| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2f126f4a-43e4-06ac-9df1-7e311f91c5d0@foss.st.com>
Date: Mon, 30 May 2022 09:45:55 +0200
From: Patrice CHOTARD <patrice.chotard@...s.st.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] ARM: dts: sti: adjust whitespace around '='
Hi Krzysztof
On 5/26/22 22:36, Krzysztof Kozlowski wrote:
> Fix whitespace coding style: use single space instead of tabs or
> multiple spaces around '=' sign in property assignment. No functional
> changes (same DTB).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
>
> ---
Reviewed-by: Patrice Chotard <patrice.chotard@...s.st.com>
Thanks
>
> Output compared with dtx_diff and fdtdump.
> ---
> arch/arm/boot/dts/stih407-family.dtsi | 174 +++++++++++++-------------
> arch/arm/boot/dts/stih407.dtsi | 4 +-
> arch/arm/boot/dts/stih410.dtsi | 4 +-
> arch/arm/boot/dts/stihxxx-b2120.dtsi | 8 +-
> 4 files changed, 95 insertions(+), 95 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> index 1713f7878117..33cf54cb46cc 100644
> --- a/arch/arm/boot/dts/stih407-family.dtsi
> +++ b/arch/arm/boot/dts/stih407-family.dtsi
> @@ -137,8 +137,8 @@ picophyreset: picophyreset-controller {
> };
>
> irq-syscfg {
> - compatible = "st,stih407-irq-syscfg";
> - st,syscfg = <&syscfg_core>;
> + compatible = "st,stih407-irq-syscfg";
> + st,syscfg = <&syscfg_core>;
> st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
> <ST_IRQ_SYSCFG_PMU_1>;
> st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
> @@ -157,8 +157,8 @@ usb2_picophy0: phy1 {
> miphy28lp_phy: miphy28lp {
> compatible = "st,miphy28lp-phy";
> st,syscfg = <&syscfg_core>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> ranges;
>
> phy_port0: port@...2000 {
> @@ -208,26 +208,26 @@ phy_port2: port@...5000 {
> };
>
> st231_gp0: st231-gp0 {
> - compatible = "st,st231-rproc";
> - memory-region = <&gp0_reserved>;
> - resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
> - reset-names = "sw_reset";
> - clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
> - clock-frequency = <600000000>;
> - st,syscfg = <&syscfg_core 0x22c>;
> + compatible = "st,st231-rproc";
> + memory-region = <&gp0_reserved>;
> + resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
> + reset-names = "sw_reset";
> + clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
> + clock-frequency = <600000000>;
> + st,syscfg = <&syscfg_core 0x22c>;
> #mbox-cells = <1>;
> mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
> mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
> };
>
> st231_delta: st231-delta {
> - compatible = "st,st231-rproc";
> - memory-region = <&delta_reserved>;
> - resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
> - reset-names = "sw_reset";
> - clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
> - clock-frequency = <600000000>;
> - st,syscfg = <&syscfg_core 0x224>;
> + compatible = "st,st231-rproc";
> + memory-region = <&delta_reserved>;
> + resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
> + reset-names = "sw_reset";
> + clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
> + clock-frequency = <600000000>;
> + st,syscfg = <&syscfg_core 0x224>;
> #mbox-cells = <1>;
> mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
> mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
> @@ -710,78 +710,78 @@ sata1: sata@...8000 {
>
>
> st_dwc3: dwc3@...4000 {
