| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220526181729.GK1790663@paulmck-ThinkPad-P17-Gen-1>
Date: Thu, 26 May 2022 11:17:29 -0700
From: "Paul E. McKenney" <paulmck@...nel.org>
To: "Zhang, Qiang1" <qiang1.zhang@...el.com>
Cc: "frederic@...nel.org" <frederic@...nel.org>,
"rcu@...r.kernel.org" <rcu@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] rcu: Remove debug_object_active_state() from
debug_rcu_head_queue/unqueue()
On Wed, May 25, 2022 at 11:33:46PM +0000, Zhang, Qiang1 wrote:
> On Fri, May 13, 2022 at 01:03:19AM +0000, Zhang, Qiang1 wrote:
> > On Tue, May 10, 2022 at 11:07:48AM +0800, Zqiang wrote:
> > > Currently, the double call_rcu() detected only need call
> > > debug_object_activate() to check whether the rcu head object is
> > > activated, the rcu head object usage state check is not necessary
> > > and when call rcu_test_debug_objects() the
> > > debug_object_active_state() will output same callstack as
> > > debug_object_activate(). so remove
> > > debug_object_active_state() to reduce the output of repeated callstack.
> > >
> > > Signed-off-by: Zqiang <qiang1.zhang@...el.com>
> > >
> > >Could you please post the output of the dmesg output of a failed check with your change?
> > >
> >
> > Original output:
> >
> > [ 0.818279] ODEBUG: activate active (active state 1) object type: rcu_head hint: 0x0
> > [ 0.818296] WARNING: CPU: 1 PID: 1 at lib/debugobjects.c:505 debug_print_object+0xd8/0xf0
> > [ 0.818301] Modules linked in:
> > [ 0.818304] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.18.0-rc6-next-20220511-yoctodev-standard+ #75
> > [ 0.818306] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
> > [ 0.818308] RIP: 0010:debug_print_object+0xd8/0xf0
> > [ 0.818311] Code: dd 40 9e 03 9d e8 48 62 a2 ff 4d 89 f9 4d 89 e8 44 89 e1 48 8b 14 dd 40 9e 03 9d 4c 89 f6 48 c7 c7 c0 93 03 9d e8 f6 1a b1 00 <0f> f
> > [ 0.818313] RSP: 0000:ffff88810033fad0 EFLAGS: 00010082
> > [ 0.818315] RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
> > [ 0.818317] RDX: 0000000000000002 RSI: 0000000000000004 RDI: ffffed1020067f4c
> > [ 0.818319] RBP: ffff88810033fb00 R08: ffffffff9b50d898 R09: fffffbfff3bf5c6d
> > [ 0.818320] R10: 0000000000000003 R11: fffffbfff3bf5c6c R12: 0000000000000001
> > [ 0.818322] R13: ffffffff9ce769a0 R14: ffffffff9d039a80 R15: 0000000000000000
> > [ 0.818324] FS: 0000000000000000(0000) GS:ffff888158880000(0000) knlGS:0000000000000000
> > [ 0.818327] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [ 0.818329] CR2: 0000000000000000 CR3: 000000017600e000 CR4: 00000000001506e0
> > [ 0.818330] Call Trace:
> > [ 0.818331] <TASK>
> > [ 0.818333] debug_object_activate+0x2b8/0x300
> > [ 0.818336] ? debug_object_assert_init+0x220/0x220
> > [ 0.818340] ? __kasan_check_write+0x14/0x20
> > [ 0.818343] call_rcu+0x98/0x1110
> > [ 0.818347] ? vprintk+0x4c/0x60
> > [ 0.818350] ? rcu_torture_fwd_cb_hist.cold+0xe9/0xe9
> > [ 0.818354] ? strict_work_handler+0x70/0x70
