linux-kernel - Re: [PATCH v17 4/5] usb: dwc3: qcom: Configure wakeup interrupts during suspend

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220524103126.GJ15121@hu-pkondeti-hyd.qualcomm.com>
Date:   Tue, 24 May 2022 16:01:26 +0530
From:   Pavan Kondeti <quic_pkondeti@...cinc.com>
To:     Krishna Kurapati <quic_kriskura@...cinc.com>
CC:     Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Felipe Balbi <balbi@...nel.org>,
        Stephen Boyd <swboyd@...omium.org>,
        Doug Anderson <dianders@...omium.org>,
        "Matthias Kaehlcke" <mka@...omium.org>,
        Mathias Nyman <mathias.nyman@...el.com>,
        <devicetree@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
        <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-pm@...r.kernel.org>, <quic_pkondeti@...cinc.com>,
        <quic_ppratap@...cinc.com>, <quic_vpulyala@...cinc.com>,
        Sandeep Maheswaram <quic_c_sanm@...cinc.com>
Subject: Re: [PATCH v17 4/5] usb: dwc3: qcom: Configure wakeup interrupts
 during suspend

Hi Krishna,

On Tue, May 24, 2022 at 03:43:47PM +0530, Krishna Kurapati wrote:
> From: Sandeep Maheswaram <quic_c_sanm@...cinc.com>
> 
> Configure DP/DM line interrupts based on the USB2 device attached to
> the root hub port. When HS/FS device is connected, configure the DP line
> as falling edge to detect both disconnect and remote wakeup scenarios. When
> LS device is connected, configure DM line as falling edge to detect both
> disconnect and remote wakeup. When no device is connected, configure both
> DP and DM lines as rising edge to detect HS/HS/LS device connect scenario.
> 
> Signed-off-by: Sandeep Maheswaram <quic_c_sanm@...cinc.com>
> Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
> Signed-off-by: Krishna Kurapati <quic_kriskura@...cinc.com>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 74 ++++++++++++++++++++++++++++++++++++++------
>  1 file changed, 65 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 7352124..5d5db62 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -20,7 +20,8 @@
>  #include <linux/usb/of.h>
>  #include <linux/reset.h>
>  #include <linux/iopoll.h>
> -
> +#include <linux/usb/hcd.h>
> +#include <linux/usb.h>
>  #include "core.h"
>  
>  /* USB QSCRATCH Hardware registers */
> @@ -296,11 +297,37 @@ static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
>  	icc_put(qcom->icc_path_apps);
>  }
>  
> -static void dwc3_qcom_enable_wakeup_irq(int irq)
> +enum usb_device_speed dwc3_qcom_update_usb2_speed(struct dwc3_qcom *qcom)
> +{
> +	struct dwc3	*dwc = platform_get_drvdata(qcom->dwc3);
> +	struct usb_hcd	*hcd = platform_get_drvdata(dwc->xhci);
> +	struct usb_device *udev;
> +	enum usb_device_speed usb2_speed;
> +
> +	/*
> +	 * It is possible to query the speed of all children of
> +	 * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code
> +	 * currently supports only 1 port per controller. So
> +	 * this is sufficient.
> +	 */
> +	udev = usb_hub_find_child(hcd->self.root_hub, 1);
> +
> +	if (udev)
> +		usb2_speed = udev->speed;
> +	else
> +		usb2_speed = USB_SPEED_UNKNOWN;
> +
> +	return usb2_speed;
> +}
> +

Can you rename this function since we are not updating anything here.

%s/dwc3_qcom_update_usb2_speed/dwc3_qcom_get_usb2_speed

> +static void dwc3_qcom_enable_wakeup_irq(int irq, unsigned int polarity)
>  {
>  	if (!irq)
>  		return;
>  
> +	if (polarity)
> +		irq_set_irq_type(irq, polarity);
> +
>  	enable_irq(irq);
>  	enable_irq_wake(irq);
>  }
> @@ -316,24 +343,53 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
>  
>  static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
>  {
> -	dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
> +	enum usb_device_speed usb2_speed = dwc3_qcom_update_usb2_speed(qcom);

I am sorry for misleading you on this. Looks like caching usb2_speed
in suspend routine dwc3_qcom struct has a benefit. Can we please change to
your previous patch-set style?

Thanks,
Pavan