[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220526203656.831126-1-krzysztof.kozlowski@linaro.org>
Date: Thu, 26 May 2022 22:36:56 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH] ARM: dts: ste: adjust whitespace around '='
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Output compared with dtx_diff and fdtdump.
---
arch/arm/boot/dts/ste-ab8500.dtsi | 6 +++---
arch/arm/boot/dts/ste-hrefv60plus.dtsi | 4 ++--
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 35137c6e52ee..dd30d08ccb9b 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -195,7 +195,7 @@ ab8500_charger {
"CH_WD_EXP",
"VBUS_CH_DROP_END";
monitored-battery = <&battery>;
- vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
io-channels = <&gpadc 0x03>,
<&gpadc 0x0a>,
<&gpadc 0x09>,
@@ -207,8 +207,8 @@ ab8500_charger {
};
ab8500_chargalg {
- compatible = "stericsson,ab8500-chargalg";
- monitored-battery = <&battery>;
+ compatible = "stericsson,ab8500-chargalg";
+ monitored-battery = <&battery>;
};
ab8500_usb: phy {
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 8f504edefd3f..e66fa59c2de6 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -353,11 +353,11 @@ lcd_hrefv60_mode: lcd_hrefv60 {
* Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
*/
hrefv60_cfg1 {
- pins ="GPIO65_F1";
+ pins = "GPIO65_F1";
ste,config = <&gpio_out_hi>;
};
hrefv60_cfg2 {
- pins ="GPIO66_G3";
+ pins = "GPIO66_G3";
ste,config = <&gpio_out_lo>;
};
};
--
2.34.1
Powered by blists - more mailing lists