> > [ 0.818357] rcu_torture_init+0x18be/0x199e
> > [ 0.818361] ? srcu_init+0x133/0x133
> > [ 0.818364] ? __mutex_unlock_slowpath.isra.0+0x270/0x270
> > [ 0.818368] ? rcu_torture_barrier1cb+0x40/0x40
> > [ 0.818371] ? rcu_torture_barrier1cb+0x40/0x40
> > [ 0.818374] ? srcu_init+0x133/0x133
> > [ 0.818377] do_one_initcall+0xb3/0x300
> > [ 0.818380] ? initcall_blacklisted+0x150/0x150
> > [ 0.818382] ? parameq+0x70/0x90
> > [ 0.818385] ? __kasan_check_read+0x11/0x20
> > [ 0.818389] kernel_init_freeable+0x2b2/0x310
> > [ 0.818392] ? rest_init+0xf0/0xf0
> > [ 0.818396] kernel_init+0x1e/0x140
> > [ 0.818399] ret_from_fork+0x22/0x30
> > [ 0.818402] </TASK>
> > [ 0.818403] ---[ end trace 0000000000000000 ]---
> > [ 0.818405] ------------[ cut here ]------------
> > [ 0.818405] ODEBUG: active_state active (active state 1) object type: rcu_head hint: 0x0
> > [ 0.818421] WARNING: CPU: 1 PID: 1 at lib/debugobjects.c:505 debug_print_object+0xd8/0xf0
> > [ 0.818424] Modules linked in:
> > [ 0.818426] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.18.0-rc6-next-20220511-yoctodev-standard+ #75
> > [ 0.818428] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
> > [ 0.818430] RIP: 0010:debug_print_object+0xd8/0xf0
> > [ 0.818432] Code: dd 40 9e 03 9d e8 48 62 a2 ff 4d 89 f9 4d 89 e8 44 89 e1 48 8b 14 dd 40 9e 03 9d 4c 89 f6 48 c7 c7 c0 93 03 9d e8 f6 1a b1 00 <0f> f
> > [ 0.818435] RSP: 0000:ffff88810033fac0 EFLAGS: 00010086
> > [ 0.818437] RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
> > [ 0.818438] RDX: 0000000000000002 RSI: 0000000000000004 RDI: ffffed1020067f4a
> > [ 0.818440] RBP: ffff88810033faf0 R08: ffffffff9b50d898 R09: fffffbfff3bf5c6d
> > [ 0.818441] R10: 0000000000000003 R11: fffffbfff3bf5c6c R12: 0000000000000001
> > [ 0.818443] R13: ffffffff9ce769a0 R14: ffffffff9d039820 R15: 0000000000000000
> > [ 0.818445] FS: 0000000000000000(0000) GS:ffff888158880000(0000) knlGS:0000000000000000
> > [ 0.818448] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [ 0.818449] CR2: 0000000000000000 CR3: 000000017600e000 CR4: 00000000001506e0
> > [ 0.818451] Call Trace:
> > [ 0.818452] <TASK>
> > [ 0.818453] debug_object_active_state+0x1d6/0x210
> > [ 0.818456] ? debug_object_deactivate+0x210/0x210
> > [ 0.818460] ? __kasan_check_write+0x14/0x20
> > [ 0.818464] call_rcu+0xb7/0x1110
> > [ 0.818466] ? vprintk+0x4c/0x60
> > [ 0.818469] ? rcu_torture_fwd_cb_hist.cold+0xe9/0xe9
> > [ 0.818472] ? strict_work_handler+0x70/0x70
> > [ 0.818476] rcu_torture_init+0x18be/0x199e
> > [ 0.818479] ? srcu_init+0x133/0x133
> > [ 0.818482] ? __mutex_unlock_slowpath.isra.0+0x270/0x270
> > [ 0.818486] ? rcu_torture_barrier1cb+0x40/0x40
> > [ 0.818489] ? rcu_torture_barrier1cb+0x40/0x40
> > [ 0.818492] ? srcu_init+0x133/0x133
> > [ 0.818495] do_one_initcall+0xb3/0x300
> > [ 0.818497] ? initcall_blacklisted+0x150/0x150
> > [ 0.818500] ? parameq+0x70/0x90
> > [ 0.818503] ? __kasan_check_read+0x11/0x20
> > [ 0.818507] kernel_init_freeable+0x2b2/0x310
