[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220530100100.10420-1-r-ravikumar@ti.com>
Date: Mon, 30 May 2022 15:30:57 +0530
From: Rahul T R <r-ravikumar@...com>
To: <robh+dt@...nel.org>, <nm@...com>, <vigneshr@...com>,
<kishon@...com>, <krzysztof.kozlowski+dt@...aro.org>
CC: <lee.jones@...aro.org>, <rogerq@...nel.org>,
<devicetree@...r.kernel.org>, <kristo@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <s-anna@...com>,
Rahul T R <r-ravikumar@...com>
Subject: [PATCH v3 0/3] Enable RPi header on j721e sk
The following series of patches enables RPi header
on j721e sk. It is a 40 pin io expasion header which
brings out i2c5, ehrpwm 2,3 and some pins of gpio 0,1
v3:
- Change node name from clock to clock-controller
- Add correct description for clock-controller node
v2:
- Add full path for clock property $ref
- Remove the discription for clock pattern property,
since $ref is added
- Remove the label in the example
- Fix the indentation in the example
Rahul T R (1):
dt-bindings: mfd: ti,j721e-system-controller: Add clock property
Sinthu Raja (1):
arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header
Vijay Pothukuchi (1):
arm64: dts: ti: k3-j721e-*: Add dts nodes for EHRPWMs
.../mfd/ti,j721e-system-controller.yaml | 12 +++
.../dts/ti/k3-j721e-common-proc-board.dts | 24 +++++
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 62 ++++++++++-
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 101 +++++++++++++++++-
4 files changed, 193 insertions(+), 6 deletions(-)
--
2.17.1
Powered by blists - more mailing lists