[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20220523164108.GA3635492@tom-ThinkPad-T14s-Gen-2i>
Date: Mon, 23 May 2022 18:41:08 +0200
From: Tommaso Merciai <tommaso.merciai@...rulasolutions.com>
To: Andrew Lunn <andrew@...n.ch>
Cc: michael@...rulasolutions.com, alberto.bianchi@...rulasolutions.com,
linux-amarula@...rulasolutions.com, linuxfancy@...glegroups.com,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] net: phy: DP83822: enable rgmii mode if
phy_interface_is_rgmii
On Mon, May 23, 2022 at 02:16:56PM +0200, Andrew Lunn wrote:
> On Mon, May 23, 2022 at 08:57:54AM +0200, Tommaso Merciai wrote:
> > On Sat, May 21, 2022 at 08:39:02PM +0200, Andrew Lunn wrote:
> > > On Sat, May 21, 2022 at 01:58:46AM +0200, Tommaso Merciai wrote:
> > > > RGMII mode can be enable from dp83822 straps, and also writing bit 9
> > > > of register 0x17 - RMII and Status Register (RCSR).
> > > > When phy_interface_is_rgmii rgmii mode must be enabled, same for
> > > > contrary, this prevents malconfigurations of hw straps
> > > >
> > > > References:
> > > > - https://www.ti.com/lit/gpn/dp83822i p66
> > > >
> > > > Signed-off-by: Tommaso Merciai <tommaso.merciai@...rulasolutions.com>
> > > > Co-developed-by: Michael Trimarchi <michael@...rulasolutions.com>
> > > > Suggested-by: Alberto Bianchi <alberto.bianchi@...rulasolutions.com>
> > > > Tested-by: Tommaso Merciai <tommaso.merciai@...rulasolutions.com>
> > >
> > > Reviewed-by: Andrew Lunn <andrew@...n.ch>
> > >
> > > If you want to, you could go further. If bit 9 is clear, bit 5 defines
> > > the mode, either RMII or MII. There are interface modes defined for
> > > these, so you could get bit 5 as well.
> >
> > Hi Andrew,
> > Thanks for the review and for your time.
> > I'll try to go further, like you suggest :)
>
> Hi Tomaso
>
> This patch has been accepted, so you will need to submit an
> incremental patch. I also expect net-next to close soon for the merge
> window, so you might want to wait two weeks before submitting.
>
> Andrew
Hi Andrew,
Thanks for the info. I'll wait for the close of the merge window
then.
Regards,
Tommaso
--
Tommaso Merciai
Embedded Linux Engineer
tommaso.merciai@...rulasolutions.com
__________________________________
Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info@...rulasolutions.com
www.amarulasolutions.com
Powered by blists - more mailing lists