> > [ 0.818510] ? rest_init+0xf0/0xf0
> > [ 0.818513] kernel_init+0x1e/0x140
> > [ 0.818515] ret_from_fork+0x22/0x30
> > [ 0.818519] </TASK>
> > [ 0.818520] ---[ end trace 0000000000000000 ]---
> > [ 0.818521] rcu: call_rcu(): Double-freed CB 00000000e2817fcb->rcu_torture_leak_cb+0x0/0x10()!!! non-slab/vmalloc memory
> >
> >
> > After apply this patch:
> >
> > [ 0.647048] ODEBUG: activate active (active state 0) object type: rcu_head hint: 0x0
> > [ 0.647068] WARNING: CPU: 1 PID: 1 at lib/debugobjects.c:505 debug_print_object+0xd8/0xf0
> > [ 0.647073] Modules linked in:
> > [ 0.647075] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.18.0-rc6-next-20220511-yoctodev-standard+ #77
> > [ 0.647078] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
> > [ 0.647080] RIP: 0010:debug_print_object+0xd8/0xf0
> > [ 0.647083] Code: dd 80 9d 43 a2 e8 38 62 a2 ff 4d 89 f9 4d 89 e8 44 89 e1 48 8b 14 dd 80 9d 43 a2 4c 89 f6 48 c7 c7 00 93 43 a2 e8 f6 1a b1 00 <0f> 0b 83 05 7b 62f
> > [ 0.647085] RSP: 0000:ffff88810033fad0 EFLAGS: 00010082
> > [ 0.647088] RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
> > [ 0.647090] RDX: 0000000000000002 RSI: 0000000000000004 RDI: ffffed1020067f4c
> > [ 0.647091] RBP: ffff88810033fb00 R08: ffffffffa090d898 R09: fffffbfff467586d
> > [ 0.647093] R10: 0000000000000003 R11: fffffbfff467586c R12: 0000000000000000
> > [ 0.647095] R13: ffffffffa22769a0 R14: ffffffffa24399c0 R15: 0000000000000000
> > [ 0.647097] FS: 0000000000000000(0000) GS:ffff88815b880000(0000) knlGS:0000000000000000
> > [ 0.647100] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [ 0.647102] CR2: 0000000000000000 CR3: 000000002f20e000 CR4: 00000000001506e0
> > [ 0.647104] Call Trace:
> > [ 0.647104] <TASK>
> > [ 0.647106] debug_object_activate+0x2b8/0x300
> > [ 0.647110] ? debug_object_assert_init+0x220/0x220
> > [ 0.647114] ? __kasan_check_write+0x14/0x20
> > [ 0.647118] call_rcu+0x98/0x1100
> > [ 0.647121] ? vprintk+0x4c/0x60
> > [ 0.647125] ? rcu_torture_fwd_cb_hist.cold+0xe9/0xe9
> > [ 0.647129] ? strict_work_handler+0x50/0x50
> > [ 0.647133] rcu_torture_init+0x18be/0x199e
> > [ 0.647136] ? srcu_init+0x133/0x133
> > [ 0.647140] ? __mutex_unlock_slowpath.isra.0+0x270/0x270
> > [ 0.647144] ? rcu_torture_barrier1cb+0x40/0x40
> > [ 0.647148] ? rcu_torture_barrier1cb+0x40/0x40
> > [ 0.647151] ? srcu_init+0x133/0x133
> > [ 0.647155] do_one_initcall+0xb3/0x300
> > [ 0.647157] ? initcall_blacklisted+0x150/0x150
> > [ 0.647160] ? parameq+0x70/0x90
> > [ 0.647164] ? __kasan_check_read+0x11/0x20
> > [ 0.647167] kernel_init_freeable+0x2b2/0x310
> > [ 0.647171] ? rest_init+0xf0/0xf0
> > [ 0.647174] kernel_init+0x1e/0x140
> > [ 0.647177] ret_from_fork+0x22/0x30
> > [ 0.647181] </TASK>
> > [ 0.647182] ---[ end trace 0000000000000000 ]---
> > [ 0.647184] rcu: call_rcu(): Double-freed CB 000000009a684b70->rcu_torture_leak_cb+0x0/0x10()!!! non-slab/vmalloc memory
>
> >Very good, and thank you!