> - compatible = "st,stih407-dwc3";
> - reg = <0x08f94000 0x1000>, <0x110 0x4>;
> - reg-names = "reg-glue", "syscfg-reg";
> - st,syscfg = <&syscfg_core>;
> - resets = <&powerdown STIH407_USB3_POWERDOWN>,
> - <&softreset STIH407_MIPHY2_SOFTRESET>;
> - reset-names = "powerdown", "softreset";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_usb3>;
> + compatible = "st,stih407-dwc3";
> + reg = <0x08f94000 0x1000>, <0x110 0x4>;
> + reg-names = "reg-glue", "syscfg-reg";
> + st,syscfg = <&syscfg_core>;
> + resets = <&powerdown STIH407_USB3_POWERDOWN>,
> + <&softreset STIH407_MIPHY2_SOFTRESET>;
> + reset-names = "powerdown", "softreset";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb3>;
> ranges;
>
> status = "disabled";
>
> dwc3: dwc3@...0000 {
> - compatible = "snps,dwc3";
> - reg = <0x09900000 0x100000>;
> - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> - dr_mode = "host";
> - phy-names = "usb2-phy", "usb3-phy";
> - phys = <&usb2_picophy0>,
> - <&phy_port2 PHY_TYPE_USB3>;
> + compatible = "snps,dwc3";
> + reg = <0x09900000 0x100000>;
> + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> + dr_mode = "host";
> + phy-names = "usb2-phy", "usb3-phy";
> + phys = <&usb2_picophy0>,
> + <&phy_port2 PHY_TYPE_USB3>;
> snps,dis_u3_susphy_quirk;
> };
> };
>
> /* COMMS PWM Module */
> pwm0: pwm@...0000 {
> - compatible = "st,sti-pwm";
> - #pwm-cells = <2>;
> - reg = <0x9810000 0x68>;
> - interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
> - clock-names = "pwm";
> - clocks = <&clk_sysin>;
> + compatible = "st,sti-pwm";
> + #pwm-cells = <2>;
> + reg = <0x9810000 0x68>;
> + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
> + clock-names = "pwm";
> + clocks = <&clk_sysin>;
> st,pwm-num-chan = <1>;
>
> - status = "disabled";
> + status = "disabled";
> };
>
> /* SBC PWM Module */
> pwm1: pwm@...0000 {
> - compatible = "st,sti-pwm";
> - #pwm-cells = <2>;
> - reg = <0x9510000 0x68>;
> - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_pwm1_chan0_default
> - &pinctrl_pwm1_chan1_default
> - &pinctrl_pwm1_chan2_default
> - &pinctrl_pwm1_chan3_default>;
> - clock-names = "pwm";
> - clocks = <&clk_sysin>;
> + compatible = "st,sti-pwm";
> + #pwm-cells = <2>;
> + reg = <0x9510000 0x68>;
> + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1_chan0_default
> + &pinctrl_pwm1_chan1_default
> + &pinctrl_pwm1_chan2_default
> + &pinctrl_pwm1_chan3_default>;
> + clock-names = "pwm";
> + clocks = <&clk_sysin>;
> st,pwm-num-chan = <4>;
>
> - status = "disabled";
> + status = "disabled";
> };
>
> rng10: rng@...9000 {
> - compatible = "st,rng";
> - reg = <0x08a89000 0x1000>;
> - clocks = <&clk_sysin>;
> - status = "okay";
> + compatible = "st,rng";
> + reg = <0x08a89000 0x1000>;
> + clocks = <&clk_sysin>;
> + status = "okay";
> };
>
> rng11: rng@...a000 {
> - compatible = "st,rng";
> - reg = <0x08a8a000 0x1000>;
> - clocks = <&clk_sysin>;
> - status = "okay";
> + compatible = "st,rng";
> + reg = <0x08a8a000 0x1000>;
> + clocks = <&clk_sysin>;
> + status = "okay";
> };
>
> ethernet0: dwmac@...0000 {
> @@ -812,36 +812,36 @@ ethernet0: dwmac@...0000 {
> };
>
> mailbox0: mailbox@...0000 {
> - compatible = "st,stih407-mailbox";
> - reg = <0x8f00000 0x1000>;
> - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> - #mbox-cells = <2>;
> - mbox-name = "a9";
> - status = "okay";
> + compatible = "st,stih407-mailbox";
