| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220520224011.GA374485-robh@kernel.org>
Date: Fri, 20 May 2022 17:40:11 -0500
From: Rob Herring <robh@...nel.org>
To: Sibi Sankar <quic_sibis@...cinc.com>
Cc: bjorn.andersson@...aro.org, krzysztof.kozlowski+dt@...aro.org,
ohad@...ery.com, agross@...nel.org, mathieu.poirier@...aro.org,
linux-arm-msm@...r.kernel.org, linux-remoteproc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
swboyd@...omium.org, mka@...omium.org
Subject: Re: [PATCH v4 3/3] dt-bindings: remoteproc: qcom: Convert SC7180 MSS
bindings to YAML
On Thu, May 19, 2022 at 10:17:05PM +0530, Sibi Sankar wrote:
> Convert SC7180 MSS PIL loading bindings to YAML.
I suppose there is a reason the sc7180 is being split out and the only
one converted, but this doesn't tell me.
>
> Signed-off-by: Sibi Sankar <quic_sibis@...cinc.com>
> ---
> .../devicetree/bindings/remoteproc/qcom,q6v5.txt | 20 +-
> .../bindings/remoteproc/qcom,sc7180-mss-pil.yaml | 236 +++++++++++++++++++++
> 2 files changed, 238 insertions(+), 18 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> index 1ec9093c3a82..1a691c1435f3 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> @@ -14,7 +14,6 @@ on the Qualcomm Hexagon core.
> "qcom,msm8974-mss-pil"
> "qcom,msm8996-mss-pil"
> "qcom,msm8998-mss-pil"
> - "qcom,sc7180-mss-pil"
> "qcom,sdm845-mss-pil"
>
> - reg:
> @@ -46,7 +45,6 @@ on the Qualcomm Hexagon core.
> must be "wdog", "fatal", "ready", "handover", "stop-ack"
> qcom,msm8996-mss-pil:
> qcom,msm8998-mss-pil:
> - qcom,sc7180-mss-pil:
> qcom,sdm845-mss-pil:
> must be "wdog", "fatal", "ready", "handover", "stop-ack",
> "shutdown-ack"
> @@ -84,9 +82,6 @@ on the Qualcomm Hexagon core.
> qcom,msm8998-mss-pil:
> must be "iface", "bus", "mem", "xo", "gpll0_mss",
> "snoc_axi", "mnoc_axi", "qdss"
> - qcom,sc7180-mss-pil:
> - must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
> - "nav"
> qcom,sdm845-mss-pil:
> must be "iface", "bus", "mem", "xo", "gpll0_mss",
> "snoc_axi", "mnoc_axi", "prng"
> @@ -98,7 +93,7 @@ on the Qualcomm Hexagon core.
> reference to the list of 3 reset-controllers for the
> wcss sub-system
> reference to the list of 2 reset-controllers for the modem
> - sub-system on SC7180, SDM845 SoCs
> + sub-system on SDM845 SoCs
>
> - reset-names:
> Usage: required
> @@ -107,7 +102,7 @@ on the Qualcomm Hexagon core.
> must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
> for the wcss sub-system
> must be "mss_restart", "pdc_reset" for the modem
> - sub-system on SC7180, SDM845 SoCs
> + sub-system on SDM845 SoCs
>
> For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
> should be referenced as follows:
> @@ -172,8 +167,6 @@ For the compatible string below the following supplies are required:
> qcom,msm8996-mss-pil:
> qcom,msm8998-mss-pil:
> must be "cx", "mx"
> - qcom,sc7180-mss-pil:
> - must be "cx", "mx", "mss"
> qcom,sdm845-mss-pil:
> must be "cx", "mx", "mss"
>
> @@ -200,15 +193,6 @@ For the compatible string below the following supplies are required:
> by the three offsets within syscon for q6, modem and nc
> halt registers.
>
> -For the compatible strings below the following phandle references are required:
> - "qcom,sc7180-mss-pil"
> -- qcom,spare-regs:
> - Usage: required
> - Value type: <prop-encoded-array>
> - Definition: a phandle reference to a syscon representing TCSR followed
> - by the offset within syscon for conn_box_spare0 register
> - used by the modem sub-system running on SC7180 SoC.
> -
> The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
> on platforms which do not have TrustZone.