> >
> >Now suppose that someone passes a pointer to call_rcu(), but then invokes kfree() on that same object before the grace period ends.
> >Is the offending kfree() flagged?
> >
> >If the CONFIG_DEBUG_OBJECTS_FREE is enabled, the debug_check_no_obj_freed() will check wether the object is activated in kfree() If is activated, also output callstack.
> >
> >__debug_check_no_obj_freed()
> >{........
> > switch (obj->state) {
> > case ODEBUG_STATE_ACTIVE:
> > descr = obj->descr;
> > state = obj->state;
> > _spin_unlock_irqrestore(&db->lock, flags);
> > debug_print_object(obj, "free");
> > }
> >.........
> >}
> >
> >Hi Paul
> >
> >The __debug_check_no_obj_freed() only check obj->state, don't care obj->astate, the debug_object_active_state() is not necessary. If CONFIG_DEBUG_OBJECTS_FREE is not enabled, the kfree() will directly release it without check obj state.
> >
> >Any thoughts?
> >
> >Thanks,
> >Zqiang
>
> Hi Paul
>
> Sorry to bother you again, I think this change is still meaningful, or there is something I don't konw
> if I can give you some suggestions, I will be happy to accept.
My concern with this patch is that there might be some odd scenario
somewhere in which valuable debugging information is lost. Unfortunately,
I haven't had time to fully explore the space of possible sequences of
double-free and use-after-free bugs.
It -might- be OK, but I cannot prove it. Thoughts?
Thanx, Paul
> Thanks
> Zqiang
>
>
> >Thanks,
> >Zqiang
>
> >
> > Thanx, Paul
>
> > Thanks,
> > Zqiang
> >
> >
> >
> > > Thanx, Paul
> > >
> > > ---
> > > kernel/rcu/rcu.h | 13 +------------
> > > 1 file changed, 1 insertion(+), 12 deletions(-)
> > >
> > > diff --git a/kernel/rcu/rcu.h b/kernel/rcu/rcu.h index
> > > 15b96f990774..0604ecd16627 100644
> > > --- a/kernel/rcu/rcu.h
> > > +++ b/kernel/rcu/rcu.h
> > > @@ -179,27 +179,16 @@ static inline unsigned long rcu_seq_diff(unsigned long new, unsigned long old)
> > > */
> > >
> > > #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
> > > -# define STATE_RCU_HEAD_READY 0
> > > -# define STATE_RCU_HEAD_QUEUED 1
> > >
> > > extern const struct debug_obj_descr rcuhead_debug_descr;
> > >
> > > static inline int debug_rcu_head_queue(struct rcu_head *head) {
> > > - int r1;
> > > -
> > > - r1 = debug_object_activate(head, &rcuhead_debug_descr);
> > > - debug_object_active_state(head, &rcuhead_debug_descr,
> > > - STATE_RCU_HEAD_READY,
> > > - STATE_RCU_HEAD_QUEUED);
> > > - return r1;
> > > + return debug_object_activate(head, &rcuhead_debug_descr);
> > > }
> > >
> > > static inline void debug_rcu_head_unqueue(struct rcu_head *head) {
> > > - debug_object_active_state(head, &rcuhead_debug_descr,
> > > - STATE_RCU_HEAD_QUEUED,
> > > - STATE_RCU_HEAD_READY);
> > > debug_object_deactivate(head, &rcuhead_debug_descr); }
> > > #else /* !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
> > > --
> > > 2.25.1
> > >
Powered by blists - more mailing lists