| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220526204248.832139-2-krzysztof.kozlowski@linaro.org>
Date: Thu, 26 May 2022 22:42:48 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
arm@...nel.org, soc@...nel.org, Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 2/2] ARM: dts: qcom: adjust whitespace around '='
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Output compared with dtx_diff and fdtdump.
---
.../boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 16 +-
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 10 +-
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 14 +-
arch/arm/boot/dts/qcom-apq8064.dtsi | 150 +++++++++---------
arch/arm/boot/dts/qcom-ipq8064.dtsi | 32 ++--
arch/arm/boot/dts/qcom-mdm9615.dtsi | 6 +-
arch/arm/boot/dts/qcom-msm8660.dtsi | 112 ++++++-------
arch/arm/boot/dts/qcom-msm8960.dtsi | 54 +++----
.../dts/qcom-msm8974pro-fairphone-fp2.dts | 6 +-
9 files changed, 200 insertions(+), 200 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index ca9f73528196..beb2058fd116 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -24,9 +24,9 @@ reserved-memory {
ramoops@...00000{
compatible = "ramoops";
reg = <0x88d00000 0x100000>;
- record-size = <0x00020000>;
- console-size = <0x00020000>;
- ftrace-size = <0x00020000>;
+ record-size = <0x00020000>;
+ console-size = <0x00020000>;
+ ftrace-size = <0x00020000>;
};
};
@@ -98,8 +98,8 @@ s3 {
* tabla2x-slim-VDDIO_CDC
*/
s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
regulator-always-on;
};
@@ -349,9 +349,9 @@ reboot-mode {
compatible = "syscon-reboot-mode";
offset = <0x65c>;
- mode-normal = <0x77665501>;
- mode-bootloader = <0x77665500>;
- mode-recovery = <0x77665502>;
+ mode-normal = <0x77665501>;
+ mode-bootloader = <0x77665500>;
+ mode-recovery = <0x77665502>;
};
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index e068a8d0adf0..17a4f5a7083f 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -82,8 +82,8 @@ s3 {
};
s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
@@ -230,9 +230,9 @@ sdcc1: mmc@...00000 {
sdcc3: mmc@...80000 {
status = "okay";
vmmc-supply = <&v3p3_fixed>;
- pinctrl-names = "default";
- pinctrl-0 = <&card_detect>;
- cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&card_detect>;
+ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
};
/* WLAN */
sdcc4: mmc@...c0000 {
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 2638b380be20..ef4de9fec470 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -108,8 +108,8 @@ s3 {
};
s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
@@ -240,8 +240,8 @@ sata_phy0: phy@...00000 {
};
sata0: sata@...00000 {
- status = "okay";
- target-supply = <&pm8921_s4>;
+ status = "okay";
+ target-supply = <&pm8921_s4>;
};
/* OTG */
@@ -324,9 +324,9 @@ sdcc1: mmc@...00000 {
sdcc3: mmc@...80000 {
status = "okay";
vmmc-supply = <&pm8921_l6>;
- pinctrl-names = "default";
- pinctrl-0 = <&card_detect>;
- cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&card_detect>;
+ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
};
/* WLAN */
sdcc4: mmc@...c0000 {
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 34c0ba7fa358..b8736304a8f1 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -430,8 +430,8 @@ saw3: power-controller@...9000 {
};
sps_sic_non_secure: sps-sic-non-secure@...00000 {
- compatible = "syscon";
- reg = <0x12100000 0x10000>;
+ compatible = "syscon";
+ reg = <0x12100000 0x10000>;
};
gsbi1: gsbi@...40000 {
@@ -796,10 +796,10 @@ ref_muxoff: adc-channel@f {
};
qfprom: qfprom@...000 {
- compatible = "qcom,qfprom";
- reg = <0x00700000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
+ compatible = "qcom,qfprom";
+ reg = <0x00700000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
ranges;
tsens_calib: calib {
reg = <0x404 0x10>;
@@ -836,22 +836,22 @@ mmcc: clock-controller@...0000 {
};
l2cc: clock-controller@...1000 {
- compatible = "qcom,kpss-gcc", "syscon";
- reg = <0x2011000 0x1000>;
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x2011000 0x1000>;
};
rpm@...000 {
- compatible = "qcom,rpm-apq8064";
- reg = <0x108000 0x1000>;
- qcom,ipc = <&l2cc 0x8 2>;
+ compatible = "qcom,rpm-apq8064";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "ack", "err", "wakeup";
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ack", "err", "wakeup";
rpmcc: clock-controller {
- compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
+ compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
#clock-cells = <1>;
};
@@ -1004,39 +1004,39 @@ usb_hs4_phy: phy {
};
sata_phy0: phy@...00000 {
- compatible = "qcom,apq8064-sata-phy";
