[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPDyKFoRmpX5Pwmu370=tzg6ZAEPNm3LLAooXVLs35z94JsycQ@mail.gmail.com>
Date: Tue, 31 May 2022 15:38:24 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Sebastian Reichel <sebastian.reichel@...labora.com>
Cc: Heiko Stuebner <heiko@...ech.de>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Adrian Hunter <adrian.hunter@...el.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, linux-clk@...r.kernel.org,
linux-mmc@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, kernel@...ts.collabora.co.uk,
Yifeng Zhao <yifeng.zhao@...k-chips.com>, kernel@...labora.com
Subject: Re: [PATCHv2 09/21] mmc: sdhci-of-dwcmshc: add reset call back for
rockchip Socs
On Wed, 4 May 2022 at 23:33, Sebastian Reichel
<sebastian.reichel@...labora.com> wrote:
>
> From: Yifeng Zhao <yifeng.zhao@...k-chips.com>
>
> The reset function build in the SDHCI will not reset the logic
> circuit related to the tuning function, which may cause data
> reading errors. Resetting the complete SDHCI controller through
> the reset controller fixes the issue.
>
> Signed-off-by: Yifeng Zhao <yifeng.zhao@...k-chips.com>
> [rebase, use optional variant of reset getter]
> Acked-by: Adrian Hunter <adrian.hunter@...el.com>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.com>
Queued for v5.20 on the devel branch, thanks!
Kind regards
Uffe
> ---
> drivers/mmc/host/sdhci-of-dwcmshc.c | 26 +++++++++++++++++++++++++-
> 1 file changed, 25 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
> index bac874ab0b33..3a1b5ba36405 100644
> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> @@ -15,6 +15,7 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> +#include <linux/reset.h>
> #include <linux/sizes.h>
>
> #include "sdhci-pltfm.h"
> @@ -63,6 +64,7 @@
> struct rk3568_priv {
> /* Rockchip specified optional clocks */
> struct clk_bulk_data rockchip_clks[RK3568_MAX_CLKS];
> + struct reset_control *reset;
> u8 txclk_tapnum;
> };
>
> @@ -255,6 +257,21 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
> sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_STRBIN);
> }
>
> +static void rk35xx_sdhci_reset(struct sdhci_host *host, u8 mask)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct dwcmshc_priv *dwc_priv = sdhci_pltfm_priv(pltfm_host);
> + struct rk35xx_priv *priv = dwc_priv->priv;
> +
> + if (mask & SDHCI_RESET_ALL && priv->reset) {
> + reset_control_assert(priv->reset);
> + udelay(1);
> + reset_control_deassert(priv->reset);
> + }
> +
> + sdhci_reset(host, mask);
> +}
> +
> static const struct sdhci_ops sdhci_dwcmshc_ops = {
> .set_clock = sdhci_set_clock,
> .set_bus_width = sdhci_set_bus_width,
> @@ -269,7 +286,7 @@ static const struct sdhci_ops sdhci_dwcmshc_rk3568_ops = {
> .set_bus_width = sdhci_set_bus_width,
> .set_uhs_signaling = dwcmshc_set_uhs_signaling,
> .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> - .reset = sdhci_reset,
> + .reset = rk35xx_sdhci_reset,
> .adma_write_desc = dwcmshc_adma_write_desc,
> };
>
> @@ -292,6 +309,13 @@ static int dwcmshc_rk3568_init(struct sdhci_host *host, struct dwcmshc_priv *dwc
> int err;
> struct rk3568_priv *priv = dwc_priv->priv;
>
> + priv->reset = devm_reset_control_array_get_optional_exclusive(mmc_dev(host->mmc));
> + if (IS_ERR(priv->reset)) {
> + err = PTR_ERR(priv->reset);
> + dev_err(mmc_dev(host->mmc), "failed to get reset control %d\n", err);
> + return err;
> + }
> +
> priv->rockchip_clks[0].id = "axi";
> priv->rockchip_clks[1].id = "block";
> priv->rockchip_clks[2].id = "timer";
> --
> 2.35.1
>
Powered by blists - more mailing lists