| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220526204110.831805-1-krzysztof.kozlowski@linaro.org>
Date: Thu, 26 May 2022 22:41:08 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
arm@...nel.org, soc@...nel.org, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Lars Povlsen <lars.povlsen@...rochip.com>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
UNGLinuxDriver@...rochip.com, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 1/2] arm64: dts: microchip: adjust whitespace around '='
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Output compared with dtx_diff and fdtdump.
---
.../dts/microchip/sparx5_pcb134_board.dtsi | 200 +++++++++---------
.../dts/microchip/sparx5_pcb135_board.dtsi | 48 ++---
2 files changed, 124 insertions(+), 124 deletions(-)
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index 699256f1b9d8..bf12be5e8d84 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -546,164 +546,164 @@ phy64: ethernet-phy@64 {
&axi {
sfp_eth12: sfp-eth12 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp1>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp1>;
tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth13: sfp-eth13 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp2>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp2>;
tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth14: sfp-eth14 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp3>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp3>;
tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth15: sfp-eth15 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp4>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp4>;
tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth48: sfp-eth48 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp5>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp5>;
tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth49: sfp-eth49 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp6>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp6>;
tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth50: sfp-eth50 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp7>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp7>;
tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth51: sfp-eth51 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp8>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp8>;
tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth52: sfp-eth52 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp9>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp9>;
tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth53: sfp-eth53 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp10>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp10>;
tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth54: sfp-eth54 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp11>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp11>;
tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth55: sfp-eth55 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp12>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp12>;
tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth56: sfp-eth56 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp13>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp13>;
tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth57: sfp-eth57 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp14>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp14>;
tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth58: sfp-eth58 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp15>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp15>;
tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth59: sfp-eth59 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp16>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp16>;
tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth60: sfp-eth60 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp17>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp17>;
tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth61: sfp-eth61 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp18>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp18>;
tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth62: sfp-eth62 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp19>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp19>;
tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth63: sfp-eth63 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp20>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp20>;
tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
index d10a9172b529..ec90bda7ed6a 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -170,40 +170,40 @@ i2c_sfp4: i2c_sfp4 {
&axi {
sfp_eth60: sfp-eth60 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp1>;
- tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp1>;
+ tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
- los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth61: sfp-eth61 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp2>;
- tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp2>;
+ tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
- los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth62: sfp-eth62 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp3>;
- tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp3>;
+ tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
- los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth63: sfp-eth63 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp4>;
- tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp4>;
+ tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
- los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
};
};
--
2.34.1
Powered by blists - more mailing lists