- status = "disabled";
- reg = <0x1b400000 0x200>;
- reg-names = "phy_mem";
- clocks = <&gcc SATA_PHY_CFG_CLK>;
- clock-names = "cfg";
- #phy-cells = <0>;
+ compatible = "qcom,apq8064-sata-phy";
+ status = "disabled";
+ reg = <0x1b400000 0x200>;
+ reg-names = "phy_mem";
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+ #phy-cells = <0>;
};
sata0: sata@...00000 {
- compatible = "qcom,apq8064-ahci", "generic-ahci";
- status = "disabled";
- reg = <0x29000000 0x180>;
- interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
-
- clocks = <&gcc SFAB_SATA_S_H_CLK>,
- <&gcc SATA_H_CLK>,
- <&gcc SATA_A_CLK>,
- <&gcc SATA_RXOOB_CLK>,
- <&gcc SATA_PMALIVE_CLK>;
- clock-names = "slave_iface",
- "iface",
- "bus",
- "rxoob",
- "core_pmalive";
-
- assigned-clocks = <&gcc SATA_RXOOB_CLK>,
- <&gcc SATA_PMALIVE_CLK>;
- assigned-clock-rates = <100000000>, <100000000>;
-
- phys = <&sata_phy0>;
- phy-names = "sata-phy";
- ports-implemented = <0x1>;
+ compatible = "qcom,apq8064-ahci", "generic-ahci";
+ status = "disabled";
+ reg = <0x29000000 0x180>;
+ interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc SFAB_SATA_S_H_CLK>,
+ <&gcc SATA_H_CLK>,
+ <&gcc SATA_A_CLK>,
+ <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ clock-names = "slave_iface",
+ "iface",
+ "bus",
+ "rxoob",
+ "core_pmalive";
+
+ assigned-clocks = <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ assigned-clock-rates = <100000000>, <100000000>;
+
+ phys = <&sata_phy0>;
+ phy-names = "sata-phy";
+ ports-implemented = <0x1>;
};
/* Temporary fixed regulator */
@@ -1076,18 +1076,18 @@ amba {
#size-cells = <1>;
ranges;
sdcc1: mmc@...00000 {
- status = "disabled";
- compatible = "arm,pl18x", "arm,primecell";
- pinctrl-names = "default";
- pinctrl-0 = <&sdcc1_pins>;
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdcc1_pins>;
arm,primecell-periphid = <0x00051180>;
- reg = <0x12400000 0x2000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
- max-frequency = <96000000>;
+ reg = <0x12400000 0x2000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
@@ -1096,36 +1096,36 @@ sdcc1: mmc@...00000 {
};
sdcc3: mmc@...80000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x12180000 0x2000>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <4>;
+ status = "disabled";
+ reg = <0x12180000 0x2000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <192000000>;
+ max-frequency = <192000000>;
no-1-8-v;
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
dma-names = "tx", "rx";
};
sdcc4: mmc@...c0000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x121c0000 0x2000>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <4>;
+ status = "disabled";
+ reg = <0x121c0000 0x2000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <48000000>;
+ max-frequency = <48000000>;
dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 808ea1862283..25ee50123d27 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1184,16 +1184,16 @@ amba: amba {
ranges;
sdcc1: mmc@...00000 {
- status = "disabled";
- compatible = "arm,pl18x", "arm,primecell";
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- reg = <0x12400000 0x2000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x12400000 0x2000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
- clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
- max-frequency = <96000000>;
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
@@ -1204,18 +1204,18 @@ sdcc1: mmc@...00000 {
};
sdcc3: mmc@...80000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x12180000 0x2000>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ reg = <0x12180000 0x2000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
- clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <192000000>;
+ max-frequency = <192000000>;
sd-uhs-sdr104;
sd-uhs-ddr50;
vqmmc-supply = <&vsdcc_fixed>;
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 8f0752ce1c7b..4993dcac0769 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -361,7 +361,7 @@ sdcc1: mmc@...80000 {
arm,primecell-periphid = <0x00051180>;
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
+ interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
@@ -381,7 +381,7 @@ sdcc2: mmc@...40000 {
status = "disabled";
reg = <0x12140000 0x2000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
+ interrupt-names = "cmd_irq";
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
@@ -411,7 +411,7 @@ rpm: rpm@...000 {
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "ack", "err", "wakeup";
+ interrupt-names = "ack", "err", "wakeup";
regulators {
compatible = "qcom,rpm-pm8018-regulators";
