| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3644ad8a-d5d8-8ea2-b659-029619c64f1f@linaro.org>
Date: Thu, 19 May 2022 11:42:17 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Alec Su <ae40515@...oo.com.tw>, agross@...nel.org,
bjorn.andersson@...aro.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, sboyd@...eaurora.org
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, y.oudjana@...tonmail.com
Subject: Re: [PATCH 1/2] arm64: dts: qcom: msm8996-xiaomi-natrium: Add support
for Xiaomi Mi 5s Plus
On 19/05/2022 09:41, Alec Su wrote:
> Add the device tree for Xiaomi Mi 5s Plus (natrium).
>
> Signed-off-by: Alec Su <ae40515@...oo.com.tw>
> Reviewed-by: Yassine Oudjana <y.oudjana@...tonmail.com>
This is the first patch, so the review tag is a bit unexepected. Was it
really given?
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/msm8996-xiaomi-natrium.dts | 419 ++++++++++++++++++
> 2 files changed, 420 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 2f8aec2cc6db..3ae7ecd369fb 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -37,6 +37,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-gemini.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-natrium.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-scorpio.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-fxtec-pro1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts
> new file mode 100644
> index 000000000000..212ff0fbf262
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts
> @@ -0,0 +1,419 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*> + * Copyright (c) 2022, Alec Su <ae40515@...oo.com.tw>
> + */
> +
> +/dts-v1/;
> +
> +#include "msm8996-xiaomi-common.dtsi"
> +#include "pmi8996.dtsi"
> +#include <dt-bindings/sound/qcom,q6afe.h>
> +#include <dt-bindings/sound/qcom,q6asm.h>
> +
> +/ {
> + model = "Xiaomi Mi 5s Plus";
> + compatible = "xiaomi,natrium", "qcom,msm8996";
> + chassis-type = "handset";
> + qcom,msm-id = <305 0x10000>;
There is no such property documented. Either add bindings, or drop.
> + qcom,board-id = <47 0>;
The same.
> +};
> +
> +&adsp_pil {
> + firmware-name = "qcom/msm8996/natrium/adsp.mbn";
> +};
> +
> +&blsp2_i2c6 {
> + synaptics@20 {
> + compatible = "syna,rmi4-i2c";
> + reg = <0x20>;
> + #address-cells = <1>;
> + #size-cells = <0>;
Why do you have address/size cells here?
> + interrupt-parent = <&tlmm>;
> + interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
> + vdda-supply = <&vreg_l6a_1p8>;
> + vdd-supply = <&vdd_3v2_tp>;
> + reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&touchscreen_default>;
> + pinctrl-1 = <&touchscreen_sleep>;
> + };
> +
No need for blank line.
> +};
> +
> +&dsi0 {
> + status = "okay";
> +
> + vdd-supply = <&vreg_l2a_1p25>;
> + vdda-supply = <&vreg_l19a_3p3>;
> + vddio-supply = <&vreg_l14a_1p8>;
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
> + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
> +
> + panel: panel@0 {
