[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220531095108.21757-1-p-mohan@ti.com>
Date: Tue, 31 May 2022 15:21:06 +0530
From: Puranjay Mohan <p-mohan@...com>
To: <linux-kernel@...r.kernel.org>
CC: <davem@...emloft.net>, <edumazet@...gle.com>,
<krzysztof.kozlowski+dt@...aro.org>, <netdev@...r.kernel.org>,
<devicetree@...r.kernel.org>, <nm@...com>, <ssantosh@...nel.org>,
<s-anna@...com>, <p-mohan@...com>,
<linux-arm-kernel@...ts.infradead.org>, <rogerq@...nel.org>,
<grygorii.strashko@...com>, <vigneshr@...com>, <kishon@...com>,
<robh+dt@...nel.org>, <afd@...com>, <andrew@...n.ch>
Subject: [PATCH v2 0/2] Introduce ICSSG based ethernet Driver
The Programmable Real-time Unit and Industrial Communication Subsystem
Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI
SoCs. This subsystem is provided for the use cases like the implementation of
custom peripheral interfaces, offloading of tasks from the other
processor cores of the SoC, etc.
The subsystem includes many accelerators for data processing like
multiplier and multiplier-accumulator. It also has peripherals like
UART, MII/RGMII, MDIO, etc. Every ICSSG core includes two 32-bit
load/store RISC CPU cores called PRUs.
The above features allow it to be used for implementing custom firmware
based peripherals like ethernet.
This series adds the YAML documentation and the driver with basic EMAC
support for TI AM654 Silicon Rev 2 SoC with the PRU_ICSSG Sub-system.
running dual-EMAC firmware.
This currently supports basic EMAC with 1Gbps and 100Mbps link. 10M and
half-duplex modes are not yet supported because they require the support
of an IEP, which will be added later.
Advanced features like switch-dev and timestamping will be added later.
This series depends on two patch series that are not yet merged, one in
the remoteproc tree and another in the soc tree. the first one is titled
Introduce PRU remoteproc consumer API and the second one is titled
Introduce PRU platform consumer API.
Both of these are required for this driver.
To explain this dependency and to get reviews, I had earlier posted all
three of these as an RFC[1], this can be seen for understanding the
dependencies.
I then posted the remoteproc[2] and soc[3] series seperately to their
respective trees.
[1] https://lore.kernel.org/all/20220406094358.7895-1-p-mohan@ti.com/
[2] https://patchwork.kernel.org/project/linux-remoteproc/cover/20220418104118.12878-1-p-mohan@ti.com/
[3] https://patchwork.kernel.org/project/linux-remoteproc/cover/20220418123004.9332-1-p-mohan@ti.com/
[V1] https://lore.kernel.org/all/20220506052433.28087-1-p-mohan@ti.com/
Differences from V1 can be seen in the individual patches.
Thanks and Regards,
Puranjay Mohan
Puranjay Mohan (1):
dt-bindings: net: Add ICSSG Ethernet Driver bindings
Roger Quadros (1):
net: ti: icssg-prueth: Add ICSSG ethernet driver
.../bindings/net/ti,icssg-prueth.yaml | 181 ++
drivers/net/ethernet/ti/Kconfig | 15 +
drivers/net/ethernet/ti/Makefile | 3 +
drivers/net/ethernet/ti/icssg_classifier.c | 375 ++++
drivers/net/ethernet/ti/icssg_config.c | 440 ++++
drivers/net/ethernet/ti/icssg_config.h | 200 ++
drivers/net/ethernet/ti/icssg_ethtool.c | 319 +++
drivers/net/ethernet/ti/icssg_mii_cfg.c | 104 +
drivers/net/ethernet/ti/icssg_mii_rt.h | 151 ++
drivers/net/ethernet/ti/icssg_prueth.c | 1889 +++++++++++++++++
drivers/net/ethernet/ti/icssg_prueth.h | 246 +++
drivers/net/ethernet/ti/icssg_switch_map.h | 183 ++
include/linux/pruss.h | 1 +
13 files changed, 4107 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
create mode 100644 drivers/net/ethernet/ti/icssg_classifier.c
create mode 100644 drivers/net/ethernet/ti/icssg_config.c
create mode 100644 drivers/net/ethernet/ti/icssg_config.h
create mode 100644 drivers/net/ethernet/ti/icssg_ethtool.c
create mode 100644 drivers/net/ethernet/ti/icssg_mii_cfg.c
create mode 100644 drivers/net/ethernet/ti/icssg_mii_rt.h
create mode 100644 drivers/net/ethernet/ti/icssg_prueth.c
create mode 100644 drivers/net/ethernet/ti/icssg_prueth.h
create mode 100644 drivers/net/ethernet/ti/icssg_switch_map.h
--
2.17.1
Powered by blists - more mailing lists