[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1653049124-24713-12-git-send-email-quic_srivasam@quicinc.com>
Date: Fri, 20 May 2022 17:48:43 +0530
From: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
To: <agross@...nel.org>, <bjorn.andersson@...aro.org>,
<robh+dt@...nel.org>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<quic_rohkumar@...cinc.com>, <srinivas.kandagatla@...aro.org>,
<dianders@...omium.org>, <swboyd@...omium.org>,
<judyhsiao@...omium.org>
CC: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>,
"Venkata Prasad Potturu" <quic_potturu@...cinc.com>
Subject: [PATCH v12 11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards
Add dt nodes for sound card support on revision 3, 4
(aka CRD 1.0 and 2.0) and IDP boards, which is using WCD9385 headset
playback, capture, I2S speaker playback and DMICs via VA macro.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
---
arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 23 +++++++
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 98 ++++++++++++++++++++++++++++++
2 files changed, 121 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index 9c21207..dddb505 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -87,6 +87,29 @@ ap_ts_pen_1v8: &i2c13 {
pins = "gpio51";
};
+&sound {
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS1",
+ "VA DMIC1", "MIC BIAS1",
+ "VA DMIC2", "MIC BIAS3",
+ "VA DMIC3", "MIC BIAS3",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+};
+
&wcd9385 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 10f646d..ec2b6c9 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -85,6 +85,104 @@
pinctrl-names = "default";
pinctrl-0 = <&nvme_pwren>;
};
+
+ sound: sound {
+ compatible = "google,sc7280-herobrine";
+ model = "sc7280-wcd938x-max98360a-1mic";
+
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS3",
+ "VA DMIC1", "MIC BIAS3",
+ "VA DMIC2", "MIC BIAS1",
+ "VA DMIC3", "MIC BIAS1",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+ qcom,msm-mbhc-hphl-swh = <1>;
+ qcom,msm-mbhc-gnd-swh = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
+
+ dai-link@0 {
+ link-name = "MAX98360A";
+ reg = <0>;
+
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+ };
+
+ codec {
+ sound-dai = <&max98360a>;
+ };
+ };
+
+ dai-link@1 {
+ link-name = "DisplayPort";
+ reg = <1>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_DP_RX>;
+ };
+
+ codec {
+ sound-dai = <&mdss_dp>;
+ };
+ };
+
+ dai-link@2 {
+ link-name = "WCD9385 Playback";
+ reg = <2>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+ };
+ };
+
+ dai-link@3 {
+ link-name = "WCD9385 Capture";
+ reg = <3>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+ };
+ };
+
+ dai-link@4 {
+ link-name = "DMIC";
+ reg = <4>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+ };
+
+ codec {
+ sound-dai = <&lpass_va_macro 0>;
+ };
+ };
+ };
};
&apps_rsc {
--
2.7.4
Powered by blists - more mailing lists