADCTM
>
> Keerthy (2):
> dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
> thermal: k3_j72xx_bandgap: Add the bandgap driver support
>
> Lad Prabhakar (2):
> dt-bindings: thermal: rzg2l-thermal: Document RZ/V2L bindings
> thermal/drivers/rcar_thermal: Use platform_get_irq_optional() to
> get the interrupt
>
> Manaf Meethalavalappu Pallikunhi (1):
> thermal/drivers/thermal_of: Add change_mode ops support for
> thermal_of sensor
>
> Massimiliano Minella (1):
> thermal/drivers/k3: Add hwmon support
>
> Miaoqian Lin (1):
> thermal/drivers/imx_sc_thermal: Fix refcount leak in
> imx_sc_thermal_probe
>
> Stefan Wahren (1):
> thermal/drivers/bcm2711: Don't clamp temperature at zero
>
> Yang Yingliang (1):
> thermal/core: Fix memory leak in __thermal_cooling_device_register()
>
> Zheng Yongjun (1):
> thermal/drivers/broadcom: Fix potential NULL dereference in
> sr_thermal_probe
>
> .../devicetree/bindings/thermal/qcom-lmh.yaml | 1 +
> .../bindings/thermal/qcom-spmi-adc-tm5.yaml | 110 +++-
> .../devicetree/bindings/thermal/qcom-tsens.yaml | 5 +-
> .../devicetree/bindings/thermal/rzg2l-thermal.yaml | 2 +
> .../bindings/thermal/ti,j72xx-thermal.yaml | 63 +++
> MAINTAINERS | 1 +
> drivers/iio/adc/qcom-vadc-common.c | 11 +
> drivers/thermal/Makefile | 2 +-
> drivers/thermal/broadcom/bcm2711_thermal.c | 5 +-
> drivers/thermal/broadcom/sr-thermal.c | 3 +
> drivers/thermal/imx_sc_thermal.c | 6 +-
> drivers/thermal/k3_bandgap.c | 5 +
> drivers/thermal/k3_j72xx_bandgap.c | 566
> ++++++++++++++++++++
> drivers/thermal/qcom/lmh.c | 1 +
> drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 486 +++++++++++++++--
> drivers/thermal/qcom/tsens.c | 3 +
> drivers/thermal/rcar_thermal.c | 17 +-
> drivers/thermal/rzg2l_thermal.c | 10 +-
> drivers/thermal/thermal_core.c | 1 +
> drivers/thermal/thermal_of.c | 14 +-
> include/linux/iio/adc/qcom-vadc-common.h | 2 +
> include/linux/thermal.h | 3 +
> tools/Makefile | 36 +-
> tools/lib/thermal/.gitignore | 2 +
> tools/lib/thermal/Build | 5 +
> tools/lib/thermal/Makefile | 165 ++++++
> tools/lib/thermal/commands.c | 349 +++++++++++++
> tools/lib/thermal/events.c | 164 ++++++
> tools/lib/thermal/include/thermal.h | 142 +++++
> tools/lib/thermal/libthermal.map | 25 +
> tools/lib/thermal/libthermal.pc.template | 12 +
> tools/lib/thermal/sampling.c | 75 +++
> tools/lib/thermal/thermal.c | 135 +++++
> tools/lib/thermal/thermal_nl.c | 215 ++++++++
> tools/lib/thermal/thermal_nl.h | 46 ++
> tools/thermal/lib/Build | 3 +
> tools/thermal/lib/Makefile | 158 ++++++
> tools/thermal/lib/libthermal_tools.pc.template | 12 +
> tools/thermal/lib/log.c | 77 +++
> tools/thermal/lib/log.h | 31 ++
> tools/thermal/lib/mainloop.c | 120 +++++
> tools/thermal/lib/mainloop.h | 15 +
> tools/thermal/lib/thermal-tools.h | 10 +
> tools/thermal/lib/uptimeofday.c | 40 ++
> tools/thermal/lib/uptimeofday.h | 12 +
> tools/thermal/thermal-engine/Build | 1 +
> tools/thermal/thermal-engine/Makefile | 28 +
> tools/thermal/thermal-engine/thermal-engine.c | 341 ++++++++++++
> tools/thermal/thermometer/Build | 1 +
> tools/thermal/thermometer/Makefile | 26 +
> tools/thermal/thermometer/thermometer.8 | 92 ++++
> tools/thermal/thermometer/thermometer.c | 572
> +++++++++++++++++++++
> tools/thermal/thermometer/thermometer.conf | 5 +
> 53 files changed, 4173 insertions(+), 59 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
> create mode 100644 drivers/thermal/k3_j72xx_bandgap.c
> create mode 100644 tools/lib/thermal/.gitignore
> create mode 100644 tools/lib/thermal/Build
> create mode 100644 tools/lib/thermal/Makefile
> create mode 100644 tools/lib/thermal/commands.c
> create mode 100644 tools/lib/thermal/events.c
> create mode 100644 tools/lib/thermal/include/thermal.h
> create mode 100644 tools/lib/thermal/libthermal.map
> create mode 100644 tools/lib/thermal/libthermal.pc.template
> create mode 100644 tools/lib/thermal/sampling.c
> create mode 100644 tools/lib/thermal/thermal.c
> create mode 100644 tools/lib/thermal/thermal_nl.c
> create mode 100644 tools/lib/thermal/thermal_nl.h
> create mode 100644 tools/thermal/lib/Build
> create mode 100644 tools/thermal/lib/Makefile
> create mode 100644 tools/thermal/lib/libthermal_tools.pc.template
> create mode 100644 tools/thermal/lib/log.c
> create mode 100644 tools/thermal/lib/log.h
> create mode 100644 tools/thermal/lib/mainloop.c
> create mode 100644 tools/thermal/lib/mainloop.h
> create mode 100644 tools/thermal/lib/thermal-tools.h
> create mode 100644 tools/thermal/lib/uptimeofday.c
> create mode 100644 tools/thermal/lib/uptimeofday.h
> create mode 100644 tools/thermal/thermal-engine/Build
> create mode 100644 tools/thermal/thermal-engine/Makefile
> create mode 100644 tools/thermal/thermal-engine/thermal-engine.c
> create mode 100644 tools/thermal/thermometer/Build
> create mode 100644 tools/thermal/thermometer/Makefile
> create mode 100644 tools/thermal/thermometer/thermometer.8
> create mode 100644 tools/thermal/thermometer/thermometer.c
> create mode 100644 tools/thermal/thermometer/thermometer.conf
Pulled and pushed out, thanks!
Powered by blists - more mailing lists