> + compatible = "jdi,fhd-r63452";
> + reg = <0>;
> + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
> + backlight = <&pmi8994_wled>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi0_out>;
> + };
> + };
> + };
> +};
> +
> +&dsi0_out {
> + remote-endpoint = <&panel_in>;
> +};
> +
> +&gpu {
> + zap-shader {
> + firmware-name = "qcom/msm8996/natrium/a530_zap.mbn";
> + };
> +};
> +
> +&mss_pil {
> + firmware-name = "qcom/msm8996/natrium/mba.mbn",
> + "qcom/msm8996/natrium/modem.mbn";
> +};
> +
> +&pmi8994_wled {
> + status = "okay";
> +
> + qcom,num-strings = <2>;
> + qcom,enabled-strings = <0 1>;
> + qcom,switching-freq = <600>;
> +};
> +
> +&q6asmdai {
> + dai@0 {
> + reg = <0>;
> + };
> +
> + dai@1 {
> + reg = <1>;
> + };
> +
> + dai@2 {
> + reg = <2>;
> + };
> +};
> +
> +&slpi_pil {
> + firmware-name = "qcom/msm8996/natrium/slpi.mbn";
> +};
> +
> +&sound {
> + compatible = "qcom,apq8096-sndcard";
> + model = "natrium";
> + audio-routing = "RX_BIAS", "MCLK";
> +
> + mm1-dai-link {
> + link-name = "MultiMedia1";
> + cpu {
> + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
> + };
> + };
> +
> + mm2-dai-link {
> + link-name = "MultiMedia2";
> + cpu {
> + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
> + };
> + };
> +
> + mm3-dai-link {
> + link-name = "MultiMedia3";
> + cpu {
> + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
> + };
> + };
> +
> + slim-dai-link {
> + link-name = "SLIM Playback";
> + cpu {
> + sound-dai = <&q6afedai SLIMBUS_6_RX>;
> + };
> +
> + platform {
> + sound-dai = <&q6routing>;
> + };
> +
> + codec {
> + sound-dai = <&wcd9335 6>;
> + };
> + };
> +
> + slimcap-dai-link {
> + link-name = "SLIM Capture";
> + cpu {
> + sound-dai = <&q6afedai SLIMBUS_0_TX>;
> + };
> +
> + platform {
> + sound-dai = <&q6routing>;
> + };
> +
> + codec {
> + sound-dai = <&wcd9335 1>;
> + };
> + };
> +};
> +
> +&venus {
> + firmware-name = "qcom/msm8996/natrium/venus.mbn";
> +};
> +
> +&rpm_requests {
> + pm8994-regulators {
> + vreg_l3a_0p875: l3 {
> + regulator-name = "vreg_l3a_0p875";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1300000>;
> + };
> + vreg_l11a_1p1: l11 {
> + regulator-name = "vreg_l11a_1p1";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + };
> + vreg_l17a_2p8: l17 {
> + regulator-name = "vreg_l17a_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> + vreg_l18a_2p8: l18 {
> + regulator-name = "vreg_l18a_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> + vreg_l29a_2p8: l29 {
> + regulator-name = "vreg_l29a_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> + };
> +};
> +
> +&pm8994_gpios {
> + gpio-line-names =
> + "NC", /* GPIO_1 */
> + "VOL_UP_N", /* GPIO_2 */
> + "SPKR_ID", /* GPIO_3 */
> + "PWM_HAPTICS", /* GPIO_4 */
> + "INFARED_DRV", /* GPIO_5 */
> + "NC", /* GPIO_6 */
> + "KEYPAD_LED_EN_A", /* GPIO_7 */
> + "WL_EN", /* GPIO_8 */
> + "3P3_ENABLE", /* GPIO_9 */
> + "NC", /* GPIO_10 */
> + "NC", /* GPIO_11 */
> + "NC", /* GPIO_12 */
> + "NC", /* GPIO_13 */
