[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <356624f3283f9203007ab21bedf15744d86e16f8.camel@mediatek.com>
Date: Mon, 30 May 2022 15:44:19 +0800
From: CK Hu <ck.hu@...iatek.com>
To: Guillaume Ranquet <granquet@...libre.com>,
Chun-Kuang Hu <chunkuang.hu@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
"David Airlie" <airlied@...ux.ie>, Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
Matthias Brugger <matthias.bgg@...il.com>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
"Kishon Vijay Abraham I" <kishon@...com>,
Vinod Koul <vkoul@...nel.org>, "Helge Deller" <deller@....de>,
Jitao shi <jitao.shi@...iatek.com>
CC: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Rex-BC Chen <rex-bc.chen@...iatek.com>,
<dri-devel@...ts.freedesktop.org>,
<linux-mediatek@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-phy@...ts.infradead.org>, <linux-fbdev@...r.kernel.org>
Subject: Re: [PATCH v10 07/21] drm/mediatek: dpi: implement a CK/DE pol
toggle in SoC config
Hi, Guillaume:
On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote:
> Adds a bit of flexibility to support SoCs without CK/DE pol support
It seems that DP_INTF has no CK/DE pol function. If so, could you
explain why DP_INTF has this difference with DPI?
Regards,
CK
>
> Signed-off-by: Guillaume Ranquet <granquet@...libre.com>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@...labora.com>
> Reviewed-by: Rex-BC Chen <rex-bc.chen@...iatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 22 +++++++++++++++++-----
> 1 file changed, 17 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 4746eb342567..545a1337cc89 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -125,6 +125,7 @@ struct mtk_dpi_conf {
> bool edge_sel_en;
> const u32 *output_fmts;
> u32 num_output_fmts;
> + bool is_ck_de_pol;
> const struct mtk_dpi_yc_limit *limit;
> };
>
> @@ -211,13 +212,20 @@ static void mtk_dpi_config_pol(struct mtk_dpi
> *dpi,
> struct mtk_dpi_polarities *dpi_pol)
> {
> unsigned int pol;
> + unsigned int mask;
>
> - pol = (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ? 0 : CK_POL)
> |
> - (dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ? 0 : DE_POL)
> |
> - (dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 :
> HSYNC_POL) |
> + mask = HSYNC_POL | VSYNC_POL;
> + pol = (dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 :
> HSYNC_POL) |
> (dpi_pol->vsync_pol == MTK_DPI_POLARITY_RISING ? 0 :
> VSYNC_POL);
> - mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol,
> - CK_POL | DE_POL | HSYNC_POL | VSYNC_POL);
> + if (dpi->conf->is_ck_de_pol) {
> + mask |= CK_POL | DE_POL;
> + pol |= (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ?
> + 0 : CK_POL) |
> + (dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ?
> + 0 : DE_POL);
> + }
> +
> + mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol, mask);
> }
>
> static void mtk_dpi_config_3d(struct mtk_dpi *dpi, bool en_3d)
> @@ -799,6 +807,7 @@ static const struct mtk_dpi_conf mt8173_conf = {
> .max_clock_khz = 300000,
> .output_fmts = mt8173_output_fmts,
> .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> + .is_ck_de_pol = true,
> .limit = &mtk_dpi_limit,
> };
>
> @@ -809,6 +818,7 @@ static const struct mtk_dpi_conf mt2701_conf = {
> .max_clock_khz = 150000,
> .output_fmts = mt8173_output_fmts,
> .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> + .is_ck_de_pol = true,
> .limit = &mtk_dpi_limit,
> };
>
> @@ -818,6 +828,7 @@ static const struct mtk_dpi_conf mt8183_conf = {
> .max_clock_khz = 100000,
> .output_fmts = mt8183_output_fmts,
> .num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
> + .is_ck_de_pol = true,
> .limit = &mtk_dpi_limit,
> };
>
> @@ -827,6 +838,7 @@ static const struct mtk_dpi_conf mt8192_conf = {
> .max_clock_khz = 150000,
> .output_fmts = mt8173_output_fmts,
> .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> + .is_ck_de_pol = true,
> .limit = &mtk_dpi_limit,
> };
>
Powered by blists - more mailing lists