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 47b97daecef1..b9cded35b1cc 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -392,24 +392,24 @@ vibrator@4a {
};
l2cc: clock-controller@...2000 {
- compatible = "qcom,kpss-gcc", "syscon";
- reg = <0x02082000 0x1000>;
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x02082000 0x1000>;
};
rpm: rpm@...000 {
- compatible = "qcom,rpm-msm8660";
- reg = <0x00104000 0x1000>;
- qcom,ipc = <&l2cc 0x8 2>;
-
- interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "ack", "err", "wakeup";
+ compatible = "qcom,rpm-msm8660";
+ reg = <0x00104000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ack", "err", "wakeup";
clocks = <&gcc RPM_MSG_RAM_H_CLK>;
clock-names = "ram";
rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
+ compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
#clock-cells = <1>;
};
@@ -486,80 +486,80 @@ amba {
#size-cells = <1>;
ranges;
sdcc1: mmc@...00000 {
- status = "disabled";
- compatible = "arm,pl18x", "arm,primecell";
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- reg = <0x12400000 0x8000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
- max-frequency = <48000000>;
+ reg = <0x12400000 0x8000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <48000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc2: mmc@...40000 {
- status = "disabled";
- compatible = "arm,pl18x", "arm,primecell";
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- reg = <0x12140000 0x8000>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
- max-frequency = <48000000>;
+ reg = <0x12140000 0x8000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <48000000>;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc3: mmc@...80000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x12180000 0x8000>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <4>;
+ status = "disabled";
+ reg = <0x12180000 0x8000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <48000000>;
+ max-frequency = <48000000>;
no-1-8-v;
};
sdcc4: mmc@...c0000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x121c0000 0x8000>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <4>;
- max-frequency = <48000000>;
+ status = "disabled";
+ reg = <0x121c0000 0x8000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
+ max-frequency = <48000000>;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc5: mmc@...00000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x12200000 0x8000>;
- interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <4>;
+ status = "disabled";
+ reg = <0x12200000 0x8000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <48000000>;
+ max-frequency = <48000000>;
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 4a2d74cf01d2..19554f3b5196 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -148,19 +148,19 @@ clock-controller@...0000 {
};
l2cc: clock-controller@...1000 {
- compatible = "qcom,kpss-gcc", "syscon";
- reg = <0x2011000 0x1000>;
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x2011000 0x1000>;
};
rpm@...000 {
- compatible = "qcom,rpm-msm8960";
- reg = <0x108000 0x1000>;
- qcom,ipc = <&l2cc 0x8 2>;
+ compatible = "qcom,rpm-msm8960";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "ack", "err", "wakeup";
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ack", "err", "wakeup";
regulators {
compatible = "qcom,rpm-pm8921-regulators";
@@ -268,16 +268,16 @@ amba {
#size-cells = <1>;
ranges;
sdcc1: mmc@...00000 {
- status = "disabled";
- compatible = "arm,pl18x", "arm,primecell";
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- reg = <0x12400000 0x8000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
- max-frequency = <96000000>;
+ reg = <0x12400000 0x8000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
@@ -285,18 +285,18 @@ sdcc1: mmc@...00000 {
};
sdcc3: mmc@...80000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x12180000 0x8000>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <4>;
+ status = "disabled";
+ reg = <0x12180000 0x8000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <192000000>;
+ max-frequency = <192000000>;
no-1-8-v;
vmmc-supply = <&vsdcc_fixed>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
index 58cb2ce1e4df..670612b055bb 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
@@ -78,9 +78,9 @@ &blsp1_uart2 {
&imem {
reboot-mode {
- mode-normal = <0x77665501>;
- mode-bootloader = <0x77665500>;
- mode-recovery = <0x77665502>;
+ mode-normal = <0x77665501>;
+ mode-bootloader = <0x77665500>;
+ mode-recovery = <0x77665502>;
};
};
--
2.34.1
Powered by blists - more mailing lists