[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220522162802.208275-1-luca@z3ntu.xyz>
Date: Sun, 22 May 2022 18:27:48 +0200
From: Luca Weiss <luca@...tu.xyz>
To: linux-arm-msm@...r.kernel.org
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
Loic Poulain <loic.poulain@...aro.org>,
Robert Foss <robert.foss@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Todor Tomov <todor.too@...il.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
linux-i2c@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
matti.lehtimaki@...il.com, Luca Weiss <luca@...tu.xyz>
Subject: [RFC PATCH 00/14] CAMSS support for MSM8974
This RFC series adds support for CAMSS and CCI that are found on
msm8974, including the OV8865 found on the FP2.
The only reason it's marked RFC is that CAMSS doesn't behave properly on
this SoC without the last commit which is obviously not upstreamable.
Not sure if this should be a blocker for including most of the other
patches because other than that it seems to work fine and I can get a
picture from the camera sensor. When/if msm8974 gets IOMMU support I
hope this should be resolved and it works without this hack.
I think at least the CCI patches could get applied as they're not
dependent on the CAMSS hack?
Luca Weiss (5):
dt-bindings: i2c: qcom-cci: add QCOM MSM8974 compatible
ARM: dts: qcom: msm8974: add CCI bus
ARM: dts: qcom: msm8974: add CAMSS node
ARM: dts: qcom: msm8974-FP2: Add OV8865 rear camera
[DNM] media: camss: hacks for MSM8974
Matti Lehtimäki (9):
media: dt-bindings: media: camss: Add qcom,msm8974-camss binding
media: camss: Add CAMSS_8x74 camss version
media: camss: vfe: Add support for 8x74
media: camss: video: Add support for 8x74
media: camss: csid: Add support for 8x74
media: camss: ispif: Add support for 8x74
media: camss: csiphy: Add support for 8x74
media: camss: Add 8x74 resources
i2c: qcom-cci: add msm8974 compatible
.../devicetree/bindings/i2c/i2c-qcom-cci.txt | 7 +-
.../bindings/media/qcom,msm8974-camss.yaml | 321 ++++++++++++++++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 184 ++++++++++
.../dts/qcom-msm8974pro-fairphone-fp2.dts | 70 ++++
drivers/i2c/busses/i2c-qcom-cci.c | 35 ++
drivers/media/platform/qcom/camss/Kconfig | 4 +-
.../media/platform/qcom/camss/camss-csid.c | 3 +-
.../media/platform/qcom/camss/camss-csiphy.c | 4 +-
.../media/platform/qcom/camss/camss-ispif.c | 5 +-
drivers/media/platform/qcom/camss/camss-vfe.c | 7 +-
.../media/platform/qcom/camss/camss-video.c | 17 +-
drivers/media/platform/qcom/camss/camss.c | 161 +++++++++
drivers/media/platform/qcom/camss/camss.h | 1 +
13 files changed, 801 insertions(+), 18 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/qcom,msm8974-camss.yaml
--
2.36.0
Powered by blists - more mailing lists