[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220519081808.3776-8-ilpo.jarvinen@linux.intel.com>
Date: Thu, 19 May 2022 11:18:06 +0300
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: linux-serial@...r.kernel.org, Greg KH <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>,
Shubhrajyoti Datta <shubhrajyoti.datta@...il.com>,
Patrice Chotard <patrice.chotard@...s.st.com>,
Srinivas Kandagatla <srinivas.kandagatla@...com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Subject: [PATCH v2 7/9] serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or
CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has
to have parity, thus add PARENB.
Incorrect CSIZE results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Cc: Srinivas Kandagatla <srinivas.kandagatla@...com>
Fixes: c4b058560762 (serial:st-asc: Add ST ASC driver.)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
---
drivers/tty/serial/st-asc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index d7fd692286cf..1b0da603ab54 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -535,10 +535,14 @@ static void asc_set_termios(struct uart_port *port, struct ktermios *termios,
/* set character length */
if ((cflag & CSIZE) == CS7) {
ctrl_val |= ASC_CTL_MODE_7BIT_PAR;
+ cflag |= PARENB;
} else {
ctrl_val |= (cflag & PARENB) ? ASC_CTL_MODE_8BIT_PAR :
ASC_CTL_MODE_8BIT;
+ cflag &= ~CSIZE;
+ cflag |= CS8;
}
+ termios->c_cflag = cflag;
/* set stop bit */
ctrl_val |= (cflag & CSTOPB) ? ASC_CTL_STOP_2BIT : ASC_CTL_STOP_1BIT;
--
2.30.2
Powered by blists - more mailing lists