| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220526010111.755166-1-davidgow@google.com>
Date: Wed, 25 May 2022 18:01:11 -0700
From: David Gow <davidgow@...gle.com>
To: Vincent Whitchurch <vincent.whitchurch@...s.com>,
Johannes Berg <johannes@...solutions.net>,
Patricia Alfonso <trishalfonso@...gle.com>,
Jeff Dike <jdike@...toit.com>,
Richard Weinberger <richard@....at>,
anton.ivanov@...bridgegreys.com,
Dmitry Vyukov <dvyukov@...gle.com>,
Brendan Higgins <brendanhiggins@...gle.com>
Cc: kasan-dev <kasan-dev@...glegroups.com>,
linux-um@...ts.infradead.org, LKML <linux-kernel@...r.kernel.org>,
Daniel Latypov <dlatypov@...gle.com>,
David Gow <davidgow@...gle.com>
Subject: [RFC PATCH v3] UML: add support for KASAN under x86_64
From: Patricia Alfonso <trishalfonso@...gle.com>
Make KASAN run on User Mode Linux on x86_64.
The UML-specific KASAN initializer uses mmap to map the roughly 2.25TB
of shadow memory to the location defined by KASAN_SHADOW_OFFSET.
kasan_init() utilizes constructors to initialize KASAN before main().
The location of the KASAN shadow memory, starting at
KASAN_SHADOW_OFFSET, can be configured using the KASAN_SHADOW_OFFSET
option. UML uses roughly 18TB of address space, and KASAN requires 1/8th
of this. The default location of this offset is 0x100000000000, which
keeps it out-of-the-way even on UML setups with more "physical" memory.
For low-memory setups, 0x7fff8000 can be used instead, which fits in an
immediate and is therefore faster, as suggested by Dmitry Vyukov. There
is usually enough free space at this location; however, it is a config
option so that it can be easily changed if needed.
Note that, unlike KASAN on other architectures, vmalloc allocations
still use the shadow memory allocated upfront, rather than allocating
and free-ing it per-vmalloc allocation.
Signed-off-by: Patricia Alfonso <trishalfonso@...gle.com>
Co-developed-by: Vincent Whitchurch <vincent.whitchurch@...s.com>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@...s.com>
Signed-off-by: David Gow <davidgow@...gle.com>
---
This is a new RFC for the KASAN/UML port, based on the patch v1:
https://lore.kernel.org/all/20200226004608.8128-1-trishalfonso@google.com/
With several fixes by Vincent Whitchurch:
https://lore.kernel.org/all/20220525111756.GA15955@axis.com/
That thread describes the differences from the v1 (and hence the
previous RFCs better than I can here), but the gist of it is:
- Support for KASAN_VMALLOC, by changing the way
kasan_{populate,release}_vmalloc work to update existing shadow
memory, rather than allocating anything new.
- A similar fix for modules' shadow memory.
- Support for KASAN_STACK
- This requires the bugfix here:
https://lore.kernel.org/lkml/20220523140403.2361040-1-vincent.whitchurch@axis.com/
- Plus a couple of files excluded from KASAN.
- Revert the default shadow offset to 0x100000000000
- This was breaking when mem=1G for me, at least.
- A few minor fixes to linker sections and scripts.
- I've added one to dyn.lds.S on top of the ones Vincent added.
There are still a few things to be sorted out before this is ready to go
upstream, in particular:
- We've got a bunch of checks for CONFIG_UML, where a more specific
config option might be better. For example: CONFIG_KASAN_NO_SHADOW_ALLOC.
- Alternatively, the vmalloc (and module) shadow memory allocators could
support per-architecture replacements.
- Do we want to the alignment before or after the __memset() in
kasan_populate_vmalloc()?
- This doesn't seem to work when CONFIG_STATIC_LINK is enabled (because
libc crt0 code calls memory functions, which expect the shadow memory
to already exist, due to multiple symbols being resolved.
- I think we should just make this depend on dynamic UML.
- For that matter, I think static UML is actually broken at the
moment. I'll send a patch out tomorrow.
- And there's a checkpatch complaint about a long __memset() line.
Thanks again to everyone who's contributed and looked at these patches!
Note that I removed the Reviewed-by tags, as I think this version has
enough changes to warrant a re-review.
