linux-kernel - Re: [PATCH v3] net: phy: DP83822: enable rgmii mode if phy_interface_is

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 23 May 2022 08:57:54 +0200
From:   Tommaso Merciai <tommaso.merciai@...rulasolutions.com>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     michael@...rulasolutions.com, alberto.bianchi@...rulasolutions.com,
        linux-amarula@...rulasolutions.com, linuxfancy@...glegroups.com,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] net: phy: DP83822: enable rgmii mode if
 phy_interface_is_rgmii

On Sat, May 21, 2022 at 08:39:02PM +0200, Andrew Lunn wrote:
> On Sat, May 21, 2022 at 01:58:46AM +0200, Tommaso Merciai wrote:
> > RGMII mode can be enable from dp83822 straps, and also writing bit 9
> > of register 0x17 - RMII and Status Register (RCSR).
> > When phy_interface_is_rgmii rgmii mode must be enabled, same for
> > contrary, this prevents malconfigurations of hw straps
> > 
> > References:
> >  - https://www.ti.com/lit/gpn/dp83822i p66
> > 
> > Signed-off-by: Tommaso Merciai <tommaso.merciai@...rulasolutions.com>
> > Co-developed-by: Michael Trimarchi <michael@...rulasolutions.com>
> > Suggested-by: Alberto Bianchi <alberto.bianchi@...rulasolutions.com>
> > Tested-by: Tommaso Merciai <tommaso.merciai@...rulasolutions.com>
> 
> Reviewed-by: Andrew Lunn <andrew@...n.ch>
> 
> If you want to, you could go further. If bit 9 is clear, bit 5 defines
> the mode, either RMII or MII. There are interface modes defined for
> these, so you could get bit 5 as well.

Hi Andrew,
Thanks for the review and for your time.
I'll try to go further, like you suggest :)

Regards,
Tommaso

> 
>     Andrew

-- 
Tommaso Merciai
Embedded Linux Engineer
tommaso.merciai@...rulasolutions.com
__________________________________

Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info@...rulasolutions.com
www.amarulasolutions.com