linux-kernel - Re: [PATCH v2 1/2] dt-bindings: HID: i2c-hid: elan: Introduce bindings for Elan eKTH6915

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAD=FV=Urdfkzz6h4X-5tKvjFaT6eRTNP47s+evkjYaCEfq-Ndg@mail.gmail.com>
Date:   Mon, 23 May 2022 16:35:23 -0700
From:   Doug Anderson <dianders@...omium.org>
To:     Jiri Kosina <jikos@...nel.org>,
        Benjamin Tissoires <benjamin.tissoires@...hat.com>,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc:     "open list:HID CORE LAYER" <linux-input@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>, Stephen Boyd <swboyd@...omium.org>,
        Matthias Kaehlcke <mka@...omium.org>,
        LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 1/2] dt-bindings: HID: i2c-hid: elan: Introduce
 bindings for Elan eKTH6915

Hi,

On Mon, May 23, 2022 at 2:23 PM Douglas Anderson <dianders@...omium.org> wrote:
>
> Like many i2c-hid touchscreen controllers, the Elan eKTH6915
> controller has a reset gpio. For the Goodix GT7375P touchscreen the
> decision was to add a new binding rather than trying to add a new GPIO
> to the existing i2c-hid binding. We'll follow the lead and do it here,
> too.
>
> SIDE NOTE: the Elan eKTH6915 is a touchscreen _controller_ that's
> included as a part on some touchscreens. The reset line isn't truly
> necessary for the functioning of the touchscreen, so it's possible
> that some designs won't have it hooked up and will just guarantee the
> power sequencing requirements with RLC circuits. Thus, we'll mark the
> reset gpio as optional.
>
> Note that if the reset GPIO isn't used there's actually no true need
> to use the "elan,ekth6915" compatible instead of the "hid-over-i2c" on
> Linux. However:
> - Officially using just "hid-over-i2c" for this device violates the
>   existing "hid-over-i2c" bindings. The bindings say that you're not
>   supposed to use "post-power-on-delay-ms" without specifying a more
>   specific compatible. Currently the Linux driver doesn't enforce
>   this, but it violates the bindings to just use
>   "hid-over-i2c". ...and if you're going to add a more specific
>   compatible anyway, might as well do it right.
> - Using this compatible means we don't need to specify
>   "hid-descr-addr" since it's inferred from the compatible.
> - Using this compatible means that the regulator names match the names
>   on the Elan datasheet (vcc33 / vccio) vs the generic hid-over-i2c
>   (vdd / vddl).
>
> Signed-off-by: Douglas Anderson <dianders@...omium.org>

Failure on my part. I should have carried forward from v1:

Reviewed-by: Dmitry Torokhov <dmitry.torokhov@...il.com>