| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220525142019.3615253-2-m.felsch@pengutronix.de>
Date: Wed, 25 May 2022 16:20:20 +0200
From: Marco Felsch <m.felsch@...gutronix.de>
To: p.zabel@...gutronix.de, robh+dt@...nel.org, krzk+dt@...nel.org
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
kernel@...gutronix.de, Marco Felsch <m.felsch@...gutronix.de>
Subject: [PATCH 2/2] reset: tps380x: Add TPS380x device driver supprt
The TI TPS380x family [1] is a volatage supervisor with a dedicated
manual reset (mr) line input and a reset output. The chip(s) have a
build in reset delay, depending on the chip partnumber. This simple
driver addresses this so the cosumer don't need to care about it.
[1] https://www.ti.com/product/TPS3801
Signed-off-by: Marco Felsch <m.felsch@...gutronix.de>
---
drivers/reset/Kconfig | 8 +++
drivers/reset/Makefile | 1 +
drivers/reset/reset-tps380x.c | 130 ++++++++++++++++++++++++++++++++++
3 files changed, 139 insertions(+)
create mode 100644 drivers/reset/reset-tps380x.c
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index e0fc80e041ea..e2eb616af812 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -256,6 +256,14 @@ config RESET_TI_SYSCON
you wish to use the reset framework for such memory-mapped devices,
say Y here. Otherwise, say N.
+config RESET_TI_TPS380X
+ tristate "TI TPS380x Reset Driver"
+ select GPIOLIB
+ help
+ This enables the reset driver support for TI TPS380x devices. If
+ you wish to use the reset framework for such devices, say Y here.
+ Otherwise, say N.
+
config RESET_TN48M_CPLD
tristate "Delta Networks TN48M switch CPLD reset controller"
depends on MFD_TN48M_CPLD || COMPILE_TEST
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index a80a9c4008a7..66399b92b1bb 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
+obj-$(CONFIG_RESET_TI_TPS380X) += reset-tps380x.o
obj-$(CONFIG_RESET_TN48M_CPLD) += reset-tn48m.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
obj-$(CONFIG_RESET_UNIPHIER_GLUE) += reset-uniphier-glue.o
diff --git a/drivers/reset/reset-tps380x.c b/drivers/reset/reset-tps380x.c
new file mode 100644
index 000000000000..fd2c0929ae2d
--- /dev/null
+++ b/drivers/reset/reset-tps380x.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TI TPS380x Supply Voltage Supervisor and Reset Controller Driver
+ *
+ * Copyright (C) 2022 Pengutronix, Marco Felsch <kernel@...gutronix.de>
+ *
+ * Based on Simple Reset Controller Driver
+ *
+ * Copyright (C) 2017 Pengutronix, Philipp Zabel <kernel@...gutronix.de>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/reset-controller.h>
+
+struct tps380x_reset {
+ struct reset_controller_dev rcdev;
+ struct gpio_desc *reset_gpio;
+ unsigned int reset_ms;
+};
+
+struct tps380x_reset_devdata {
+ unsigned int min_reset_ms;
+ unsigned int typ_reset_ms;
+ unsigned int max_reset_ms;
+};
+
+static inline
+struct tps380x_reset *to_tps380x_reset(struct reset_controller_dev *rcdev)
+{
+ return container_of(rcdev, struct tps380x_reset, rcdev);
+}
+
+static int
+tps380x_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct tps380x_reset *tps380x = to_tps380x_reset(rcdev);
+
+ gpiod_set_value_cansleep(tps380x->reset_gpio, 1);
+
+ return 0;
+}
+
+static int
+tps380x_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct tps380x_reset *tps380x = to_tps380x_reset(rcdev);
+
+ gpiod_set_value_cansleep(tps380x->reset_gpio, 0);
+ msleep(tps380x->reset_ms);
+
+ return 0;
+}
+
+const struct reset_control_ops reset_tps380x_ops = {
+ .assert = tps380x_reset_assert,
+ .deassert = tps380x_reset_deassert,
+};
+
+static int tps380x_reset_of_xlate(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec)
+{
+ /* No special handling needed, we have only one reset line per device */
+ return 0;
+}
+
+static int tps380x_reset_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct tps380x_reset_devdata *devdata;
+ struct tps380x_reset *tps380x;
+
+ devdata = device_get_match_data(dev);
+ if (!devdata)
+ return -EINVAL;
+
+ tps380x = devm_kzalloc(dev, sizeof(*tps380x), GFP_KERNEL);
+ if (!tps380x)
+ return -ENOMEM;
+
+ tps380x->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(tps380x->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(tps380x->reset_gpio),
+ "Failed to get GPIO\n");
+
+ /*
+ * Todo:
+ * Add firmware handling to switch between min/typ/max reset time
+ */
+ tps380x->reset_ms = devdata->max_reset_ms;
+
+ tps380x->rcdev.ops = &reset_tps380x_ops;
+ tps380x->rcdev.owner = THIS_MODULE;
+ tps380x->rcdev.dev = dev;
+ tps380x->rcdev.of_node = dev->of_node;
+ tps380x->rcdev.of_reset_n_cells = 0;
+ tps380x->rcdev.of_xlate = tps380x_reset_of_xlate;
+ tps380x->rcdev.nr_resets = 1;
+
+ return devm_reset_controller_register(dev, &tps380x->rcdev);
+}
+
+static const struct tps380x_reset_devdata tps3801_reset_data = {
+ .min_reset_ms = 120,
+ .typ_reset_ms = 200,
+ .max_reset_ms = 280,
+};
+
+static const struct of_device_id tps380x_reset_dt_ids[] = {
+ { .compatible = "ti,tps3801", .data = &tps3801_reset_data },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, tps380x_reset_dt_ids);
+
+static struct platform_driver tps380x_reset_driver = {
+ .probe = tps380x_reset_probe,
+ .driver = {
+ .name = "tps380x-reset",
+ .of_match_table = tps380x_reset_dt_ids,
+ },
+};
+module_platform_driver(tps380x_reset_driver);
+
+MODULE_AUTHOR("Marco Felsch <kernel@...gutronix.de>");
+MODULE_DESCRIPTION("TI TPS380x Supply Voltags Supervisor and Reset Driver");
+MODULE_LICENSE("GPL v2");
--
2.30.2
Powered by blists - more mailing lists