> + "NC", /* GPIO_14 */
> + "DIVCLK1_CDC", /* GPIO_15 */
> + "DIVCLK2_HAPTICS", /* GPIO_16 */
> + "NC", /* GPIO_17 */
> + "32KHz_CLK_IN", /* GPIO_18 */
> + "BT_EN", /* GPIO_19 */
> + "PMIC_SLB", /* GPIO_20 */
> + "UIM_BATT_ALARM", /* GPIO_21 */
> + "NC"; /* GPIO_22 */
> +};
> +
> +&pm8994_mpps {
> + gpio-line-names =
> + "NC", /* MPP_1 */
> + "CCI_TIMER1", /* MPP_2 */
> + "PMIC_SLB", /* MPP_3 */
> + "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */
> + "NC", /* MPP_5 */
> + "NC", /* MPP_6 */
> + "NC", /* MPP_7 */
> + "NC"; /* MPP_8 */
> +};
> +
> +&pmi8994_gpios {
> + gpio-line-names =
> + "NC", /* GPIO_1 */
> + "SPKR_PA_EN", /* GPIO_2 */
> + "NC", /* GPIO_3 */
> + "NC", /* GPIO_4 */
> + "NC", /* GPIO_5 */
> + "NC", /* GPIO_6 */
> + "NC", /* GPIO_7 */
> + "NC", /* GPIO_8 */
> + "NC", /* GPIO_9 */
> + "NC"; /* GPIO_10 */
> +};
> +
> +&tlmm {
> + gpio-line-names =
> + "ESE_SPI_MOSI", /* GPIO_0 */
> + "ESE_SPI_MISO", /* GPIO_1 */
> + "NC", /* GPIO_2 */
> + "ESE_SPI_CLK", /* GPIO_3 */
> + "MSM_UART_TX", /* GPIO_4 */
> + "MSM_UART_RX", /* GPIO_5 */
> + "NFC_I2C_SDA", /* GPIO_6 */
> + "NFC_I2C_SCL", /* GPIO_7 */
> + "LCD0_RESET_N", /* GPIO_8 */
> + "NFC_IRQ", /* GPIO_9 */
> + "LCD_TE", /* GPIO_10 */
> + "LCD_ID_DET1", /* GPIO_11 */
> + "NFC_DISABLE", /* GPIO_12 */
> + "CAM_MCLK0", /* GPIO_13 */
> + "CAM_MCLK1", /* GPIO_14 */
> + "CAM_MCLK2", /* GPIO_15 */
> + "ESE_PWR_REQ", /* GPIO_16 */
> + "CCI_I2C_SDA0", /* GPIO_17 */
> + "CCI_I2C_SCL0", /* GPIO_18 */
> + "CCI_I2C_SDA1", /* GPIO_19 */
> + "CCI_I2C_SCL1", /* GPIO_20 */
> + "NFC_DWL_REQ", /* GPIO_21 */
> + "CCI_TIMER1", /* GPIO_22 */
> + "WEBCAM1_RESET_N", /* GPIO_23 */
> + "ESE_IRQ", /* GPIO_24 */
> + "NC", /* GPIO_25 */
> + "WEBCAM1_STANDBY", /* GPIO_26 */
> + "NC", /* GPIO_27 */
> + "NC", /* GPIO_28 */
> + "NC", /* GPIO_29 */
> + "CAM_VDD_1P2_EN_2", /* GPIO_30 */
> + "CAM_RESET_0", /* GPIO_31 */
> + "CAM_RESET_1", /* GPIO_32 */
> + "NC", /* GPIO_33 */
> + "NC", /* GPIO_34 */
> + "PCI_E0_RST_N", /* GPIO_35 */
> + "PCI_E0_CLKREQ_N", /* GPIO_36 */
> + "PCI_E0_WAKE", /* GPIO_37 */
> + "CHARGER_INT", /* GPIO_38 */
> + "CHARGER_RESET", /* GPIO_39 */
> + "NC", /* GPIO_40 */
> + "QCA_UART_TXD", /* GPIO_41 */
> + "QCA_UART_RXD", /* GPIO_42 */
> + "QCA_UART_CTS", /* GPIO_43 */
> + "QCA_UART_RTS", /* GPIO_44 */
> + "MAWC_UART_TX", /* GPIO_45 */
> + "MAWC_UART_RX", /* GPIO_46 */
> + "NC", /* GPIO_47 */
> + "NC", /* GPIO_48 */
> + "NC", /* GPIO_49 */
> + "FP_SPI_RST", /* GPIO_50 */
> + "TYPEC_I2C_SDA", /* GPIO_51 */
> + "TYPEC_I2C_SCL", /* GPIO_52 */
> + "CODEC_INT2_N", /* GPIO_53 */
> + "CODEC_INT1_N", /* GPIO_54 */
> + "APPS_I2C7_SDA", /* GPIO_55 */
> + "APPS_I2C7_SCL", /* GPIO_56 */
> + "FORCE_USB_BOOT", /* GPIO_57 */
> + "NC", /* GPIO_58 */
> + "NC", /* GPIO_59 */
> + "NC", /* GPIO_60 */
> + "NC", /* GPIO_61 */
> + "ESE_RSTN", /* GPIO_62 */
> + "TYPEC_INT", /* GPIO_63 */
> + "CODEC_RESET_N", /* GPIO_64 */
> + "PCM_CLK", /* GPIO_65 */
> + "PCM_SYNC", /* GPIO_66 */