-- David
---
arch/um/Kconfig | 15 +++++++++++++++
arch/um/Makefile | 6 ++++++
arch/um/include/asm/common.lds.S | 2 ++
arch/um/kernel/Makefile | 3 +++
arch/um/kernel/dyn.lds.S | 6 +++++-
arch/um/kernel/mem.c | 18 ++++++++++++++++++
arch/um/os-Linux/mem.c | 22 ++++++++++++++++++++++
arch/um/os-Linux/user_syms.c | 4 ++--
arch/x86/um/Makefile | 3 ++-
arch/x86/um/vdso/Makefile | 3 +++
mm/kasan/shadow.c | 20 +++++++++++++++++++-
11 files changed, 97 insertions(+), 5 deletions(-)
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 4d398b80aea8..c28ea5c89381 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -11,6 +11,8 @@ config UML
select ARCH_HAS_STRNLEN_USER
select ARCH_NO_PREEMPT
select HAVE_ARCH_AUDITSYSCALL
+ select HAVE_ARCH_KASAN if X86_64
+ select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ASM_MODVERSIONS
select HAVE_UID16
@@ -219,6 +221,19 @@ config UML_TIME_TRAVEL_SUPPORT
It is safe to say Y, but you probably don't need this.
+config KASAN_SHADOW_OFFSET
+ hex
+ depends on KASAN
+ default 0x100000000000
+ help
+ This is the offset at which the ~2.25TB of shadow memory is
+ mapped and used by KASAN for memory debugging. This can be any
+ address that has at least KASAN_SHADOW_SIZE(total address space divided
+ by 8) amount of space so that the KASAN shadow memory does not conflict
+ with anything. The default is 0x100000000000, which works even if mem is
+ set to a large value. On low-memory systems, try 0x7fff8000, as it fits
+ into the immediate of most instructions, improving performance.
+
endmenu
source "arch/um/drivers/Kconfig"
diff --git a/arch/um/Makefile b/arch/um/Makefile
index f2fe63bfd819..a98405f4ecb8 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -75,6 +75,12 @@ USER_CFLAGS = $(patsubst $(KERNEL_DEFINES),,$(patsubst -I%,,$(KBUILD_CFLAGS))) \
-D_FILE_OFFSET_BITS=64 -idirafter $(srctree)/include \
-idirafter $(objtree)/include -D__KERNEL__ -D__UM_HOST__
+# Kernel config options are not included in USER_CFLAGS, but the option for KASAN
+# should be included if the KASAN config option was set.
+ifdef CONFIG_KASAN
+ USER_CFLAGS+=-DCONFIG_KASAN=y
+endif
+
#This will adjust *FLAGS accordingly to the platform.
include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS)
diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S
index eca6c452a41b..fd481ac371de 100644
--- a/arch/um/include/asm/common.lds.S
+++ b/arch/um/include/asm/common.lds.S
@@ -83,6 +83,8 @@
}
.init_array : {
__init_array_start = .;
+ *(.kasan_init)
+ *(.init_array.*)
*(.init_array)
__init_array_end = .;
}
diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile
index 1c2d4b29a3d4..a089217e2f0e 100644
--- a/arch/um/kernel/Makefile
+++ b/arch/um/kernel/Makefile
@@ -27,6 +27,9 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_GENERIC_PCI_IOMAP) += ioport.o
+KASAN_SANITIZE_stacktrace.o := n
+KASAN_SANITIZE_sysrq.o := n
+
USER_OBJS := config.o
include arch/um/scripts/Makefile.rules
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index 2f2a8ce92f1e..2b7fc5b54164 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -109,7 +109,11 @@ SECTIONS
be empty, which isn't pretty. */
. = ALIGN(32 / 8);
.preinit_array : { *(.preinit_array) }
- .init_array : { *(.init_array) }
+ .init_array : {
+ *(.kasan_init)
+ *(.init_array.*)
+ *(.init_array)
+ }
.fini_array : { *(.fini_array) }
.data : {
INIT_TASK_DATA(KERNEL_STACK_SIZE)
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index 15295c3237a0..a32cfce53efb 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -18,6 +18,24 @@
#include <kern_util.h>
#include <mem_user.h>
#include <os.h>
+#include <linux/sched/task.h>
+
+#ifdef CONFIG_KASAN
+void kasan_init(void)
+{
+ /*
+ * kasan_map_memory will map all of the required address space and
+ * the host machine will allocate physical memory as necessary.
+ */
+ kasan_map_memory((void *)KASAN_SHADOW_START, KASAN_SHADOW_SIZE);
+ init_task.kasan_depth = 0;
+ os_info("KernelAddressSanitizer initialized\n");
+}
+
+static void (*kasan_init_ptr)(void)
+__section(".kasan_init") __used
+= kasan_init;
+#endif
/* allocated in paging_init, zeroed in mem_init, and unchanged thereafter */
unsigned long *empty_zero_page = NULL;
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index 3c1b77474d2d..8530b2e08604 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -17,6 +17,28 @@
#include <init.h>
#include <os.h>
+/*
+ * kasan_map_memory - maps memory from @start with a size of @len.
+ * The allocated memory is filled with zeroes upon success.
