lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Sat, 28 May 2022 19:00:15 +0800
From:   Baokun Li <libaokun1@...wei.com>
To:     <linux-ext4@...r.kernel.org>
CC:     <tytso@....edu>, <adilger.kernel@...ger.ca>, <jack@...e.cz>,
        <ritesh.list@...il.com>, <lczerner@...hat.com>,
        <linux-kernel@...r.kernel.org>, <yi.zhang@...wei.com>,
        <yebin10@...wei.com>, <yukuai3@...wei.com>, <libaokun1@...wei.com>,
        Hulk Robot <hulkci@...wei.com>
Subject: [PATCH v3 1/3] ext4: fix bug_on ext4_mb_use_inode_pa

Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
 ext4_mb_new_blocks+0x9df/0x5d30
 ext4_ext_map_blocks+0x1803/0x4d80
 ext4_map_blocks+0x3a4/0x1a10
 ext4_writepages+0x126d/0x2c30
 do_writepages+0x7f/0x1b0
 __filemap_fdatawrite_range+0x285/0x3b0
 file_write_and_wait_range+0xb1/0x140
 ext4_sync_file+0x1aa/0xca0
 vfs_fsync_range+0xfb/0x260
 do_fsync+0x48/0xa0
[...]
==================================================================

Above issue may happen as follows:
-------------------------------------
do_fsync
 vfs_fsync_range
  ext4_sync_file
   file_write_and_wait_range
    __filemap_fdatawrite_range
     do_writepages
      ext4_writepages
       mpage_map_and_submit_extent
        mpage_map_one_extent
         ext4_map_blocks
          ext4_mb_new_blocks
           ext4_mb_normalize_request
            >>> start + size <= ac->ac_o_ex.fe_logical
           ext4_mb_regular_allocator
            ext4_mb_simple_scan_group
             ext4_mb_use_best_found
              ext4_mb_new_preallocation
               ext4_mb_new_inode_pa
                ext4_mb_use_inode_pa
                 >>> set ac->ac_b_ex.fe_len <= 0
           ext4_mb_mark_diskspace_used
            >>> BUG_ON(ac->ac_b_ex.fe_len <= 0);

we can easily reproduce this problem with the following commands:
	`fallocate -l100M disk`
	`mkfs.ext4 -b 1024 -g 256 disk`
	`mount disk /mnt`
	`fsstress -d /mnt -l 0 -n 1000 -p 1`

The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.

Fixes: cd648b8a8fd5 ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@...wei.com>
Signed-off-by: Baokun Li <libaokun1@...wei.com>
---
V1->V2:
	Replace round_down() with rounddown().
	Modified comments.
V2->V3:
	Convert EXT4_BLOCKS_PER_GROUP type to ext4_lblk_t
	to avoid compilation warnings.

 fs/ext4/mballoc.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 9f12f29bc346..4d3740fdff90 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4104,6 +4104,15 @@ ext4_mb_normalize_request(struct ext4_allocation_context *ac,
 	size = size >> bsbits;
 	start = start_off >> bsbits;
 
+	/*
+	 * For tiny groups (smaller than 8MB) the chosen allocation
+	 * alignment may be larger than group size. Make sure the
+	 * alignment does not move allocation to a different group which
+	 * makes mballoc fail assertions later.
+	 */
+	start = max(start, rounddown(ac->ac_o_ex.fe_logical,
+			(ext4_lblk_t)EXT4_BLOCKS_PER_GROUP(ac->ac_sb)));
+
 	/* don't cover already allocated blocks in selected range */
 	if (ar->pleft && start <= ar->lleft) {
 		size -= ar->lleft + 1 - start;
-- 
2.31.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