> + "PCM_DIN", /* GPIO_67 */
> + "PCM_DOUT", /* GPIO_68 */
> + "CDC_44K1_CLK", /* GPIO_69 */
> + "SLIMBUS_CLK", /* GPIO_70 */
> + "SLIMBUS_DATA0", /* GPIO_71 */
> + "SLIMBUS_DATA1", /* GPIO_72 */
> + "LDO_5V_IN_EN", /* GPIO_73 */
> + "TYPEC_EN_N", /* GPIO_74 */
> + "NC", /* GPIO_75 */
> + "NC", /* GPIO_76 */
> + "NC", /* GPIO_77 */
> + "NC", /* GPIO_78 */
> + "NC", /* GPIO_79 */
> + "SENSOR_RESET_N", /* GPIO_80 */
> + "FP_SPI_MOSI", /* GPIO_81 */
> + "FP_SPI_MISO", /* GPIO_82 */
> + "FP_SPI_CS_N", /* GPIO_83 */
> + "FP_SPI_CLK", /* GPIO_84 */
> + "NC", /* GPIO_85 */
> + "CAM_VDD_1P2_EN", /* GPIO_86 */
> + "MSM_TS_I2C_SDA", /* GPIO_87 */
> + "MSM_TS_I2C_SCL", /* GPIO_88 */
> + "TS_RESOUT_N", /* GPIO_89 */
> + "ESE_SPI_CS_N", /* GPIO_90 */
> + "NC", /* GPIO_91 */
> + "CAM2_AVDD_EN", /* GPIO_92 */
> + "CAM2_VCM_EN", /* GPIO_93 */
> + "NC", /* GPIO_94 */
> + "NC", /* GPIO_95 */
> + "NC", /* GPIO_96 */
> + "GRFC_0", /* GPIO_97 */
> + "GRFC_1", /* GPIO_98 */
> + "NC", /* GPIO_99 */
> + "GRFC_3", /* GPIO_100 */
> + "GRFC_4", /* GPIO_101 */
> + "GRFC_5", /* GPIO_102 */
> + "NC", /* GPIO_103 */
> + "GRFC_7", /* GPIO_104 */
> + "UIM2_DATA", /* GPIO_105 */
> + "UIM2_CLK", /* GPIO_106 */
> + "UIM2_RESET", /* GPIO_107 */
> + "UIM2_PRESENT", /* GPIO_108 */
> + "UIM1_DATA", /* GPIO_109 */
> + "UIM1_CLK", /* GPIO_110 */
> + "UIM1_RESET", /* GPIO_111 */
> + "UIM1_PRESENT", /* GPIO_112 */
> + "UIM_BATT_ALARM", /* GPIO_113 */
> + "GRFC_8", /* GPIO_114 */
> + "GRFC_9", /* GPIO_115 */
> + "TX_GTR_THRES", /* GPIO_116 */
> + "ACCEL_INT", /* GPIO_117 */
> + "GYRO_INT", /* GPIO_118 */
> + "COMPASS_INT", /* GPIO_119 */
> + "PROXIMITY_INT_N", /* GPIO_120 */
> + "FP_IRQ", /* GPIO_121 */
> + "P_SENSE", /* GPIO_122 */
> + "HALL_INTR2", /* GPIO_123 */
> + "HALL_INTR1", /* GPIO_124 */
> + "TS_INT_N", /* GPIO_125 */
> + "NC", /* GPIO_126 */
> + "GRFC_11", /* GPIO_127 */
> + "NC", /* GPIO_128 */
> + "EXT_GPS_LNA_EN", /* GPIO_129 */
> + "NC", /* GPIO_130 */
> + "LCD_ID_DET2", /* GPIO_131 */
> + "LCD_TE2", /* GPIO_132 */
> + "GRFC_14", /* GPIO_133 */
> + "GSM_TX2_PHASE_D", /* GPIO_134 */
> + "NC", /* GPIO_135 */
> + "GRFC_15", /* GPIO_136 */
> + "RFFE3_DATA", /* GPIO_137 */
> + "RFFE3_CLK", /* GPIO_138 */
> + "NC", /* GPIO_139 */
> + "NC", /* GPIO_140 */
> + "RFFE5_DATA", /* GPIO_141 */
> + "RFFE5_CLK", /* GPIO_142 */
> + "NC", /* GPIO_143 */
> + "COEX_UART_TX", /* GPIO_144 */
> + "COEX_UART_RX", /* GPIO_145 */
> + "RFFE2_DATA", /* GPIO_146 */
> + "RFFE2_CLK", /* GPIO_147 */
> + "RFFE1_DATA", /* GPIO_148 */
> + "RFFE1_CLK"; /* GPIO_149 */
> +
> + touchscreen_default: touchscreen_default {
No underscores in node names.
> + pins = "gpio89", "gpio125";
> + function = "gpio";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> +
> + touchscreen_sleep: touchscreen_sleep {
The same.
> + pins = "gpio89", "gpio125";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +};
Best regards,
Krzysztof
Powered by blists - more mailing lists