+ * @start: the start address of the memory to be mapped
+ * @len: the length of the memory to be mapped
+ *
+ * This function is used to map shadow memory for KASAN in uml
+ */
+void kasan_map_memory(void *start, size_t len)
+{
+ if (mmap(start,
+ len,
+ PROT_READ|PROT_WRITE,
+ MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE|MAP_NORESERVE,
+ -1,
+ 0) == MAP_FAILED) {
+ os_info("Couldn't allocate shadow memory: %s\n.",
+ strerror(errno));
+ exit(1);
+ }
+}
+
/* Set by make_tempfile() during early boot. */
static char *tempdir = NULL;
diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c
index 715594fe5719..cb667c9225ab 100644
--- a/arch/um/os-Linux/user_syms.c
+++ b/arch/um/os-Linux/user_syms.c
@@ -27,10 +27,10 @@ EXPORT_SYMBOL(strstr);
#ifndef __x86_64__
extern void *memcpy(void *, const void *, size_t);
EXPORT_SYMBOL(memcpy);
-#endif
-
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memset);
+#endif
+
EXPORT_SYMBOL(printf);
/* Here, instead, I can provide a fake prototype. Yes, someone cares: genksyms.
diff --git a/arch/x86/um/Makefile b/arch/x86/um/Makefile
index ba5789c35809..f778e37494ba 100644
--- a/arch/x86/um/Makefile
+++ b/arch/x86/um/Makefile
@@ -28,7 +28,8 @@ else
obj-y += syscalls_64.o vdso/
-subarch-y = ../lib/csum-partial_64.o ../lib/memcpy_64.o ../entry/thunk_64.o
+subarch-y = ../lib/csum-partial_64.o ../lib/memcpy_64.o ../entry/thunk_64.o \
+ ../lib/memmove_64.o ../lib/memset_64.o
endif
diff --git a/arch/x86/um/vdso/Makefile b/arch/x86/um/vdso/Makefile
index 5943387e3f35..8c0396fd0e6f 100644
--- a/arch/x86/um/vdso/Makefile
+++ b/arch/x86/um/vdso/Makefile
@@ -3,6 +3,9 @@
# Building vDSO images for x86.
#
+# do not instrument on vdso because KASAN is not compatible with user mode
+KASAN_SANITIZE := n
+
# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
KCOV_INSTRUMENT := n
diff --git a/mm/kasan/shadow.c b/mm/kasan/shadow.c
index a4f07de21771..d8c518bd0e7d 100644
--- a/mm/kasan/shadow.c
+++ b/mm/kasan/shadow.c
@@ -295,8 +295,14 @@ int kasan_populate_vmalloc(unsigned long addr, unsigned long size)
return 0;
shadow_start = (unsigned long)kasan_mem_to_shadow((void *)addr);
- shadow_start = ALIGN_DOWN(shadow_start, PAGE_SIZE);
shadow_end = (unsigned long)kasan_mem_to_shadow((void *)addr + size);
+
+ if (IS_ENABLED(CONFIG_UML)) {
+ __memset(kasan_mem_to_shadow((void *)addr), KASAN_VMALLOC_INVALID, shadow_end - shadow_start);
+ return 0;
+ }
+
+ shadow_start = ALIGN_DOWN(shadow_start, PAGE_SIZE);
shadow_end = ALIGN(shadow_end, PAGE_SIZE);
ret = apply_to_page_range(&init_mm, shadow_start,
@@ -466,6 +472,10 @@ void kasan_release_vmalloc(unsigned long start, unsigned long end,
if (shadow_end > shadow_start) {
size = shadow_end - shadow_start;
+ if (IS_ENABLED(CONFIG_UML)) {
+ __memset(shadow_start, KASAN_SHADOW_INIT, shadow_end - shadow_start);
+ return;
+ }
apply_to_existing_page_range(&init_mm,
(unsigned long)shadow_start,
size, kasan_depopulate_vmalloc_pte,
@@ -531,6 +541,11 @@ int kasan_alloc_module_shadow(void *addr, size_t size, gfp_t gfp_mask)
if (WARN_ON(!PAGE_ALIGNED(shadow_start)))
return -EINVAL;
+ if (IS_ENABLED(CONFIG_UML)) {
+ __memset((void *)shadow_start, KASAN_SHADOW_INIT, shadow_size);
+ return 0;
+ }
+
ret = __vmalloc_node_range(shadow_size, 1, shadow_start,
shadow_start + shadow_size,
GFP_KERNEL,
@@ -554,6 +569,9 @@ int kasan_alloc_module_shadow(void *addr, size_t size, gfp_t gfp_mask)
void kasan_free_module_shadow(const struct vm_struct *vm)
{
+ if (IS_ENABLED(CONFIG_UML))
+ return;
+
if (vm->flags & VM_KASAN)
vfree(kasan_mem_to_shadow(vm->addr));
}
--
2.36.1.124.g0e6072fb45-goog
Powered by blists - more mailing lists