| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220526204258.832179-2-krzysztof.kozlowski@linaro.org>
Date: Thu, 26 May 2022 22:42:57 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
arm@...nel.org, soc@...nel.org, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Li Yang <leoyang.li@....com>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 2/2] ARM: dts: fsl: adjust whitespace around '='
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Output compared with dtx_diff and fdtdump.
---
arch/arm/boot/dts/imx51-ts4800.dts | 2 +-
arch/arm/boot/dts/imx6dl-plym2m.dts | 2 +-
arch/arm/boot/dts/imx6dl-prtvt7.dts | 2 +-
arch/arm/boot/dts/imx6dl-victgo.dts | 2 +-
arch/arm/boot/dts/imx6q-bosch-acc.dts | 2 +-
arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi | 4 ++--
arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi | 2 +-
arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi | 2 +-
arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi | 2 +-
arch/arm/boot/dts/imx7d-sdb.dts | 2 +-
arch/arm/boot/dts/imxrt1050.dtsi | 4 ++--
arch/arm/boot/dts/ls1021a-iot.dts | 2 +-
12 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
index 85654d6baf28..f7408722d68a 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -174,7 +174,7 @@ fpga_irqc: fpga-irqc@...00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_interrupt_fpga>;
interrupt-parent = <&gpio2>;
- interrupts= <9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
};
diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
index c4ce23d8ac9f..522660c912a0 100644
--- a/arch/arm/boot/dts/imx6dl-plym2m.dts
+++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
@@ -196,7 +196,7 @@ adc_ts: adc@0 {
compatible = "ti,tsc2046e-adc";
reg = <0>;
pinctrl-0 = <&pinctrl_tsc2046>;
- pinctrl-names ="default";
+ pinctrl-names = "default";
spi-max-frequency = <1000000>;
interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
#io-channel-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index b86deebef7b7..0a0b7acddfb2 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -344,7 +344,7 @@ adc_ts: adc@0 {
compatible = "ti,tsc2046e-adc";
reg = <0>;
pinctrl-0 = <&pinctrl_tsc>;
- pinctrl-names ="default";
+ pinctrl-names = "default";
spi-max-frequency = <1000000>;
interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
#io-channel-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
index 516ec915a911..779b52858a25 100644
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -144,7 +144,7 @@ adc_ts: adc@0 {
compatible = "ti,tsc2046e-adc";
reg = <0>;
pinctrl-0 = <&pinctrl_touchscreen>;
- pinctrl-names ="default";
+ pinctrl-names = "default";
spi-max-frequency = <1000000>;
interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
#io-channel-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6q-bosch-acc.dts b/arch/arm/boot/dts/imx6q-bosch-acc.dts
index 8768222e183e..731fbc7b317c 100644
--- a/arch/arm/boot/dts/imx6q-bosch-acc.dts
+++ b/arch/arm/boot/dts/imx6q-bosch-acc.dts
@@ -594,7 +594,7 @@ &wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog1>;
fsl,ext-reset-output;
- timeout-sec=<10>;
+ timeout-sec = <10>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
index 69ae430a53bd..8254bce1b8a2 100644
--- a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
@@ -15,13 +15,13 @@ touchscreen@0 {
reg = <0>;
spi-max-frequency = <1000000>;
interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
- vcc-supply = <®_3v3>;
+ vcc-supply = <®_3v3>;
pendown-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = /bits/ 16 <850>;
ti,y-plate-ohms = /bits/ 16 <295>;
ti,pressure-min = /bits/ 16 <2>;
ti,pressure-max = /bits/ 16 <1500>;
- ti,vref-mv = /bits/ 16 <3300>;
+ ti,vref-mv = /bits/ 16 <3300>;
ti,settle-delay-usec = /bits/ 16 <15>;
ti,vref-delay-usecs = /bits/ 16 <0>;
ti,penirq-recheck-delay-usecs = /bits/ 16 <100>;
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi
index caf2c5d03f7e..4b87e2dc70dc 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi
@@ -14,7 +14,7 @@ / {
};
&usdhc2 {
- fsl,tuning-step= <6>;
+ fsl,tuning-step = <6>;
};
&iomuxc {
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi
index 326e6da91ed4..8541cb3f3b3e 100644
--- a/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi
+++ b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi
@@ -14,7 +14,7 @@ / {
};
&usdhc2 {
- fsl,tuning-step= <6>;
+ fsl,tuning-step = <6>;
/* Errata ERR010450 Workaround */
max-frequency = <99000000>;
assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi
index 8e4d5cd18614..be593d47e3b1 100644
--- a/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi
+++ b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi
@@ -14,7 +14,7 @@ / {
};
&usdhc2 {
- fsl,tuning-step= <6>;
+ fsl,tuning-step = <6>;
/* Errata ERR010450 Workaround */
max-frequency = <99000000>;
assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index f053f5122741..78f4224a9bf4 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -201,7 +201,7 @@ tsc2046@0 {
compatible = "ti,tsc2046";
reg = <0>;
spi-max-frequency = <1000000>;
- pinctrl-names ="default";
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc2046_pendown>;
interrupt-parent = <&gpio2>;
interrupts = <29 0>;
diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi
index 77b911b06041..03e6a858a7be 100644
--- a/arch/arm/boot/dts/imxrt1050.dtsi
+++ b/arch/arm/boot/dts/imxrt1050.dtsi
@@ -83,7 +83,7 @@ edma1: dma-controller@...e8000 {
};
usdhc1: mmc@...c0000 {
- compatible ="fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
+ compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
reg = <0x402c0000 0x4000>;
interrupts = <110>;
clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
@@ -95,7 +95,7 @@ usdhc1: mmc@...c0000 {
no-1-8-v;
max-frequency = <4000000>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/ls1021a-iot.dts b/arch/arm/boot/dts/ls1021a-iot.dts
index 66bcdaf4b6f9..ce8e26d7791f 100644
--- a/arch/arm/boot/dts/ls1021a-iot.dts
+++ b/arch/arm/boot/dts/ls1021a-iot.dts
@@ -142,7 +142,7 @@ pca9555: gpio@23 {
};
sgtl5000: audio-codec@2a {
- #sound-dai-cells=<0x0>;
+ #sound-dai-cells = <0x0>;
compatible = "fsl,sgtl5000";
reg = <0x2a>;
VDDA-supply = <®_3p3v>;
--
2.34.1
Powered by blists - more mailing lists