| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220523165825.975628800@linuxfoundation.org>
Date: Mon, 23 May 2022 19:03:43 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Robert Richter <rrichter@....com>,
Terry Bowman <terry.bowman@....com>,
Jean Delvare <jdelvare@...e.de>,
Guenter Roeck <linux@...ck-us.net>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Mario Limonciello <Mario.Limonciello@....com>
Subject: [PATCH 5.15 014/132] Watchdog: sp5100_tco: Refactor MMIO base address initialization
From: Terry Bowman <terry.bowman@....com>
commit 1f182aca230086d4a4469c0f9136a6ea762d6385 upstream.
Combine MMIO base address and alternate base address detection. Combine
based on layout type. This will simplify the function by eliminating
a switch case.
Move existing request/release code into functions. This currently only
supports port I/O request/release. The move into a separate function
will make it ready for adding MMIO region support.
Co-developed-by: Robert Richter <rrichter@....com>
Signed-off-by: Robert Richter <rrichter@....com>
Signed-off-by: Terry Bowman <terry.bowman@....com>
Tested-by: Jean Delvare <jdelvare@...e.de>
Reviewed-by: Jean Delvare <jdelvare@...e.de>
Reviewed-by: Guenter Roeck <linux@...ck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-3-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@...ck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@...ux-watchdog.org>
Cc: Mario Limonciello <Mario.Limonciello@....com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/watchdog/sp5100_tco.c | 155 +++++++++++++++++++++---------------------
drivers/watchdog/sp5100_tco.h | 1
2 files changed, 82 insertions(+), 74 deletions(-)
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -215,6 +215,55 @@ static u32 sp5100_tco_read_pm_reg32(u8 i
return val;
}
+static u32 sp5100_tco_request_region(struct device *dev,
+ u32 mmio_addr,
+ const char *dev_name)
+{
+ if (!devm_request_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE,
+ dev_name)) {
+ dev_dbg(dev, "MMIO address 0x%08x already in use\n", mmio_addr);
+ return 0;
+ }
+
+ return mmio_addr;
+}
+
+static u32 sp5100_tco_prepare_base(struct sp5100_tco *tco,
+ u32 mmio_addr,
+ u32 alt_mmio_addr,
+ const char *dev_name)
+{
+ struct device *dev = tco->wdd.parent;
+
+ dev_dbg(dev, "Got 0x%08x from SBResource_MMIO register\n", mmio_addr);
+
+ if (!mmio_addr && !alt_mmio_addr)
+ return -ENODEV;
+
+ /* Check for MMIO address and alternate MMIO address conflicts */
+ if (mmio_addr)
+ mmio_addr = sp5100_tco_request_region(dev, mmio_addr, dev_name);
+
+ if (!mmio_addr && alt_mmio_addr)
+ mmio_addr = sp5100_tco_request_region(dev, alt_mmio_addr, dev_name);
+
+ if (!mmio_addr) {
+ dev_err(dev, "Failed to reserve MMIO or alternate MMIO region\n");
+ return -EBUSY;
+ }
+
+ tco->tcobase = devm_ioremap(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
+ if (!tco->tcobase) {
+ dev_err(dev, "MMIO address 0x%08x failed mapping\n", mmio_addr);
+ devm_release_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
+ return -ENOMEM;
+ }
+
+ dev_info(dev, "Using 0x%08x for watchdog MMIO address\n", mmio_addr);
+
+ return 0;
+}
+
static int sp5100_tco_timer_init(struct sp5100_tco *tco)
{
struct watchdog_device *wdd = &tco->wdd;
@@ -256,6 +305,7 @@ static int sp5100_tco_setupdevice(struct
struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
const char *dev_name;
u32 mmio_addr = 0, val;
+ u32 alt_mmio_addr = 0;
int ret;
/* Request the IO ports used by this driver */
@@ -274,11 +324,32 @@ static int sp5100_tco_setupdevice(struct
dev_name = SP5100_DEVNAME;
mmio_addr = sp5100_tco_read_pm_reg32(SP5100_PM_WATCHDOG_BASE) &
0xfffffff8;
+
+ /*
+ * Secondly, find the watchdog timer MMIO address
+ * from SBResource_MMIO register.