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
> new file mode 100644
> index 000000000000..b00fdf9e3eeb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
> @@ -0,0 +1,236 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,sc7180-mss-pil.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SC7180 MSS Peripheral Image Loader
> +
> +maintainers:
> + - Sibi Sankar <quic_sibis@...cinc.com>
> +
> +description:
> + This document describes the hardware for a component that loads and boots firmware
> + on the Qualcomm Technology Inc. SC7180 Modem Hexagon Core.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,sc7180-mss-pil
> +
> + reg:
> + items:
> + - description: MSS QDSP6 registers
> + - description: RMB registers
> +
> + reg-names:
> + items:
> + - const: qdsp6
> + - const: rmb
> +
> + iommus:
> + items:
> + - description: MSA Stream 1
> + - description: MSA Stream 2
> +
> + interrupts:
> + items:
> + - description: Watchdog interrupt
> + - description: Fatal interrupt
> + - description: Ready interrupt
> + - description: Handover interrupt
> + - description: Stop acknowledge interrupt
> + - description: Shutdown acknowledge interrupt
> +
> + interrupt-names:
> + items:
> + - const: wdog
> + - const: fatal
> + - const: ready
> + - const: handover
> + - const: stop-ack
> + - const: shutdown-ack
> +
> + clocks:
> + items:
> + - description: GCC MSS IFACE clock
> + - description: GCC MSS BUS clock
> + - description: GCC MSS NAV clock
> + - description: GCC MSS SNOC_AXI clock
> + - description: GCC MSS MFAB_AXIS clock
> + - description: RPMH XO clock
> +
> + clock-names:
> + items:
> + - const: iface
> + - const: bus
> + - const: nav
> + - const: snoc_axi
> + - const: mnoc_axi
> + - const: xo
> +
> + power-domains:
> + items:
> + - description: CX power domain
> + - description: MX power domain
> + - description: MSS power domain
> +
> + power-domain-names:
> + items:
> + - const: cx
> + - const: mx
> + - const: mss
> +
> + resets:
> + items:
> + - description: AOSS restart
> + - description: PDC reset
> +
> + reset-names:
> + items:
> + - const: mss_restart
> + - const: pdc_reset
> +
> + memory-region:
> + maxItems: 2
> + description: Phandle reference to the reserved-memory for the MBA region followed
> + by the modem region.
Use 'items' to describe each entry.
> +
> + firmware-name:
> + $ref: /schemas/types.yaml#/definitions/string-array
> + maxItems: 2
> + description:
> + The name of the MBA and modem firmware to be loaded for this remote processor.
> +
> + qcom,halt-regs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + Phandle reference to a syscon representing TCSR followed by the
> + three offsets within syscon for q6, modem and nc halt registers.
You need to define this as a schema:
items:
- items:
- description: ...
- description: ...
- description: ...
- description: ...
> +
> + qcom,spare-regs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + Phandle reference to a syscon representing TCSR followed by the
> + offset within syscon for conn_box_spare0 register.
Same here.
> +
> + qcom,qmp:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: Reference to the AOSS side-channel message RAM.
> +
> + qcom,smem-states:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
I believe there's a common schema for this now or one pending so you
should drop the type here.
> + description: States used by the AP to signal the Hexagon core
> + items:
> + - description: Stop the modem
That's not sufficient for a phandle-array which is really a matrix.
> +
> + qcom,smem-state-names:
> + description: The names of the state bits used for SMP2P output
> + const: stop
> +
> + glink-edge:
> + $ref: qcom,glink-edge.yaml#
> + description:
> + Qualcomm G-Link subnode which represents communication edge, channels
> + and devices related to the DSP.
> +
> + properties:
> + interrupts:
> + items:
> + - description: IRQ from MSS to GLINK
> +
> + mboxes:
> + items:
> + - description: Mailbox for communication between APPS and MSS
> +
> + label:
> + items:
Only 1, you can drop 'items'. And 'label' is always 1 entry.
> + - const: modem
> +
> + apr: false
> + fastrpc: false
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - iommus
> + - interrupts
> + - interrupt-names
> + - clocks
> + - clock-names
> + - power-domains
> + - power-domain-names
> + - resets
> + - reset-names
> + - qcom,halt-regs
> + - qcom,spare-regs
> + - memory-region
> + - qcom,qmp
> + - qcom,smem-states
> + - qcom,smem-state-names
> + - glink-edge
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> + #include <dt-bindings/clock/qcom,rpmh.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> + #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> + #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> +
> + remoteproc_mpss: remoteproc@...0000 {
> + compatible = "qcom,sc7180-mss-pil";
> + reg = <0x04080000 0x10000>, <0x04180000 0x48>;
> + reg-names = "qdsp6", "rmb";
> +
> + iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
> +
> + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> +
> + interrupt-names = "wdog", "fatal", "ready", "handover",
> + "stop-ack", "shutdown-ack";
> +
> + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
> + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
> + <&gcc GCC_MSS_NAV_AXI_CLK>,
> + <&gcc GCC_MSS_SNOC_AXI_CLK>,
> + <&gcc GCC_MSS_MFAB_AXIS_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface", "bus", "nav", "snoc_axi",
> + "mnoc_axi", "xo";
> +
> + power-domains = <&rpmhpd SC7180_CX>,
> + <&rpmhpd SC7180_MX>,
> + <&rpmhpd SC7180_MSS>;
> + power-domain-names = "cx", "mx", "mss";
> +
> + memory-region = <&mba_mem>, <&mpss_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&modem_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
> + <&pdc_reset PDC_MODEM_SYNC_RESET>;
> + reset-names = "mss_restart", "pdc_reset";
> +
> + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
> + qcom,spare-regs = <&tcsr_regs 0xb3e4>;
> +
> + glink-edge {
> + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&apss_shared 12>;
> + qcom,remote-pid = <1>;
> + label = "modem";
> + };
> + };
> --
> 2.7.4
>
>
Powered by blists - more mailing lists