linux-kernel - Re: [PATCH v13 2/3] fpga: microchip-spi: add Microchip MPF FPGA manager

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 30 May 2022 15:36:27 +0000
From:   <Conor.Dooley@...rochip.com>
To:     <i.bornyakov@...rotek.ru>
CC:     <mdf@...nel.org>, <hao.wu@...el.com>, <yilun.xu@...el.com>,
        <trix@...hat.com>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <linux-fpga@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <system@...rotek.ru>
Subject: Re: [PATCH v13 2/3] fpga: microchip-spi: add Microchip MPF FPGA
 manager

On 30/05/2022 15:26, Ivan Bornyakov wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On Mon, May 30, 2022 at 02:26:18PM +0000, Conor.Dooley@...rochip.com wrote:
>> On 30/05/2022 13:07, Ivan Bornyakov wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>>
>>> On Mon, May 30, 2022 at 11:22:26AM +0000, Conor.Dooley@...rochip.com wrote:
>>>> On 26/05/2022 19:13, Ivan Bornyakov wrote:
>>>>> +static int mpf_read_status(struct spi_device *spi)
>>>>> +{
>>>>> +       u8 status = 0, status_command = MPF_SPI_READ_STATUS;
>>>>> +       /*
>>>>> +        * Two identical SPI transfers are used for status reading.
>>>>> +        * The reason is that the first one can be inadequate.
>>>>> +        * We ignore it completely and use the second one.
>>>>> +        */
>>>>> +       struct spi_transfer xfers[] = {
>>>>> +               [0 ... 1] = {
>>>>> +                       .tx_buf = &status_command,
>>>>> +                       .rx_buf = &status,
>>>>> +                       .len = 1,
>>>>> +                       .cs_change = 1,
>>>>> +               }
>>>>> +       };
>>>>
>>>> Hmm, I don't think that this is correct, or at least it is not
>>>> correct from the polarfire /soc/ perspective. I was told that
>>>> there was nothing different other than the envm between the
>>>> programming for both devices - but this is another situation
>>>> where I start to question that.
>>>>
>>>> When I run this code, ISC enable /never/ passes - failing due
>>>> to timing out. I see something like this picture here:
>>>> https://i.imgur.com/EKhd1S3.png
>>>> You can see the 0x0B ISC enable coming through & then a status
>>>> check after it.
>>>>
>>>> With the current code, the value of the "status" variable will
>>>> be 0x0, given you are overwriting the first MISO value with the
>>>> second. According to the hw guys, the spi hw status *should*
>>>> only be returned on MISO in the first byte after SS goes low.
>>>>
>>>> If this is not the case for a non -soc part, which, as I said
>>>> before, I don't have a board with the SPI programmer exposed
>>>> for & I have been told is not the case then my comments can
>>>> just be ignored entirely & I'll have some head scratching to
>>>> do...
>>>>
>>>> Thanks,
>>>> Conor.
>>>>
>>>
>>> If I understood correctly, SS doesn't alter between two status reading
>>> transactions despite .cs_change = 1. May be adding some .cs_change_delay
>>> to spi_transfer struct can help with that?
>>
>> D-oh - bug in the spi controller driver :)
> 
> So, no additional delay is needed?

Correct, programmed successfully without changing the delay.

>> LGTM now, successfully programmed my PolarFire SoC with v12.

Typo, this should be v13

>> I'd almost suggest adding a compatible for it too - but since
>> the envm programming doesn't work I don't think that would be
>> correct.
>>
>> Tested-by: Conor Dooley <conor.dooley@...rochip.com>
>>
>> With a small comment about why it's using spi_sync_transfer():
>> Reviewed-by: Conor Dooley <conor.dooley@...rochip.com>
>>
> 
> Thanks for your assistance, Conor!
> 
>>>
>>>>> +       int ret = spi_sync_transfer(spi, xfers, 2);
>>>>> +
>>>>> +       if ((status & MPF_STATUS_SPI_VIOLATION) ||
>>>>> +           (status & MPF_STATUS_SPI_ERROR))
>>>>> +               ret = -EIO;
>>>>> +
>>>>> +       return ret ? : status;
>>>>> +}
>>>
>>
>