+ */
+
+ /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
+ pci_read_config_dword(sp5100_tco_pci,
+ SP5100_SB_RESOURCE_MMIO_BASE,
+ &val);
+
+ /* Verify MMIO is enabled and using bar0 */
+ if ((val & SB800_ACPI_MMIO_MASK) == SB800_ACPI_MMIO_DECODE_EN)
+ alt_mmio_addr = (val & ~0xfff) + SB800_PM_WDT_MMIO_OFFSET;
break;
case sb800:
dev_name = SB800_DEVNAME;
mmio_addr = sp5100_tco_read_pm_reg32(SB800_PM_WATCHDOG_BASE) &
0xfffffff8;
+
+ /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
+ val = sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
+
+ /* Verify MMIO is enabled and using bar0 */
+ if ((val & SB800_ACPI_MMIO_MASK) == SB800_ACPI_MMIO_DECODE_EN)
+ alt_mmio_addr = (val & ~0xfff) + SB800_PM_WDT_MMIO_OFFSET;
break;
case efch:
dev_name = SB800_DEVNAME;
@@ -297,87 +368,23 @@ static int sp5100_tco_setupdevice(struct
val = sp5100_tco_read_pm_reg8(EFCH_PM_DECODEEN);
if (val & EFCH_PM_DECODEEN_WDT_TMREN)
mmio_addr = EFCH_PM_WDT_ADDR;
+
+ val = sp5100_tco_read_pm_reg8(EFCH_PM_ISACONTROL);
+ if (val & EFCH_PM_ISACONTROL_MMIOEN)
+ alt_mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
+ EFCH_PM_ACPI_MMIO_WDT_OFFSET;
break;
default:
return -ENODEV;
}
- /* Check MMIO address conflict */
- if (!mmio_addr ||
- !devm_request_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE,
- dev_name)) {
- if (mmio_addr)
- dev_dbg(dev, "MMIO address 0x%08x already in use\n",
- mmio_addr);
- switch (tco->tco_reg_layout) {
- case sp5100:
- /*
- * Secondly, Find the watchdog timer MMIO address
- * from SBResource_MMIO register.
- */
- /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
- pci_read_config_dword(sp5100_tco_pci,
- SP5100_SB_RESOURCE_MMIO_BASE,
- &mmio_addr);
- if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN |
- SB800_ACPI_MMIO_SEL)) !=
- SB800_ACPI_MMIO_DECODE_EN) {
- ret = -ENODEV;
- goto unreg_region;
- }
- mmio_addr &= ~0xFFF;
- mmio_addr += SB800_PM_WDT_MMIO_OFFSET;
- break;
- case sb800:
- /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
- mmio_addr =
- sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
- if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN |
- SB800_ACPI_MMIO_SEL)) !=
- SB800_ACPI_MMIO_DECODE_EN) {
- ret = -ENODEV;
- goto unreg_region;
- }
- mmio_addr &= ~0xFFF;
- mmio_addr += SB800_PM_WDT_MMIO_OFFSET;
- break;
- case efch:
- val = sp5100_tco_read_pm_reg8(EFCH_PM_ISACONTROL);
- if (!(val & EFCH_PM_ISACONTROL_MMIOEN)) {
- ret = -ENODEV;
- goto unreg_region;
- }
- mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
- EFCH_PM_ACPI_MMIO_WDT_OFFSET;
- break;
- }
- dev_dbg(dev, "Got 0x%08x from SBResource_MMIO register\n",
- mmio_addr);
- if (!devm_request_mem_region(dev, mmio_addr,
- SP5100_WDT_MEM_MAP_SIZE,
- dev_name)) {
- dev_dbg(dev, "MMIO address 0x%08x already in use\n",
- mmio_addr);
- ret = -EBUSY;
- goto unreg_region;
- }
+ ret = sp5100_tco_prepare_base(tco, mmio_addr, alt_mmio_addr, dev_name);
+ if (!ret) {
+ /* Setup the watchdog timer */
+ tco_timer_enable(tco);
+ ret = sp5100_tco_timer_init(tco);
}
- tco->tcobase = devm_ioremap(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
- if (!tco->tcobase) {
- dev_err(dev, "failed to get tcobase address\n");
- ret = -ENOMEM;
- goto unreg_region;
- }
-
- dev_info(dev, "Using 0x%08x for watchdog MMIO address\n", mmio_addr);
-
- /* Setup the watchdog timer */
- tco_timer_enable(tco);
-
- ret = sp5100_tco_timer_init(tco);
-
-unreg_region:
release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
return ret;
}
--- a/drivers/watchdog/sp5100_tco.h
+++ b/drivers/watchdog/sp5100_tco.h
@@ -58,6 +58,7 @@
#define SB800_PM_WATCHDOG_SECOND_RES GENMASK(1, 0)
#define SB800_ACPI_MMIO_DECODE_EN BIT(0)
#define SB800_ACPI_MMIO_SEL BIT(1)
+#define SB800_ACPI_MMIO_MASK GENMASK(1, 0)
#define SB800_PM_WDT_MMIO_OFFSET 0xB00
Powered by blists - more mailing lists