linux-kernel - [PATCH v6 3/6] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220531234308.3317795-4-tanmay.shah@xilinx.com>
Date:   Tue, 31 May 2022 16:43:07 -0700
From:   Tanmay Shah <tanmay.shah@...inx.com>
To:     <openamp-system-reference@...ts.openampproject.org>,
        <bjorn.andersson@...aro.org>, <mathieu.poirier@...aro.org>,
        <robh+dt@...nel.org>, <krzk+dt@...nel.org>,
        <michal.simek@...inx.com>, <ben.levinsky@...inx.com>,
        <tanmay.shah@...inx.com>
CC:     <linux-remoteproc@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH v6 3/6] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.

From: Ben Levinsky <ben.levinsky@...inx.com>

Add ZynqMP firmware ioctl enums for RPU configuration and TCM Nodes for
later use via request_node and release_node

Signed-off-by: Ben Levinsky <ben.levinsky@...inx.com>
Signed-off-by: Tanmay Shah <tanmay.shah@...inx.com>
---

Changes in v6:
  - None

Changes in v5:
  - None

Changes in v4:
  - None

Changes in v3:
  - None


 include/linux/firmware/xlnx-zynqmp.h | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 14f00a7672d1..54331b726ab0 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -129,6 +129,10 @@ enum pm_ret_status {
 };
 
 enum pm_ioctl_id {
+	IOCTL_GET_RPU_OPER_MODE = 0,
+	IOCTL_SET_RPU_OPER_MODE = 1,
+	IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
+	IOCTL_TCM_COMB_CONFIG = 3,
 	IOCTL_SD_DLL_RESET = 6,
 	IOCTL_SET_SD_TAPDELAY = 7,
 	IOCTL_SET_PLL_FRAC_MODE = 8,
@@ -166,6 +170,21 @@ enum pm_query_id {
 	PM_QID_CLOCK_GET_MAX_DIVISOR = 13,
 };
 
+enum rpu_oper_mode {
+	PM_RPU_MODE_LOCKSTEP = 0,
+	PM_RPU_MODE_SPLIT = 1,
+};
+
+enum rpu_boot_mem {
+	PM_RPU_BOOTMEM_LOVEC = 0,
+	PM_RPU_BOOTMEM_HIVEC = 1,
+};
+
+enum rpu_tcm_comb {
+	PM_RPU_TCM_SPLIT = 0,
+	PM_RPU_TCM_COMB = 1,
+};
+
 enum zynqmp_pm_reset_action {
 	PM_RESET_ACTION_RELEASE = 0,
 	PM_RESET_ACTION_ASSERT = 1,
-- 
2.25.1