[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220525032341.3182-2-warp5tw@gmail.com>
Date: Wed, 25 May 2022 11:23:37 +0800
From: Tyrone Ting <warp5tw@...il.com>
To: avifishman70@...il.com, tmaimon77@...il.com, tali.perry1@...il.com,
venture@...gle.com, yuenn@...gle.com, benjaminfair@...gle.com,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
wsa@...nel.org, andriy.shevchenko@...ux.intel.com,
jarkko.nikula@...ux.intel.com, semen.protsenko@...aro.org,
jie.deng@...el.com, jsd@...ihalf.com, sven@...npeter.dev,
lukas.bulwahn@...il.com, olof@...om.net, arnd@...db.de,
warp5tw@...il.com, tali.perry@...oton.com, Avi.Fishman@...oton.com,
tomer.maimon@...oton.com, KWLIU@...oton.com, JJLIU0@...oton.com,
kfting@...oton.com
Cc: openbmc@...ts.ozlabs.org, linux-i2c@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v6 1/5] dt-bindings: i2c: npcm: support NPCM845
From: Tyrone Ting <kfting@...oton.com>
Add compatible and nuvoton,sys-mgr description for NPCM i2c module.
Signed-off-by: Tyrone Ting <kfting@...oton.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Reviewed-by: Rob Herring <robh@...nel.org>
---
.../bindings/i2c/nuvoton,npcm7xx-i2c.yaml | 25 +++++++++++++++----
1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
index 128444942aec..09d2591e1fa3 100644
--- a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
@@ -7,17 +7,18 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
description: |
- The NPCM750x includes sixteen I2C bus controllers. All Controllers support
- both master and slave mode. Each controller can switch between master and slave
- at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
- RX.
+ I2C bus controllers of the NPCM series support both master and
+ slave mode. Each controller can switch between master and slave at run time
+ (i.e. IPMB mode). HW FIFO for TX and RX are supported.
maintainers:
- Tali Perry <tali.perry1@...il.com>
properties:
compatible:
- const: nuvoton,npcm750-i2c
+ enum:
+ - nuvoton,npcm750-i2c
+ - nuvoton,npcm845-i2c
reg:
maxItems: 1
@@ -36,6 +37,10 @@ properties:
default: 100000
enum: [100000, 400000, 1000000]
+ nuvoton,sys-mgr:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle of system manager register node.
+
required:
- compatible
- reg
@@ -44,6 +49,15 @@ required:
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nuvoton,npcm845-i2c
+
+ then:
+ required:
+ - nuvoton,sys-mgr
unevaluatedProperties: false
@@ -57,6 +71,7 @@ examples:
clock-frequency = <100000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
compatible = "nuvoton,npcm750-i2c";
+ nuvoton,sys-mgr = <&gcr>;
};
...
--
2.17.1
Powered by blists - more mailing lists