lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 24 May 2022 06:48:25 -0700
From:   Guenter Roeck <linux@...ck-us.net>
To:     Sibi Sankar <quic_sibis@...cinc.com>
Cc:     bjorn.andersson@...aro.org, mani@...nel.org,
        jassisinghbrar@...il.com, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, agross@...nel.org,
        Prasad Sodagudi <quic_psodagud@...cinc.com>
Subject: Re: [PATCH v3] mailbox: qcom-ipcc: Log the pending interrupt during
 resume

On Tue, May 17, 2022 at 04:13:00PM +0530, Sibi Sankar wrote:
> From: Prasad Sodagudi <quic_psodagud@...cinc.com>
> 
> Enable logging of the pending interrupt that triggered device wakeup. This
> logging information helps to debug IRQs that cause periodic device wakeups
> by printing the detailed information of pending IPCC interrupts.
> 
> Scenario: Device wakeup caused by Modem crash
> Logs:
> qcom-ipcc mailbox: virq: 182 triggered client-id: 2; signal-id: 2
> 
> >From the IPCC bindings it can further be understood that the client here is
> IPCC_CLIENT_MPSS and the signal was IPCC_MPROC_SIGNAL_SMP2P.
> 
> Reviewed-by: Manivannan Sadhasivam <mani@...nel.org>
> Signed-off-by: Prasad Sodagudi <quic_psodagud@...cinc.com>
> Signed-off-by: Sibi Sankar <quic_sibis@...cinc.com>
> ---
> 
> V3:
>  * Use pm_sleep_ptr and convert info to dbg [Mani]

Unfortunately, this results in

drivers/mailbox/qcom-ipcc.c:258:12: error: 'qcom_ipcc_pm_resume' defined but not used

on builds with PM disabled, as seen in next-20220524.

Guenter

>  * Fixup commit message
> 
> V2:
>  * Fix build error when ipcc is a module [Kernel Test Bot]
> 
>  drivers/mailbox/qcom-ipcc.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/drivers/mailbox/qcom-ipcc.c b/drivers/mailbox/qcom-ipcc.c
> index c5d963222014..5a42bc2a1083 100644
> --- a/drivers/mailbox/qcom-ipcc.c
> +++ b/drivers/mailbox/qcom-ipcc.c
> @@ -254,6 +254,24 @@ static int qcom_ipcc_setup_mbox(struct qcom_ipcc *ipcc,
>  	return devm_mbox_controller_register(dev, mbox);
>  }
>  
> +static int qcom_ipcc_pm_resume(struct device *dev)
> +{
> +	struct qcom_ipcc *ipcc = dev_get_drvdata(dev);
> +	u32 hwirq;
> +	int virq;
> +
> +	hwirq = readl(ipcc->base + IPCC_REG_RECV_ID);
> +	if (hwirq == IPCC_NO_PENDING_IRQ)
> +		return 0;
> +
> +	virq = irq_find_mapping(ipcc->irq_domain, hwirq);
> +
> +	dev_dbg(dev, "virq: %d triggered client-id: %ld; signal-id: %ld\n", virq,
> +		FIELD_GET(IPCC_CLIENT_ID_MASK, hwirq), FIELD_GET(IPCC_SIGNAL_ID_MASK, hwirq));
> +
> +	return 0;
> +}
> +
>  static int qcom_ipcc_probe(struct platform_device *pdev)
>  {
>  	struct qcom_ipcc *ipcc;
> @@ -324,6 +342,10 @@ static const struct of_device_id qcom_ipcc_of_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, qcom_ipcc_of_match);
>  
> +static const struct dev_pm_ops qcom_ipcc_dev_pm_ops = {
> +	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, qcom_ipcc_pm_resume)
> +};
> +
>  static struct platform_driver qcom_ipcc_driver = {
>  	.probe = qcom_ipcc_probe,
>  	.remove = qcom_ipcc_remove,
> @@ -331,6 +353,7 @@ static struct platform_driver qcom_ipcc_driver = {
>  		.name = "qcom-ipcc",
>  		.of_match_table = qcom_ipcc_of_match,
>  		.suppress_bind_attrs = true,
> +		.pm = pm_sleep_ptr(&qcom_ipcc_dev_pm_ops),
>  	},
>  };
>  
> -- 
> 2.7.4
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