linux-kernel - [PATCH 2/3] firmware: xilinx: Add pm api function for PL readback

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220524094745.287002-3-nava.manne@xilinx.com>
Date:   Tue, 24 May 2022 15:17:44 +0530
From:   Nava kishore Manne <nava.manne@...inx.com>
To:     <michal.simek@...inx.com>, <mdf@...nel.org>, <hao.wu@...el.com>,
        <yilun.xu@...el.com>, <trix@...hat.com>,
        <gregkh@...uxfoundation.org>, <ronak.jain@...inx.com>,
        <abhyuday.godhasara@...inx.com>, <rajan.vaja@...inx.com>,
        <nava.manne@...inx.com>, <lakshmi.sai.krishna.potthuri@...inx.com>,
        <piyush.mehta@...inx.com>, <harsha.harsha@...inx.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <linux-fpga@...r.kernel.org>,
        <git@...inx.com>
Subject: [PATCH 2/3] firmware: xilinx: Add pm api function for PL readback

Adds PM API for performing PL configuration readback.
It provides an interface to the pmufw to readback the
FPGA configuration registers as well as configuration
data.

For more detailed info related to the configuration
registers and configuration data refer ug570.

Signed-off-by: Nava kishore Manne <nava.manne@...inx.com>
---
 drivers/firmware/xilinx/zynqmp.c     | 33 ++++++++++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h | 14 ++++++++++++
 2 files changed, 47 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 7977a494a651..40b99299b662 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -927,6 +927,39 @@ int zynqmp_pm_fpga_get_status(u32 *value)
 }
 EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_status);
 
+/**
+ * zynqmp_pm_fpga_read - Perform the fpga configuration readback
+ * @reg_numframes: Configuration register offset (or) Number of frames to read
+ * @phys_address: Physical Address of the buffer
+ * @readback_type: Type of fpga readback operation
+ *                 0 - FPGA configuration register readback
+ *                 1 - FPGA configuration data readback
+ * @value: Value to read
+ *
+ * This function provides access to xilfpga library to perform
+ * fpga configuration readback.
+ *
+ * Return:	Returns status, either success or error+reason
+ */
+int zynqmp_pm_fpga_read(const u32 reg_numframes, const phys_addr_t phys_address,
+			bool readback_type, u32 *value)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	if (!value)
+		return -EINVAL;
+
+	ret = zynqmp_pm_invoke_fn(PM_FPGA_READ, reg_numframes,
+				  lower_32_bits(phys_address),
+				  upper_32_bits(phys_address), readback_type,
+				  ret_payload);
+	*value = ret_payload[1];
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_read);
+
 /**
  * zynqmp_pm_pinctrl_request - Request Pin from firmware
  * @pin: Pin number to request
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 1ec73d5352c3..7dc4981345dc 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -61,6 +61,10 @@
 #define PM_LOAD_PDI	0x701
 #define PDI_SRC_DDR	0xF
 
+/* FPGA readback type */
+#define PM_FPGA_READ_CONFIG_REG		0x0U
+#define PM_FPGA_READ_CONFIG_DATA	0x1U
+
 /*
  * Firmware FPGA Manager flags
  * XILINX_ZYNQMP_PM_FPGA_FULL:	FPGA full reconfiguration
@@ -116,6 +120,7 @@ enum pm_api_id {
 	PM_CLOCK_GETRATE = 42,
 	PM_CLOCK_SETPARENT = 43,
 	PM_CLOCK_GETPARENT = 44,
+	PM_FPGA_READ = 46,
 	PM_SECURE_AES = 47,
 	PM_FEATURE_CHECK = 63,
 };
@@ -468,6 +473,8 @@ int zynqmp_pm_feature(const u32 api_id);
 int zynqmp_pm_is_function_supported(const u32 api_id, const u32 id);
 int zynqmp_pm_set_feature_config(enum pm_feature_config_id id, u32 value);
 int zynqmp_pm_get_feature_config(enum pm_feature_config_id id, u32 *payload);
+int zynqmp_pm_fpga_read(const u32 reg_numframes, const phys_addr_t phys_address,
+			bool readback_type, u32 *value);
 #else
 static inline int zynqmp_pm_get_api_version(u32 *version)
 {
@@ -733,6 +740,13 @@ static inline int zynqmp_pm_get_feature_config(enum pm_feature_config_id id,
 {
 	return -ENODEV;
 }
+
+static int zynqmp_pm_fpga_read(const u32 reg_numframes,
+			       const phys_addr_t phys_address,
+			       bool readback_type, u32 *value);
+{
+	return -ENODEV;
+}
 #endif
 
 #endif /* __FIRMWARE_ZYNQMP_H__ */
-- 
2.25.1