| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220525144404.200390-6-luca.weiss@fairphone.com>
Date: Wed, 25 May 2022 16:44:01 +0200
From: Luca Weiss <luca.weiss@...rphone.com>
To: linux-arm-msm@...r.kernel.org
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
Luca Weiss <luca.weiss@...rphone.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 5/5] arm64: dts: qcom: sm6350: Add interconnect support
Add all the different NoC providers that are found in SM6350 and
populate different nodes that use the interconnect properties.
Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
---
Changes since v2:
* none
arch/arm64/boot/dts/qcom/sm6350.dtsi | 109 +++++++++++++++++++++++++++
1 file changed, 109 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index fb1a0f662575..119073f19285 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1,11 +1,13 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@...ainline.org>
+ * Copyright (c) 2022, Luca Weiss <luca.weiss@...rphone.com>
*/
#include <dt-bindings/clock/qcom,gcc-sm6350.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,sm6350.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
@@ -539,6 +541,10 @@ i2c0: i2c@...000 {
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -552,6 +558,10 @@ i2c2: i2c@...000 {
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
};
@@ -578,6 +588,10 @@ i2c6: i2c@...000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -591,6 +605,10 @@ i2c7: i2c@...000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -604,6 +622,10 @@ i2c8: i2c@...000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
@@ -615,6 +637,9 @@ uart9: serial@...000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+ interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
@@ -628,11 +653,62 @@ i2c10: i2c@...000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
};
+ config_noc: interconnect@...0000 {
+ compatible = "qcom,sm6350-config-noc";
+ reg = <0 0x01500000 0 0x28000>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@...0000 {
+ compatible = "qcom,sm6350-system-noc";
+ reg = <0 0x01620000 0 0x17080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ clk_virt: interconnect-clk-virt {
+ compatible = "qcom,sm6350-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+ };
+
+ aggre1_noc: interconnect@...0000 {
+ compatible = "qcom,sm6350-aggre1-noc";
+ reg = <0 0x016e0000 0 0x15080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre2_noc: interconnect@...0000 {
+ compatible = "qcom,sm6350-aggre2-noc";
+ reg = <0 0x01700000 0 0x1f880>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ compute_noc: interconnect-compute-noc {
+ compatible = "qcom,sm6350-compute-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+ };
+
+ mmss_noc: interconnect@...0000 {
+ compatible = "qcom,sm6350-mmss-noc";
+ reg = <0 0x01740000 0 0x1c100>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
ufs_mem_hc: ufs@...4000 {
compatible = "qcom,sm6350-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
@@ -933,6 +1009,10 @@ sdhc_2: sdhci@...4000 {
<&gcc GCC_SDCC2_APPS_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "core", "xo";
+ interconnects = <&aggre2_noc MASTER_SDCC_2 0 &clk_virt SLAVE_EBI_CH0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>;
+ interconnect-names = "sdhc-ddr", "cpu-sdhc";
+
qcom,dll-config = <0x0007642c>;
qcom,ddr-config = <0x80040868>;
power-domains = <&rpmhpd 0>;
@@ -947,11 +1027,15 @@ sdhc2_opp_table: sdhc2-opp-table {
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
+ opp-peak-kBps = <790000 131000>;
+ opp-avg-kBps = <50000 50000>;
};
opp-202000000 {
opp-hz = /bits/ 64 <202000000>;
required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <3190000 294000>;
+ opp-avg-kBps = <261438 300000>;
};
};
};
@@ -1017,12 +1101,33 @@ dp_phy: dp-phy@...a200 {
};
};
+ dc_noc: interconnect@...0000 {
+ compatible = "qcom,sm6350-dc-noc";
+ reg = <0 0x09160000 0 0x3200>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
system-cache-controller@...0000 {
compatible = "qcom,sm6350-llcc";
reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
reg-names = "llcc_base", "llcc_broadcast_base";
};
+ gem_noc: interconnect@...0000 {
+ compatible = "qcom,sm6350-gem-noc";
+ reg = <0 0x09680000 0 0x3e200>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ npu_noc: interconnect@...0000 {
+ compatible = "qcom,sm6350-npu-noc";
+ reg = <0 0x09990000 0 0x1600>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
usb_1: usb@...8800 {
compatible = "qcom,sm6350-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
@@ -1051,6 +1156,10 @@ usb_1: usb@...8800 {
resets = <&gcc GCC_USB30_PRIM_BCR>;
+ interconnects = <&aggre2_noc MASTER_USB3 0 &clk_virt SLAVE_EBI_CH0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
usb_1_dwc3: usb@...0000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
--
2.36.1
Powered by blists - more mailing lists