linux-kernel - [PATCH V4 2/6] iio: accel: bmi088: Make it possible to config scales

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220525130828.2394919-3-Qing-wu.Li@leica-geosystems.com.cn>
Date:   Wed, 25 May 2022 13:08:24 +0000
From:   LI Qingwu <Qing-wu.Li@...ca-geosystems.com.cn>
To:     jic23@...nel.org, lars@...afoo.de, mchehab+huawei@...nel.org,
        ardeleanalex@...il.com, linux-iio@...r.kernel.org,
        linux-kernel@...r.kernel.org, Qing-wu.Li@...ca-geosystems.com.cn,
        robh+dt@...nel.org, mike.looijmans@...ic.nl,
        devicetree@...r.kernel.org
Cc:     thomas.haemmerle@...ca-geosystems.com
Subject: [PATCH V4 2/6] iio: accel: bmi088: Make it possible to config scales

The sensor can set the scales by writing the range register 0x41,
The current driver has no interface to configure it.
The commit adds the interface for config the scales.

Reviewed-by: Alexandru Ardelean <ardeleanalex@...il.com>
Signed-off-by: LI Qingwu <Qing-wu.Li@...ca-geosystems.com.cn>
---
 drivers/iio/accel/bmi088-accel-core.c | 33 ++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/accel/bmi088-accel-core.c b/drivers/iio/accel/bmi088-accel-core.c
index 3f38967c5a0a..16c95d90f829 100644
--- a/drivers/iio/accel/bmi088-accel-core.c
+++ b/drivers/iio/accel/bmi088-accel-core.c
@@ -239,6 +239,21 @@ static int bmi088_accel_set_sample_freq(struct bmi088_accel_data *data, int val)
 				  BMI088_ACCEL_MODE_ODR_MASK, regval);
 }
 
+static int bmi088_accel_set_scale(struct bmi088_accel_data *data, int val, int val2)
+{
+	unsigned int i;
+
+	for (i = 0; i < 4; i++)
+		if (val  == data->chip_info->scale_table[i][0] &&
+		    val2 == data->chip_info->scale_table[i][1])
+			break;
+
+	if (i == 4)
+		return -EINVAL;
+
+	return regmap_write(data->regmap, BMI088_ACCEL_REG_ACC_RANGE, i);
+}
+
 static int bmi088_accel_get_temp(struct bmi088_accel_data *data, int *val)
 {
 	int ret;
@@ -372,7 +387,13 @@ static int bmi088_accel_read_avail(struct iio_dev *indio_dev,
 			     const int **vals, int *type, int *length,
 			     long mask)
 {
+	struct bmi088_accel_data *data = iio_priv(indio_dev);
 	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		*vals = (const int *)data->chip_info->scale_table;
+		*length = 8;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		return IIO_AVAIL_LIST;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		*type = IIO_VAL_INT_PLUS_MICRO;
 		*vals = bmi088_sample_freqs;
@@ -392,6 +413,15 @@ static int bmi088_accel_write_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		ret = pm_runtime_resume_and_get(dev);
+		if (ret)
+			return ret;
+
+		ret = bmi088_accel_set_scale(data, val, val2);
+		pm_runtime_mark_last_busy(dev);
+		pm_runtime_put_autosuspend(dev);
+		return ret;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		ret = pm_runtime_resume_and_get(dev);
 		if (ret)
@@ -413,7 +443,8 @@ static int bmi088_accel_write_raw(struct iio_dev *indio_dev,
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
 				BIT(IIO_CHAN_INFO_SAMP_FREQ), \
-	.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+				BIT(IIO_CHAN_INFO_SCALE), \
 	.scan_index = AXIS_##_axis, \
 }
 
-- 
2.25.1