> + reg = <0x8f00000 0x1000>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + mbox-name = "a9";
> + status = "okay";
> };
>
> mailbox1: mailbox@...1000 {
> - compatible = "st,stih407-mailbox";
> - reg = <0x8f01000 0x1000>;
> - #mbox-cells = <2>;
> - mbox-name = "st231_gp_1";
> - status = "okay";
> + compatible = "st,stih407-mailbox";
> + reg = <0x8f01000 0x1000>;
> + #mbox-cells = <2>;
> + mbox-name = "st231_gp_1";
> + status = "okay";
> };
>
> mailbox2: mailbox@...2000 {
> - compatible = "st,stih407-mailbox";
> - reg = <0x8f02000 0x1000>;
> - #mbox-cells = <2>;
> - mbox-name = "st231_gp_0";
> - status = "okay";
> + compatible = "st,stih407-mailbox";
> + reg = <0x8f02000 0x1000>;
> + #mbox-cells = <2>;
> + mbox-name = "st231_gp_0";
> + status = "okay";
> };
>
> mailbox3: mailbox@...3000 {
> - compatible = "st,stih407-mailbox";
> - reg = <0x8f03000 0x1000>;
> - #mbox-cells = <2>;
> - mbox-name = "st231_audio_video";
> - status = "okay";
> + compatible = "st,stih407-mailbox";
> + reg = <0x8f03000 0x1000>;
> + #mbox-cells = <2>;
> + mbox-name = "st231_audio_video";
> + status = "okay";
> };
>
> /* fdma audio */
> @@ -913,7 +913,7 @@ sti_uni_player0: sti-uni-player@...0000 {
> dmas = <&fdma0 2 0 1>;
> dma-names = "tx";
>
> - status = "disabled";
> + status = "disabled";
> };
>
> sti_uni_player1: sti-uni-player@...1000 {
> diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
> index 9e212b0af89d..aca43d2bdaad 100644
> --- a/arch/arm/boot/dts/stih407.dtsi
> +++ b/arch/arm/boot/dts/stih407.dtsi
> @@ -13,7 +13,7 @@ sti-display-subsystem@0 {
> #address-cells = <1>;
> #size-cells = <1>;
> reg = <0 0>;
> - assigned-clocks = <&clk_s_d2_quadfs 0>,
> + assigned-clocks = <&clk_s_d2_quadfs 0>,
> <&clk_s_d2_quadfs 1>,
> <&clk_s_c0_pll1 0>,
> <&clk_s_c0_flexgen CLK_COMPO_DVP>,
> @@ -106,7 +106,7 @@ sti_hdmi: sti-hdmi@...4000 {
> reg-names = "hdmi-reg";
> #sound-dai-cells = <0>;
> interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "irq";
> + interrupt-names = "irq";
> clock-names = "pix",
> "tmds",
> "phy",
> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
> index ce2f62cf129b..a39dd5f7bcae 100644
> --- a/arch/arm/boot/dts/stih410.dtsi
> +++ b/arch/arm/boot/dts/stih410.dtsi
> @@ -105,7 +105,7 @@ sti-display-subsystem@0 {
> #size-cells = <1>;
>
> reg = <0 0>;
> - assigned-clocks = <&clk_s_d2_quadfs 0>,
> + assigned-clocks = <&clk_s_d2_quadfs 0>,
> <&clk_s_d2_quadfs 1>,
> <&clk_s_c0_pll1 0>,
> <&clk_s_c0_flexgen CLK_COMPO_DVP>,
> @@ -198,7 +198,7 @@ sti_hdmi: sti-hdmi@...4000 {
> reg-names = "hdmi-reg";
> #sound-dai-cells = <0>;
> interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "irq";
> + interrupt-names = "irq";
> clock-names = "pix",
> "tmds",
> "phy",
> diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> index 4c72dedcd1be..2aa94605d3d4 100644
> --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
> +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> @@ -175,11 +175,11 @@ demux@...0000 {
>
> /* tsin0 is TSA on NIMA */
> tsin0: port {
> - tsin-num = <0>;
> + tsin-num = <0>;
> serial-not-parallel;
> - i2c-bus = <&ssc2>;
> - reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
> - dvb-card = <STV0367_TDA18212_NIMA_1>;
> + i2c-bus = <&ssc2>;
> + reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
> + dvb-card = <STV0367_TDA18212_NIMA_1>;
> };
> };
>
Powered by blists - more mailing lists